• ETRI Journal
• /
• v.9 no.4
• /
• pp.26-35
• /
• 1987

Switching system can be regarded as the key node of Integrated Services Digital Networks(ISDN) because it plays the Important role in realization of ISDN. As ISDN is evolved from the telephony Integrated Digital Network(IDN), the switching system for ISDN will be evolved from the function and structure of telephony digital switching system. At near future, ISDN switching system is expected to implement the integrated access and transparent switching functions for both voice and data. As final goals of switching system, advanced switching methods for information having various traffic characteristics such as voice, data, text and image should be considered. This paper considered. This paper will show some of the fundamental design challenges and architectural trends in ISDN switching system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.139-146
• /
• 2002

The third generation mobile communication needs to provide multimedia service with increased data rates. Thus an efficient allocation of radio and network resources is very important. This paper models the 'burst switching' as an efficient radio resource allocation scheme and the performance is compared to the circuit and packet switching. In burst switching, radio resource is allocated to a call for the duration of data bursts rather than an entire session or a single packet as in the case of circuit and packet switching. After a stream of data burst, if a packet does not arrive during timer2 value ($\tau_{2}$), the channel of physical layer is released and the call stays in suspended state. Again if a packet does not arrive for timerl value ($\tau_{1}$) in the suspended state, the upper layer is also released. Thus the two timer values to minimize the sum of access delay and queuing delay need to be determined. In this paper, we focus on the decision of $\tau_{2}$ which minimizes the access and queueing delay with the assumption that traffic arrivals follow Poison process. The simulation, however, is performed with Pareto distribution which well describes the bursty traffic. The computational results show that the delay and the packet loss probability by the burst switching is dramatically reduced compared to the packet switching.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.113-118
• /
• 1986

Nowdays switching software designs are based on the concept of maximizing efficiency. This idea is to put through the most call, in the fastest time, using the fewest possible resources. So the memory usages are embossed one of the most important part to be considered in the switching software. This paper discusses the general concepts of switching software at first, then describes the switching data base from the view point of the access time, memory efficiency, and call processing environment.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.269-272
• /
• 1998

The disks containing all the system software-OS(Operating System), application program, and DB(Data Base)-happen to be broken. This happens not only to general computer systems but also to electronic switching system. In the electronic switching system, this causes the essential data and software needed for operating the system to be damaged and is fatal to services, so that they should be recovered as soon as possible. Especially the data, having the information of subscriber, trunk, prefix, and system configuration should be receovered preferentially. To manage this situation, the system should let the operator know that the data are damaged and recover the damaged data. This paper shows a way of recovering this damaged data, the object data of audit, the structure of DBMS and the implementation of audit in the case of the domestic high capacity electronic switching system, TDX-10A.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.2
• /
• pp.609-617
• /
• 2006

A new fuzzy c-regression algorithm for switching regression analysis is presented, which combines fuzzy c-means clustering and least squares support vector machine. This algorithm can detect outliers in switching regression models while yielding the simultaneous estimates of the associated parameters together with a fuzzy c-partitions of data. It can be employed for the model-free nonlinear regression which does not assume the underlying form of the regression function. We illustrate the new approach with some numerical examples that show how it can be used to fit switching regression models to almost all types of mixed data.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.5
• /
• pp.13-21
• /
• 2020

This paper proposes a sign reversal channel switching method in space-frequency block code for orthogonal frequency division multiplexing system. In case of sending source data on other antenna, it is necessary for the receiver to change combining method according to the channel variation. If one does not know the predefined channel switching sequence, it is not possible to decode the received data precisely. In transmit data symbols' exchanges for a channel switching, data symbols are exchanged according to a format of space-frequency block code. In this paper, we proposes a simple sign reversal method except exchanging data symbols between transmit antennas. It is shown that this method occurs another combining method for a simple encryption in the receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.4
• /
• pp.360-368
• /
• 1989

In this paper, the performance of an integrated voice/data cut-through switching network is studied. We first derive cut-through probabilities of voice and data packets at intermediate nodes. Then, the Laplace transform for the network delay is obtained. According to numerical results, the performance of cut-through switching is superior to that of packet switching for integrated voice/data networks.

• Electronics and Telecommunications Trends
• /
• v.14 no.4 s.58
• /
• pp.1-9
• /
• 1999

In this paper, we summarize the lessons learned from the applications of the software reliability engineering to a large-scale software project. The considered software is the software system of the TDX-10 ISDN switching system. The considered software consists of many components, called functional blocks. These functional blocks serve as the unit of coding and test. The software is continuing to be developed by adding new functional blocks. We are mainly concerned with the analysis of the effects of these software components to software reliability and with the analysis of the reliability evolution. We analyze the static characteristics of the software related to software reliability using failure data collected during system test. We also discussed a pattern which represents a local and global growth of the software reliability as version evolves. To find the pattern of software of the TDX-10 ISDN system, we apply the S-shaped model to a collection of failure data sets of each evolutionary version and the Goel-Okumoto (G-O) model to a grouped overall failure data set. We expect this pattern analysis will be helpful to plan and manage necessary human/resources for a new similar software project which is developed under the same developing circumstances by estimating the total software failures with respect to its size and time.

• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.611-620
• /
• 2010

This paper presents a new architecture, called "Power Electronics Remote Wiring and Measurement Laboratory (PermLAB)", that translates a common gateway interface (CGI) string from a remote web user to a web server connected to a 3-dimension switching matrix board, can be used to switch on and off, and to control a cluster of instruments and components. PermLAB addresses real-time connection, switching, and data acquisition over the Internet instead of using simulated data. A software procedure uses a signature system to identify each instrument and component in a complex system. The Web-server application is developed in HTML, JavaScript and Java, and in C language for the CGI interface, which resides in a controller portion of LabVIEW. The LabVIEW software fully integrates the Web sever, LabVIEW data acquisition boards and controllers, and the 3-dimensional switching matrix board. The paper will analyze a half-wave rectifier (AC - DC converter) circuit connected over the Internet using the PermLAB. PermLAB allows students to obtain real data by real-time wiring of real circuits in the laboratory using a "virtual breadboard" on the Web. The software for the Web-based 3-dimensional system is flexible, portable, can be integrated into many laboratory applications or expanded, and easily accessible worldwide.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.6
• /
• pp.59-66
• /
• 2018

Recently, the use of mobile payment, called "Pay" payment, is increasing such as 'KakaoPay' and 'SamsungPay'. In Korea, various mobile payment services are running and emerging. The purpose of this study is to examine the intention to switch from using existing credit cards or check card to mobile payment service based on the two-factor theory. We empirically examined the effect of the two factors, the factors that enable switching and the factors that inhibit switching. Therefore, the study use switching cost and switching benefit as parameters to confirm the effect on the switching intention. In addition, this study intends to analyze the differences between two subgroups by the degree of personal innovativeness. We survey smartphone users and credit card or check card users, and analyzed the Smart PLS 3.0 using structural equation model to verify the significance of the research hypothesis.