• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.773-776
• /
• 2005

An Experiment was carried out to study deburring in frilling hole on the Inclined exit surface. Two different deburring tools, exit surface angles, materials and cutting conditions were selected to check their performance using CNC machining center. In deburring operation, there are not only flat exit surfaces but also inclined exit surfaces which is described as inclination angle. Inclination of exit surface causes a quite different burr formation when comparing with flat surface. Deburring characteristics are analyzed according to the deburring tools and cutting conditions. Several strategies for a effective deburring on inclined exit surface were proposed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.6
• /
• pp.1-9
• /
• 2021

In machining operations, a burr is an undesirable material formed by plastic deformation in a workpiece. With the ongoing industrial developments, it has become an important issue to efficiently remove burrs. Several deburring methods have been developed to remove specific burrs that require special machining. However, to remove burrs formed while machining at the CNC machining center, deburring tools must be developed. In a previous study, a new deburring tool was developed by the authors. In this study, the influence of the rake angle and stiffness of the new deburring tool was analyzed to improve performance. The theoretical model was driven considering the rake angle and stiffness, and experiments were carried out to validate the model. Especially, conditions based on the designed rake angle and stiffness to effectively remove burrs, which is difficult, at the exit surface were suggested.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.15-16
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.251-252
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.415-416
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.253-254
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.155-156
• /
• 2012

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.144-152
• /
• 2018

The cleanability of machine parts is becoming increasingly important in the industrial field. In particular, cleanability is the most important factor in hydraulic products. The burr and chips are dominant factors of cleanability. If the burrs are not removed completely before the beginning of the machining stage, this will cause many problems, such as scratches and operation failure. Due to the complexity of the valve body itself, it is very difficult to use common deburring tools. In this study, a brush-like deburring tool was suggested and verified as a proper tool for removing the burrs and forming a proper edge shape through a real experiment. Various kinds of brush materials and process conditions were tested for proper deburring of the valve body. It was shown that the suggested method was successful for valve body deburring.

• Journal of Drive and Control
• /
• v.12 no.3
• /
• pp.11-17
• /
• 2015

An intelligent deburring control (IDC) device is used to control the constant force for a deburring tool mounted on the end-effector of a robotic arm. This device maintains a constant contact force between the deburring tool and the workpiece in order to provide a good deburring performance. In this paper, we build a mathematical model in Matlab/Simulink to estimate the force control mechanism of the pneumatic system for the IDC device. The Simulink blocks are built for each separate part and are linked into an integrated simulation system. Such a model also relies on the effects of the flow rate through the valve, air compressibility in the cylinder, and time delay in the pressure valve. The results of the simulation are compared to a simple experiment in which convenient math modeling is performed. These results are then used to optimize the mechanical design and to develop a force control algorithm for the pneumatic cylinder.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.560-564
• /
• 1999

Burr sensing for burr size measurement and deburring process control is one of the essential elements in an automated deburring procedure. This paper presents the implementation of capacitance sensing and acoustic emission (AE) to deburring. The first application is the "on-line" measurement of burrs using a capacitance sensor. A non-contact capacitance gauging sensor is attached to an ultra precision milling machine which was used as a positioning system. The setup is used to measure burr profiles along machined workpiece edges. The proposed scheme is shown to be accurate, easy to setup, and with minor modifications, readily applicable to automatic deburring processes. As the second example, AE signals were sampled and analyzed for the sensor feedback of a precision deburring process - laser deburring -. The results, such as the sensitivity of AE signals to burr shapes and edge detection capability show a clear correlation between physical process parameters and the AE signals. A subsequent control strategy for deburring automation is also briefly discussed.