• Title/Summary/Keyword: Dawson's method

검색결과 9건 처리시간 0.017초

B-Spline 기저 고차경계요소법에 의한 자유수면하의 2차원 물체주위 유동해석 (Analysis of Steady Flow Around a Two-Dimensional Body Under the Free Surface Using B-Spline Based Higher Order Panel Method)

  • 유재문;김양익
    • 대한조선학회논문집
    • /
    • 제39권1호
    • /
    • pp.8-15
    • /
    • 2002
  • B-spline을 이용하여 물체의 형상과 포텐셜을 표현함으로써, 저차경계요소법의 단점들을 극복하고 수치계산의 정도를 높이기 위한 고차 패널법을 개발하였다. 물체표면과 자유표면에 법선 다이폴과 쏘스를 분포시켰으며, 자유표면 및 방사조건을 만족시키기 위해 상류차분식을 사용하는 대신 B-spline의 기저함수를 미분하여 선형화된 자유표면 경계조건에 직접 적용하였다. 이 방법을 적용함으로써 Dawson 방법에서 문제가 되었던 수치감쇠 문제를 피할 수 있었다. 수치계산 프로그램을 검증하기 위해 2차원 원주주위의 유동계산과 날개면 주위의 유동해석을 수행하였으며, B-spline 기저 고차패널법에 의한 수치계산 결과가 저차패널법에 비해 빠른 수렴성과 정확성을 보였고 계산에 필요한 패널 수가 현저히 줄어드는 대단히 만족스러운 결과를 얻었다.

패널법을 이용한 유한수심에서의 조파저항 계산 (Computation of Wave Resistance in the Water of Finite Depth Using a Panel Method)

  • 이승준
    • 대한조선학회논문집
    • /
    • 제29권4호
    • /
    • pp.66-74
    • /
    • 1992
  • 유한수심의 해역에서 운동하는 잠수체 혹은 부유체의 조파저항을 계산하기 위하여 Hess & Smith(1962)와 Dawson(1977)류의 패널법을 개발하였다. 수면상에서의 경계조건은 소위 Poisson 식을 사용하였는데, 비슷한 문제에 대해 Yasukawa(1989)는 이중물체유동을 기본유동으로 하는 Damson식을 사용한 바 있다. 수저면에서의 경계조건을 자동적으로 만족시키기 위하여 Rankine 쏘오스와 수저면에 대한 경상 쏘오스의 합을 Green 함수로 취하였으며, 따라서 특이점은 선체와 자유표면 상에만 분포시키면 되므로 필요한 패널의 수는 Yasukawa의 방법에 비해 절반이하로 감소되었다. 계산예로서는 잠수한 구와 Wigley선형을 택하였으며, 기존의 해석해 및 수치해와 비교하여 잘 일치하는 결과를 얻었다.

  • PDF

조파저항 계산을 위한 실용적인 방법 (A Practical Method for Computing Wave Resistance)

  • 이승준
    • 대한조선학회논문집
    • /
    • 제31권1호
    • /
    • pp.111-120
    • /
    • 1994
  • 본 논문은 Van & Lee[1]의 후속 연구이다. [1]에서 얻어진 결과 중 제대로 설명되지 못했던 부분에 대한 논의를 하고, Tulin[2]의 엄밀해에 대해 간략하게 살펴보았다. 다음 Tulin의 엄밀해를 2차항까지 근사한 2차이론을 사용하여 2차원 몰수체가 저속으로 운동하는 경우에 대해 Poisson 형태와 Dawson[3] 형태의 자유표면조건이 얼마나 정확한 해를 주는지 알아보고자 하였다. 결과적으로 보다 나은 결과를 줄 수 있는 자유표면조건이 필요함을 보이고, 순전히 수치적인 관점에서 새로운 자유표면조건을 유도하였으며, 이를 사용하여 만족할 만한 결과를 얻을 수 있음을 보였다.

