• 정보저장시스템학회논문집
• /
• 제2권4호
• /
• pp.224-229
• /
• 2006

There has been studied flow to minimize the spot size to increase data capacity. Optical data storage devices are being developed near practical limits with wavelength and NA of 405nm and 0.85. There has been studied many types of next generation storage devices such as blu-ray multilayer system, probe based data storage and holographic data storage. Among these data storage devices, solid immersion lens(SIL) based near field recording (NFR) has been widely studied. In this system, SIL is the key component that focuses the laser beam with a very small size which enables ultra high data capacity. Therefore, optical performance evaluation system is required for SIL assembly. In this dissertation, a simple and accurate SIL assembly measurement method is proposed with wedge plate lateral shearing interferometer(LSI). Wedge plate LSI is cheaper than commercialized interferometer, robust to the vibration and the moving distance for phase shifting is large that is order of micrometer. We designed the thickness, wedge angle, material, surface quality and wavelength of wedge plate as 1mm, 0.02degree, fused silica, lamda/10(10-5) and 405nm, respectively. Also, we confirmed simulation and experimental results with quantitative analysis. This simple wedge plate LSI can be applied to different types of SIL such as solid immersion mirror(SIM), hemispherical, super-hemispherical and elliptical SIL.

• 정보저장시스템학회논문집
• /
• 제3권1호
• /
• pp.13-16
• /
• 2007

The purpose of this paper is real time tilt servo control of the holographic data storage system. Holographic data storage device is a next generation data storage device with high storage density, high transfer rate and short access time. This device is very sensitive to a disturbance due to the enormous storage density. As to the recording material changed disc type, the media continuously vibrates as the disc rotates. When disc rotates, deviation, eccentricity and unbalance disturbance are occurred. This disturbances cause disc tilt, finally reference beam does not illuminates to correct incidence angle. Therefore real time tilt servo control is essential. In this paper, the algorithm is proposed to make real time tilt detection in angle multiplexing of the holographic data storage system with an additional servo beam and the experiments are performed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.445-450
• /
• 2001

DVD(Digital Versatile Disk) is the data storage media devised to make high storage density and high data input/output possible. Therefore higher rotational speed and better accuracy in optical pick-up are required compared with the existing optical storage device. These operational functional requirements are concerned with abilities of optical storage device. Especially, High rotational speed is deeply concerned with the noise and vibration of optical storage device, is important problem in development of optical storage device so much. This paper propose a new concept ROM media of optical storage device named as Cylindrical ROM media, and evaluate this by means of Axiomatic approach and empirical data.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제6권1호
• /
• pp.21-35
• /
• 2000

MIDAS-II는 한국전자통신연구원에서 개발한 바다 DBMS의 저장 시스템이다. 본 논문에서는, MIDAS-II가 대용량 멀티미디어 데이타 서버의 저장 시스템으로 기능하도록 광 디스크 쥬크박스 또는 테이프 라이브러리와 같은 3차 저장 장치를 효율적으로 장착하기 위한 확장에 대하여 기술하였다. 복수개의 저장 매체(platter, 예를 들어 디스크 또는 카트리지 테이프)로 구성된 3차 저장 장치용 볼륨 구조를 위하여 기존 MIDAS-II 디스크 볼륨 구조를 확장하여 3차 저장 장치 볼륨의 용량을 Tera 바이트급으로 확대하였다. 그리고 3차 저장 장치에 저장된 LOB(Large Object) 데이타를 효율적으로 처리하기 위하여 기존 MIDAS-II LOB 구조를 확장하였다. 또한 MIDAS-II 공유 메모리 구조, 프로세스 구조, 유틸리티 등을 확장하였고, 기존 응용 프로그램 운용에 변화를 주지 않기 위하여 MIDAS-II API 함수들의 프로토 타입을 그대로 유지한 채 그 내부 기능만 확장하였다. 또한 3차 저장 장치로부터의 데이타 검색 성능을 평가하여 본 논문의 3차 저장 장치 장착을 위한 MIDAS-II 확장의 적정성을 확인하였다. 이상의 확장 및 성능 평가는 모두 SunOS 5.4 환경에서 수행되었다.

