• Clinical and Experimental Reproductive Medicine
• /
• v.35 no.3
• /
• pp.213-221
• /
• 2008

Objective: To evaluate predictor of IVF outcomes following single embryo transfer in patients with decreased ovarian reserve. Methods: A retrospective review was performed in 919 IVF cycles with elevated basal serum FSH (${\geq}12\;mIU/mL$), the number of retrieved oocytes ${\geq}4$ and serum $E_2$ concentration on hCG day <500 pg/ml between Jan. 1996 and Dec. 2006. Two hundred thirty five IVF cycles following single embryo transfer were included. Pregnancy rates and live birth rates was evaluated according to maternal age, serum $E_2$ on hCG day, basal FSH level, the number of blastomere on day 3 ET, stimulation protocol, the number of cycles of ET. Statistical analysis was used SPSS 12.0 program. Results: OPU cancellation rates were 25.6% (235 cycles), OPU failure rates were 18.5% (170 cycles), embryo transfer cancellation rates were 14.0% (129 cycles). Pregnancy rates following single embryo transfer was 8.1% (19 cycles) and live birth rates was 4.7% (11 cycles). Pregnancy rates and live birth rates of women under 35 years old was statistically higher than those of women above 35 years old (20% vs. 3.5% (p<0.0001), 12.3% vs. 1.8%, (p=0.002)). There was no difference in basal FSH, serum $E_2$ on hCG day, and the number of blastomere on ET, and stimulation protocol. Cumulative pregnancy rates according to the number of cycles of ET were $1^{st}$ 8.1%, $2^{nd}$ 9.2%, $3^{rd}$ 9.7%, $4^{th}$ 9.0%, and $5^{th}$ 9.5%. Conclusion: Pregnancy rates and live birth rates of IVF-ET cycles following single embryo transfer in patients with decreased ovarian reserve are statistically increased in women under 35 yrs old. There is no difference in cumulative pregnancy rates. These data may be helpful for counseling women with decreased ovarian reserve in attempting IVF with their own eggs or when choosing donor oocytes.

• Korean Journal of Environment and Ecology
• /
• v.25 no.4
• /
• pp.601-613
• /
• 2011

The purpose of this study is to provide an protected wildlife species and potential habitats in Seoul through the overall present status of the species which live in Seoul. This study was performed in Seoul, the entire area of which is 605.52 $km^2$. We analyzed a total of 57 studies, including academic papers and research reports, for the natural ecology in Seoul. As for the results from the study, it was found that a total 1,907 species from 5 taxa were inhabiting and growing within the area. Among the total, plants of 1,656 species accounted for 86.7%, 197 species of wild birds made up 10.3%, 29 species of amphibians and reptiles consisted of 1.5%, and 27 species of mammalia totaled 1.4%. A total of 440 species except foreign species and species legally preserved by the Ministry of Environment, common species and uncertain species were selected as primary candidates. By taxon, it shows 212 species of plants, 180 species of wild birds, 24 species of mammalia, and 24 species of amphibians and reptiles. For extensive research subjects and research data limited in certain insect family, analysis by literature for discovered insects was excluded. The selection criteria for the second candidate species was based on extinction crisis, rarity, historicity and locality, academic value, habitat specificity, etc. The second candidate species from the primary species were selected through taxon experts' evaluations. As for the results of the selection of the second candidates, a total 77 species were selected through the experts' evaluations. Each species by taxon was 25 species for plants, 21 species for wild birds, 5 for mammalia, 10 for amphibians and reptiles and 16 species for insects. A site investigation for the second candidates was conducted to select the final candidate species. For the target areas, the habitats of the second candidates given by the literature and 46 potential areas in Seoul, which show good natural resistance, were finally selected. From the result of the site investigation, it was found that 14 species of plants, 19 species of wild birds, 2 species of mammalia, 4 species of amphibians and reptiles, and 16 species of insects were actually inhabiting Seoul; thus, the final 55 protected species were selected.

• Management & Information Systems Review
• /
• v.35 no.1
• /
• pp.189-206
• /
• 2016

