• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.783-788
• /
• 2011

Most management systems that are currently in place to monitor the safety of bridges - working in conjunction with a wireless sensor network - are based on a wired infrastructure. Not only do these wired systems expensive to install, but they are expensive to replace or repair should a problem occur with the system while in operation. In an effort to address these problems, there have been many researches that attempted to use a wireless sensor network for the existing wired measurement system. However, they have been met with difficulty due to the problems of power and synchronization in actually bringing the management system to the bridges as a commercial system. This paper proposes a bridge management system based on WSN (Wireless Sensor Network) which uses wireless LAN technology. The system was tested using a testbed and when the obtained data were compared to the data collected using the existing wired counterpart it was found that they were almost the same.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.9-15
• /
• 2006

In this paper, signal processing techniques for noncoherent impulse-radio-based UWB (IR-UWB) communication system are proposed to provide system implementation of low power consumption and low complexity. The proposed system adopts a simple modulation technique of OOK (on-oft-keying) and noncoherent signal detection based on signal amplitude. In particular, a technique of a novel high speed digital sampler using a stable, lower reference clock is developed to detect nano-second pulses and recover digital signals from the pulses. Also, a 32 bits Turyn code for data frame synchronization and a convolution code as FEC are applied, respectively. To verify the proposed signal processing techniques for low power, low complexity noncoherent IR-UWB system, the proposed signal processing technique is implemented in FPGA and then a short-range communication system for wireless transmission of high quality MP3 data is designed and tested.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.6
• /
• pp.745-752
• /
• 2018

ICs(Integrated circuits) for nuclear power plant exposed to radiation environment occur malfunctions and data errors by the TID(Total ionizing dose) effects among radiation-damage phenomenons. In order to protect ICs from the TID effects, this paper proposes a radiation-hardening of the logic circuit(D-latch) which used for the data synchronization and the clock division in the ICs design. The radiation-hardening technology in the logic device(NAND) that constitutes the proposed RH(Radiation-hardened) D-latch is structurally more advantageous than the conventional technologies in that it keeps the device characteristics of the commercial process. Because of this, the unit cell based design of the RH logic device is possible, which makes it easier to design RH ICs, including digital logic circuits, and reduce the time and cost required in RH circuit design. In this paper, we design and modeling the structure of RH D-latch based on commercial $0.35{\mu}m$ CMOS process using Silvaco's TCAD 3D tool. As a result of verifying the radiation characteristics by applying the radiation-damage M&S (Modeling&Simulation) technique, we have confirmed the radiation-damage of the standard D-latch and the RH performance of the proposed D-latch by the TID effects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.206-212
• /
• 2006

Many image and video compression algorithms work by splitting the input image into blocks and producing variable-length coded bits for each block data. If variable-length coded data are transmitted consecutively, then the resulting coder is highly sensitive to channel errors. Therefore, most image and video techniques for providing some protection to the stream against channel errors usually involve adding a controlled amount of redundancy back into the stream. Such redundancy might take the form of resynchronization markers, which enable the decoder to restart the decoding process from the known state, in the event of transmission errors. The Error Resilient Entropy Code (EREC) is a well known method which can regain synchronization without any redundant information to convert from variable-length code to fixed-length code. This paper proposes an enhancement to EREC, which greatly improves its transmission ability for the compressed image quality without any redundant bits in the event of errors. The simulation result shows that the both objective and subjective quality of transmitted image is enhanced compared with the existing EREC at the same BER(Bit Error Rate).