• 한국통신학회논문지
• /
• 제29권4B호
• /
• pp.403-410
• /
• 2004

일반적으로 교환 시스템은 프로세서 보드, 입출력처리 보드 및 데이터 저장 장치등 그 기능별로 다수의 서브시스템들로 구성되어 있다. 또한 신뢰성을 확보하기 위하여 모든 서브 보드들은 이중화로 되어 있다. 교환시스템에서 저장 장치에는 시스템에 관련된 정보나 과금 정보등과 같은 작업 관련 데이터를 저장하며 비 휘발성 메모리에 저장해야 한다. 일반적으로 비 휘발성 저장장치를 구현할 때는 플래시메모리(flash memory) 또는 배터리 백업 메모리(battery backup memory)를 사용한다. 그러나 메모리는 단위 용량당 가격이 높고 백업(backup) 하지 않은 데이터를 손실했을 때 복구할 수 없다. 본 논문에서는 마이크로 컨트롤러를 이용하여 단위 용량당 가격이 저렴하고, 대용량의 데이터를 저장함과 동시에 이중화를 만족시키는 on-board 형태의 소형 디스크 모듈을 설계 구현하였다. 본 논문에서 구현된 이중화 저장장치는 사용 중인 엑티브(active) 디스크에 결함이 생겨 사용할 수 없을 경우에 리빌딩(rebuilding)과정을 동해 스탠바이 모듈로부터 데이터를 복구하며, 리빌딩 중에도 호스트 시스템은 스탠바이 디스크모듈을 이용하여 지속적으로 서비스를 제공할 수 있도록 설계되었다. 본 연구에서 개발된 저장장치는 교환시스템에서 플래시 메모리와 같은 값비싼 저장 장치를 대체 할 수 있을 것으로 기대된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.263-266
• /
• 2000

In this paper we develop a dual storage device to store a lot of data safely and reliably in communication system. The device consists of micro-controller, FPGA and hard disk. It provides many functions those are rebuilding, automatic remapping, host service and remote host service. The developed device can be used instead of expensive storage device like flash memory in various communication systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1099-1102
• /
• 2005

In this paper, a new visual servo method, which uses 5 axis picomotor to compensate the misalignment generated between a SLM and a CCD in a holographic storage device, was proposed and the effectiveness of it was proved by the experiment. In a holographic storage device, the data processing is done by the SLM and the CCD, and the shape of data is 2 dimensional binary patterns. Therefore, the exact image matching between the SLM and the CCD is very important, and the mismatching of it causes the errors in the data reconstruction. First, the brief introduction of a holographic data storage is given, then, BER concept which is errors caused by pixel mismatch between the SLM and the CCD is defined. Second, the geometric relation between 5 axis picomotor and the CCD movement is studied. Finally, the visual servo method using 5 axis picomotor to reduce the BER in a holographic storage device is proposed and experimented. From the experiment, we find that about 3% BER improvement is obtained by the proposed method.

• 한국산업정보학회논문지
• /
• 제15권4호
• /
• pp.39-45
• /
• 2010

휴대용 저장장치의 기술 발달로 저장장치의 대용량화가 가속화 되고 많은 데이터들의 이동 및 보관이 편리해 졌다. 휴대용 저장장치로는 USB 저장장치가 보편화 되어 사용되고 있으며, 포렌식 측면에서 이러한 USB 저장장치의 사용흔적 확보는 휴대용 저장장치를 통한 중요데이터 유출에 관한 조사를 가능하게 한다. 부트영역에 남아있는 USB 저장장치의 사용흔적을 확보하게 된다면 데이터 유출 및 범죄 행위 입증에 관한 조사가 가능하게 된다. 본 논문에서는 Disk Signature의 분석을 통한 USB Key/Thumb drive, USB Drive Enclosure 사용여부의 확인과 구분방법을 제시한다.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.377-382
• /
• 2010

With the advent of flash memory based new storage device (SSD), there is considerable interest within the computer industry in using flash memory based storage devices for many different types of application. The dynamic index structure of large text collections has been a primary issue in the Information Retrieval Applications among them. Previous studies have proven the three approaches to be effective: In- Place, merge-based index structure and a combination of both. The above-mentioned strategies have been researched with the traditional storage device (HDD) which has a constraint on how keep the contiguity of dynamic data. However, in case of the new storage device, we don' have any constraint contiguity problems due to its low access latency time. But, although the new storage device has superiority such as low access latency and improved I/O throughput speeds, it is still not well suited for traditional dynamic index structures because of the poor random write throughput in practical systems. Therefore, using the experimental performance evaluation of various index maintenance schemes on the new storage device, we propose an efficient index structure for new storage device that improves significantly the index maintenance speed without degradation of query performance.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.46-54
• /
• 2001

Technology of data storage device has developed noticeably as demands and needs of new media increase, Huge data can be conveniently handled using removable type optical disk. In the present paper, the trend and current issue of development for optical disk media are introduced. Standardization of next generation optical disk media, technology of recording and reading, and applications of magneto-optical devices are also discussed. Finally, a methodology of process optimization for design and fabrication of high density optical disk substrate is proposed.