It was required to attach the documents on the details of external audit including the number of the participants in external audit, audited parts and audit times under the Article 7-2 on the audit report to the accounting audit report from 2014 in accordance with the amendment to the Act on External Audit of Stock Companies. This study aim to calculate the audit fee based on the estimated cost of service calculation of the government contribution agencies by reflecting the implementation of the revised external audit. This study calculated the audit fee for the target company (a listed company assumed to have no internal control risks and relevant audit risks for unqualified opinion in the previous year, 100 billion won of total amount of asset, manufacturing company in the previous year and preliminary client request) by putting together four items of expenditure including employment costs, expenditure, general management expenses and profit in accordance with the calculation system of cost of service under the State Contract Act. Then, it used the data collected from the documents on the details of the revised external audit after requesting estimation on the target company with the estimated cost to Big-4 accounting firms to identify the participants and times of the accounting audit. The employment costs applied 150% of participation rate of the base price of employment costs for the academic research service cost in 2014, the expenditure used the average value of accounting firms of corporate business management analysis of the Bank of Korea (2013), the general management expenses applied 5% of the general management rate of service business under Article 7-1 of the Enforcement Rule of the Act on Contracts to which the State is a Party and the profit applied 10% of profit rate of service business under Article 7-2 of the Enforcement Rule of the Act on Contracts to which the State is a Party. Based on the calculation of the estimated costs by applying the above, the audit fee was estimated at 50,617,769won. Although the result is not the optimal audit fee, it may be used as a basic scale to compare the audit fees of companies without criteria. Also, such amendment to the Act on External Audit of Stock Companies may improve independence of auditors and transparency of the accounting system rather than previous announcing only the total audit times.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.48-54
• /
• 2010

Purpose: The objective of this study was to evaluate and compare the accuracy of impression body taking by the closed and the open tray impression technique with 3 types of impression tray. Individual tray, metal stock tray and polycarbonate tray were used. Materials and methods: Nine closed tray impressions were taken by individual tray, metal stock tray and polycarbonate stock tray, respectively with polyether impression material. 9 open tray impressions were also acquired by same manner. Precision analysis on the master models was performed by attaching the reference frameworks with alternate single screws and measuring the vertical fit discrepancy of respective analogues in working cast with a stereo microscope. Data were analyzed by 1 way ANOVA and independent t-test. Results: The average fit accuracy of impression bodies was calculated. With the closed tray impression technique, there were significant statistical differences in vertical fit discrepancy according to the types of tray. The individual tray group showed the lowest value and the polycarbonate stock tray group represented the highest. With the open tray impression technique, there was no significant difference in vertical fit discrepancy. Significant statistical difference in vertical fit discrepancy was found between the open and the closed impression technique with the polycarbonate stock tray. Conclusion: From the results above, more precise impressions could be acquired by the rigid individual tray compared with the polycarbonate stock tray. It was hard to get consistent accuracy impressions by the closed tray impression technique with polycarbonate stock trays.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.325-335
• /
• 2008

The junction between resilient denture liner and the denture base is difficult to finish and polish due to difference of the physical property of the materials. Gaps tend to be formed during finishing and polishing procedures. The purpose of this study was measuring the width of junctional gap between $Molloplast-B^{(R)}$ and denture base material after finishing and polishing procedure, and evaluating the effect of method and direction on gap width. $Molloplast-B^{(R)}$ was processed (according to the manufacturer's instruction) against Lucitone $199^{(R)}$ acrylic resin. 50 specimens were fabricated with a raised center section. All of specimens were examined and photographed with a stereoscopic microscope(x120), and the largest gap along the junction of $Molloplast-B^{(R)}$ and acrylic resin on each specimen was measured. One-way analysis of variance(ANOVA) and independent t-test at 95% confidence level were used to analyze the data and to compare groups. The results of this study were as follows. In comparison with finishing tools, the gap width was the largest in $Molloplast^{(R)}$-Cutter and the smallest in FSQ-cross cut bur. There was statistically significant difference between FSQ-cross cut bur and $Molloplast^{(R)}$-Cutter(p<0.05). There was no significant difference in gap width between the direction of polishing. The mean value of gap width was the smallest in case of no polishing, and the largest in case of polishing with pumice & tin oxide. There was statistically significant difference between pumice and pumice & tin oxide. From the results, it is concluded that the use of $Molloplast^{(R)}$-Cutter in clinic need serious consideration even though it has good cutting ability. Further careful study is needed for finishing and polishing methods for decreasing gap width in junction of two materials.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.61-62
• /
• 2003