  • PDF

패널법을 이용한 일반 상선의 비선형 조파문제 해석 (Analysis of the Nonlinear Wave-Making Problem of Practical Hull Forms Using Panel Method)

  • 김도현;김우전;반석호
    • 대한조선학회논문집
    • /
    • 제37권4호
    • /
    • pp.1-10
    • /
    • 2000
  • 일반 상선의 비선형 조파문제를 해석하기 위해 상방향 패널법에 기반을 둔 패널법을 개발하였다. 먼저 현재의 비선형 방법의 검증을 위해 많은 실험값이 존재하는 Series 60 선형에 개발된 방법을 적용하였다. 실제적인 응용의 경우로 KRISO 3600TEU 컨테이너선과 KRISO 300K 유조선에 개발된 방법을 적용하였다. 특히 두 상선이 유기하는 파계의 비선형성에 중점을 두고 계산된 파계를 KRISO의 실험값과 비교, 검증하였다. 현재의 비선형 방법은 Dawson의 방법이나 Neumann-Kelvin해와 같은 선형 방법에 비해 월등히 그 결과가 좋음이 확인되었다.

  • PDF

조파저항 계산을 위한 자유표면 조건의 비교 (Comparison of Free-Surface Boundary Conditions for Computing Wave Resistance)

  • 반석호;이승준
    • 대한조선학회논문집
    • /
    • 제30권2호
    • /
    • pp.54-65
    • /
    • 1993
  • Poisson[1], Ogilvie[2], Dawson[3] 등에 의해 사용된 자유표면에서의 경계조건을 2차원 몰수체를 대상으로 택하여 동일한 패널법을 이용, 비교검토하였다. 또한 Poisson 경계조건을 사용하여 몰수된 구와 Wigley 선형에 대해 구한 결과도 나타내었다. 결론적으로 검토된 경계조건들보다는 더 정확한 결과를 줄 수 있고, 또 엄밀한 비선형 경계조건 보다는 보다 실용성있는 경계조건을 새로이 유도할 필요가 있는 것으로 생각된다.

  • PDF

AZ31 마그네슘 합금의 온간 후방압출에서 변형특성과 결함성장에 관한 유한요소해석 (Finite Element Study on Deformation Characteristics and Damage Evolution in Warm Backward Extrusion of AZ31 Mg Alloys)

  • 윤덕재;김응주;이용신
    • 소성∙가공
    • /
    • 제16권8호
    • /
    • pp.614-620
    • /
    • 2007
  • Deformation characteristics and damage evolution during warm backward extrusion of bulk AZ31 Mg alloy were investigated using finite element analyses. AZ31 Mg alloy was assumed as a hardening viscoplastic material. The tensile tests of AZ31 Mg alloy in previous experimental works showed the ductile fracture even at the warm temperature of $175^{\circ}C$. In this study, damage evolution model proposed by Lee and Dawson, which was developed based on the growth of micro voids in hardening viscoplastic materials, was combined into DEFORM 2D. Effects of forming temperature, punch speed, extrusion ratio and size of work piece on formability in warm backward extrusion as well as on mechanical properties of extruded products were examined. In general, finite element predictions matched the experimental observations and supported the analyses based on experiments. Distributions of accumulated damage predicted by the finite element simulations were effective to identify the locations of possible fracture. Finally, it was concluded that the process model, DEFORM2D combined with Lee & Dawson#s damage evolution model, was effective for the analysis of warm backward extrusion of AZ31 Mg alloys.

Calculation of Wavemaking Resistance of High Speed Catamaran Using a Panel Method

  • Lee, Seung-Joon;Joo, Young-Ryeol
    • Journal of Hydrospace Technology
    • /
    • 제2권2호
    • /
    • pp.36-43
    • /
    • 1996
  • In this work, a panel method is described, which cart solve the flow field round a surface-piercing body that experiences lift and wave resistance. As the body boundary condition, a Dirichlet type is employed, and as the free surface boundary condition the Poisson type is implemented, while in its discretization Dawson's 4-point upwind difference scheme is utilized, and as the Kutta condition a Morino-Kuo type is chosen. As to the type of singularity, source panels are distributed on the free surface, and source and dipole panels on the body surface, and dipole panels on the wake surface. For a sample run, a catamaran of the parabolic Wigley hull is chosen, for which experimental data are available, and the predictions by the numerical means and by the experiment are compared for a wide range of parameters.