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.12
• /
• pp.439-446
• /
• 2016

In this paper, an efficient prediction accuracy enhancement strategy is proposed for improving the performance of the prediction-based parallel event-driven gate-level timing simulation. The proposed new strategy adopts the static double prediction and the dynamic prediction for input and output values of local simulations. The double prediction utilizes another static prediction data for the secondary prediction once the first prediction fails, and the dynamic prediction tries to use the on-going simulation result accumulated dynamically during the actual parallel simulation execution as prediction data. Therefore, the communication overhead and synchronization overhead, which are the main bottleneck of parallel simulation, are maximally reduced. Throughout the proposed two prediction enhancement techniques, we have observed about 5x simulation performance improvement over the commercial parallel multi-core simulation for six test designs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.592-599
• /
• 2007

The advancement of wireless technology improves the electronic learning by combining with the mobile function, and promotes the expanded transition to the mobile learning. Basically, the mobile learning provides the usefulness in terms of tile and space to provide learners with the access to the educational contents. However, the small display device and limited memory space of mobile device is limiting the access to the learning contents simply to the text-based transmission. This paper designed and implemented the multimedia mobile learning system that reduces the size of parser by define into MSMIL composed only of needed tag to multimedia contents production in the mobile devices by using the SMIL that supports the multimedia object synchronization reduces the data of multimedia learning data and enhances the transmission efficiency by applying the macro method in creating the contents of learning. The results of implementation indicates that it simplifies the designing language, makes the language learning easy, and saves the CPU resources for the parsing by reducing the size of parser.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.279-286
• /
• 2021

Recently, the effort of enterprises are visualized to correspond for 4th industrial revolution and climate change. Reaching the operation of industrial facilities are one of these efforts and is actively progressing under identical condition between real and virtual world through introduction of cyber-physical system (CPS). However, the problem on no unified definition for CPS still exists. Thus, in this paper, we review the previous concept of CPS. We propose new concept of CPS with four sections such as real world section, communication section, virtual world section and management section. We also propose definite concept by classifying the layer of each section. In order to confirm the possibility of application for proposed concept of CPS, we applied simple motor. We compare the result for torque between real motor and virtual motor. Finally we confirm that the applicability of proposed concept of CPS is very high.

• KNOM Review
• /
• v.21 no.2
• /
• pp.35-45
• /
• 2018

As Network Slicing functionality gets applied to mobile networking, a mechanism that enables the selection of network slices becomes indispensable. Following the 3GPP Technical Specification for the 5G Architecture, the inclusion of the Network Slice Selection Function (NSSF) in order to leverage the process of slice selection is apparent. However, actual implementation of this network function needs to deal with the dynamic changes of network instances, due to this, a platform that supports the orchestration of Virtual Network Functions (VNF) is required. Our proposed solution include the use of the Central Office Rearchitected as a Data Center (CORD) platform, with the specified profile for mobile networks (M-CORD) that integrates a service orchestrator (XOS) alongside solutions oriented to Software Defined Networking (SDN), Network Function Virtualization (VNF) and virtual machine management through OpenStack, in order to provide the right ecosystem where our implementation of NSSF can obtain slice information dynamically by relying on synchronization between back-end services and network function instances.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2022

Recently, IoT sensors are often used to produce stream data locally and they are provided for edge computing applications. Mass-produced data are stored in the mobile device's database for real-time processing and then synchronized with the server when needed. Many mobile databases are developed to support those applications. They are CloudScape, DB2 Everyplace, ASA, PointBase Mobile, etc, and the most widely used database is SQLite3 on Linux. In this paper, we focused on the performance required for synchronization with the server. The search performance required to retrieve SQLite3 was compared and analyzed according to the type of each Linux file system in which the database is stored. Thus, performance differences were checked for each file system according to various search query types, and criteria for applying the more appropriate Linux file system according to the index use environment and table scan environment were prepared and presented.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.763-769
• /
• 2023

Flight control computers for unmanned aerial vehicles are avionics that require high reliability and are generally designed to be multiplexed for margins on failures. The multiplexed flight control computer should include an interface through discrete signals and CCDL for synchronization and fault separation between channels. With the development of unmanned aerial vehicle technology, various types of platforms such as AAM and LPI are being developed in the private and military, which require advanced control performance for high-performance flight control and SWaP optimization of onboard equipment. In this paper, we designed a optimized flight control computer architecture for unmanned aerial vehicles for multiplexing processing and performed a software design for input and output control. In addition, input/output processing performance was evaluated through the implemented flight control computer and input/output software.