Clonal propagation of high-value forest trees through somatic embryogenesis (SE) has the potential to rapidly capture the benefits of breeding or genetic engineering programs and to improve raw material uniformity and quality. A major barrier to the commercialization of this technology is the low quality of the resulting embryos. Several factors limit commercialization of SE for Corsican pine, including low initiation rates, low culture survival, culture decline causing low or no embryo production, and inability of somatic embryos to fully mature, resulting in low germination and reduced vigour of somatic seedlings. The objective was to develop a Corsican pine maturation medium that would produce cotyledonary embryos capable of germination. Treatments were arranged in a completely randomized design. Data were analyzed by analysis of variance, and significant differences between treatments determined by multiple range test at P=0.05. Corsican pine (Pinus nigra var. maritima) cultures were initiated on modified !P6 medium. Modifications of the same media were used for culture multiplication and maintenance. Embryogenic cultures were maintained on the same medium semi solidified with 2.5 g/l Gelrite. A maturation medium, capable of promoting the development of Corsican pine somatic embryos that can germinate, is a combination of iP6 modified salts, 2% maltose, 13% polyethylene glycol (PEG), 5 mg!l abscisic acid (ABA), and 2.5 g/l Gelrite. After initiation and once enough tissue developed they were grown in liquid medium. Embryogenic cell suspensions were established by adding 0.951.05 g of 10- to 14-day-old semisolid-grown embryogenic tissue to 9 ml of liquid maintenance media in a 250ml Erlenmeyer flask. Cultures were then incubated in the dark at 2022$^{\circ}$C and rotated at 120 rpm. After 2.53 months on maturation medium, somatic embryos were selected that exhibited normal embryo shape. Ten embryos were placed horizontally on 20 ml of either germination medium ($\frac{2}{1}$strength Murashige and Skoog (1962) salts with 2.5 g/l activated charcoal) or same medium with copper sulphate adjusted to 0.25 mg/1 to compensate for copper adsorption by activated carbon. 2% and 4% maltose was substituted by 7.5% and 13% PEG respectively to improve the yield of the embryos. Substitution of' maltose with PEG was clearly beneficial to embryo development. When 2% of the maltose was replaced with 7.5% PEG, many embryos developed to large bullet-shaped embryos. At latter stages of development most embryos callused and stopped development. A few short, barrel-shaped cotyledonary embryos formed that were covered by callus on the sides and base. When 4% of the maltose was removed and substituted with 13% PEG, the embryos developed further, emerging from the callus and increasing yield slightly. Microscopic examination of the cultures showed differing morphologies, varying from mostly single cells or clumps to well-formed somatic embryos that resembled early zygotic embryos only liquid cultures with organized early-stag. A procedure for converting and acclimating germinants to growth in soil and greenhouse conditions is also tested. Seedling conversion and growth were highly related to the quality of the germinant at the time of planting. Germinants with larger shoots, longer, straighter hypocotyls and longer roots performed best. When mature zygotic embryos germinate the root emerges, before or coincident with the shoot. In contrast, somatic embryos germinate in reverse sequence, with the cotyledons greening first, then shoot emergence and then, much later, if at all, the appearance of the root. Somatic seedlings, produced from the maturation medium, showed 100% survival when planted in a field setting. Somatic seedlings showed normal yearly growth relative to standard seedlings from natural seed.

• KDI Journal of Economic Policy
• /
• v.12 no.2
• /
• pp.51-79
• /
• 1990

Research on technical efficiency, an important dimension of market performance, had received little attention until recently by most industrial organization empiricists, the reason being that traditional microeconomic theory simply assumed away any form of inefficiency in production. Recently, however, an increasing number of research efforts have been conducted to answer questions such as: To what extent do technical ineffciencies exist in the production activities of firms and plants? What are the factors accounting for the level of inefficiency found and those explaining the interindustry difference in technical inefficiency? Are there any significant international differences in the levels of technical efficiency and, if so, how can we reconcile these results with the observed pattern of international trade, etc? As the first in a series of studies on the technical efficiency of Korea's manufacturing industries, this paper attempts to answer some of these questions. Since the estimation of technical efficiency requires the use of plant-level data for each of the five-digit KSIC industries available from the Census of Manufactures, one may consture the findings of this paper as empirical evidence of technical efficiency in Korea's manufacturing industries at the most disaggregated level. We start by clarifying the relationship among the various concepts of efficiency-allocative effciency, factor-price efficiency, technical efficiency, Leibenstein's X-efficiency, and scale efficiency. It then becomes clear that unless certain ceteris paribus assumptions are satisfied, our estimates of technical inefficiency are in fact related to factor price inefficiency as well. The empirical model employed is, what is called, a stochastic frontier production function which divides the stochastic term into two different components-one with a symmetric distribution for pure white noise and the other for technical inefficiency with an asymmetric distribution. A translog production function is assumed for the functional relationship between inputs and output, and was estimated by the corrected ordinary least squares method. The second and third sample moments of the regression residuals are then used to yield estimates of four different types of measures for technical (in) efficiency. The entire range of manufacturing industries can be divided into two groups, depending on whether or not the distribution of estimated regression residuals allows a successful estimation of technical efficiency. The regression equation employing value added as the dependent variable gives a greater number of "successful" industries than the one using gross output. The correlation among estimates of the different measures of efficiency appears to be high, while the estimates of efficiency based on different regression equations seem almost uncorrelated. Thus, in the subsequent analysis of the determinants of interindustry variations in technical efficiency, the choice of the regression equation in the previous stage will affect the outcome significantly.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.3
• /
• pp.28-37
• /
• 2016