  • PDF

하악안정위 유도에 관한 근전도학적 연구 (An Electromyographic Study on Mandibular Rest Position Induced by Several Methods)

  • Chang Jung;Kyung-Soo Han;Min Shin
    • Journal of Oral Medicine and Pain
    • /
    • 제18권2호
    • /
    • pp.121-130
    • /
    • 1993
  • Mandibular rest position is very essential position because in that position, masticatory muscularture can be reciprocally coordinative and unstrained. So obtaining a good ability to establish and maintain rest position in non-functioning state is mandatory for treatment of patient with craniomandibular disorders. In general, many types of mandibulr movement exercise start from rest position and use the sense of muscle relearning, that is, muscle smoothness and relaxation, throughout the exercise period. In this study, 44 normal subjects for control group and 37 patients with craniomandibular disorders for experimental group participated and they were classified into 3 subgroups, respectively. One method to guide mandibular rest position was used for one subgroup, so theree methods were used for this study, 1)self-guided rest position without any education, 2) guided by Rocabado's tongue rest position, 3) guided through swallowing after Dawson's centric relation. To record electromyographic activity, Bioelectric processor EM2 (Myotronics, U.S.A.) was used. The numbers of sessions from start to stable resting electromyographic level and muscle activities in stable state were recorded and two recordings which were first and second, 3 days after first recording, were done, The data were processed with SPSS/PC+package. The obtained results were as follows : 1. Mean number of sessions in second recording were fewer than those in first recording in both groups. In comparison among 3 subgroups, mean number of sessions of subgroup guided through Dawson's method were fewer than those of other groups though it is not statistically significant. 2. There was a difference of mean number of sessions between control and experimental group in first recording, but in second recording there was no difference in any cases. 3. Mean value of muscle activity were generally not different without regard to group and method if once come to stable resting position level. Mean value of muscle activity of guided subgroups showed a tendency of decreasing in second recording than in first recording. However, in self-guided subgroup there was a inconsistent pattern. 4. The amounts of change in session number from first to second recording in control group were fewer than those in experimental group.

  • PDF

Rankine 소오스 패널법을 이용한 소수선면 쌍동선의 조파저항계산 (Calculation of the Wave Resistance of SWATH Ships using Rankine Source Panel Methods)

  • 전호환;이명휘;주영렬;장학수
    • 대한조선학회논문집
    • /
    • 제34권2호
    • /
    • pp.27-38
    • /
    • 1997
  • 본 논문에서는 Rankine Source 분포법에 의해 SWATH선의 조파저항 계산을 시도하였다. 자유표변조건은 이중모형근사형(Dawson형)의 자유표면조건과 free stream에 의한 근사형(Kelvin형)을 사용하고, 각각의 경우에 유한 차분법이 아닌 해석적인 방법을 사용하여 수치해석을 하였다. 위 두 가지 패널방법에 의한 수치계산결과, 얇은배 이론과 수정 세장체이론에 의한 계산결과 및 시험 탠값과의 비교를 통하여 각 방법의 특성을 논하였다. 저항실험은 단독형 스트러스와 탠덤값(tendem) 스트러트 SWATH선에 대해서 하였으며, 두 선체간의 거리변화에 따른 결과도 포함시켰다. 개발된 프로그램의 검증을 위해서 Wigley 단독선형 및 쌍동선형에 대해서 계산을 수행하여 발표된 시험결과와 비교하였다. Wigley 단독선형, 쌍동선형 및 SWATH 선형에 대해서 계산한 조파저항 값과 시험값, 관측한 파형과 계산한 파형을 비교하였다.

  • PDF