Through the research and analysis on the hydrological environment and soil environment of habitats through documentary and field studies over 14 habitats of Euryale ferox Salisb. within Jeollabukdo, with the objective of acquiring the basic data for forming an environment based on plantation of reservoirs that are composed with Euryale ferox, the following results were obtained. As a result of analyzing the construction period of the habitats of Euryale ferox from a total of 14 places, the average period of duration after construction of all subject reservoirs appeared to be 71.8 years. Moreover, when examining the relationship between the age of reservoirs and eutrophication, it could be judged that at least the eutrophication of subsoil and water environment is not an obstacle to the growth of Euryale ferox grows in habitats that have a reservoir age of approximately 70 years or more. As a result of analyzing the gardening of soil sediment of the Euryale ferox habitats, the component ingredients appeared to be composed of 80.2% of clay, 16.7% of silt and 3.1% of sand, and the soil class pursuant to such was classified as 'heavy clay'. The organic matter contents of soil sediment appeared to be an average of 36g/kg, and there appeared to be no noticeable difference between the habitats and non-habitats of Euryale ferox. The water quality environment of Euryale ferox habitat appeared to be pH 6.5~7.9, concentration of dissolved oxygen to be $1.8{\sim}8.8mg/{\ell}$, concentration of COD to be $6.8{\sim}74mg/{\ell}$, floating materials to be $2.0{\sim}213mg/{\ell}$, total nitrogen to be $0.422{\sim}10.723mg/{\ell}$, and phosphate to be $0.003{\sim}0.126mg/{\ell}$. The average DO concentration of Aedang Reservoir at Jeongeup, Daejeong Reservoir at Imsil, and Myeongdeokji at Gimje with high vitality and green coverage ratio of Euryale ferox appeared to be $3.5mg/{\ell}$, total nitrogen to be $1.33mg/{\ell}$, and concentration of phosphorus-phosphate to be $0.061mg/{\ell}$. When comparing such with the entire average value, the DO and total nitrogen concentration appeared to be rather low, and the phosphorus-phosphate concentration appeared to be higher by two times or more, thus, an in-depth study on the correlation of the vitality of Euryale ferox Salisb. and concentration of phosphorate-phosphorus will be needed in the future.

• Journal of Science Education
• /
• v.33 no.1
• /
• pp.12-30
• /
• 2009

The purpose of this study was to analyze recognition characteristics of science gifted students on the earth system based on their thinking style. The subjects were 24 science gifted students at the Science Institute for Gifted Students of a university located in metropolitan city in Korea. The students' thinking styles were firstly examined on the basis of the Sternberg's theory of mental self-government. And then, the students were divided into two groups: Type I group(legislative, judicial, global, liberal) and Type II group(executive, local, conservative) based on Sternberg's theory. Data was collected from three different type of questionnaires(A, B, C types), interview, word association method, drawing analyses, concept map, hidden dimension inventory, and in-depth interviews. The findings of analysis indicated that their thinking styles were characterized by 'Legislative', 'Executive', 'Anarchic', 'Global', 'External', 'Liberal' styles. Their preference were conducting new projects and using creative problem solving processes. The results of students' recognition characteristics on earth system were as follows: First, though the two groups' quantitative value on 'System Understanding' was very similar, there were considerable distinctions in details. Second, 'Understanding the Relationship in the System' was closely connected to thinking styles. Type I group was more advantageous with multiple, dynamic, and recursive approach. Third, in the relation to 'System Generalization' both of the groups had similar simple interpretational ability of the system, but Type I group was better on generalization when 'hidden dimension inventory' factor was added. On the system prediction factor, however, students' ability was weak regardless of the type. Consequently, more specific development strategies on various objects are needed for the development and application of the system learning program. Furthermore, it is expected that this study could be practically and effectively used on various fields related to system recognition.

• Journal of the Korean association of regional geographers
• /
• v.7 no.3
• /
• pp.107-120
• /
• 2001

This study is concerned with providing a reliable procedure of calibrating a set of places specific distance parameters and with applying it to U.S. inter-State migration flows between 1985 and 1900. It attempts to conform to recent advances in quantitative geography that are characterized by an integration of ESDA(exploratory spatial data analysis) and local statistics. ESDA aims to detect the spatial clustering and heterogeneity by visualizing and exploring spatial patterns. A local statistic is defined as a statistically processed value given to each location as opposed to a global statistic that only captures an average trend across a whole study region. Whereas a global distance parameter estimates an averaged level of the friction of distance, place-specific distance parameters calibrate spatially varying effects of distance. It is presented that a poisson regression with an adequately specified design matrix yields a set of either origin-or destination-specific distance parameters. A case study demonstrates that the proposed model is a reliable device of measuring a spatial dimension of migration, and that place-specific distance parameters are spatially heterogeneous as well as spatially clustered.