• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.166-171
• /
• 2001

A digital seismic data acquisition and processing system using a PC has been developed in order to replace the analog data acquisition system of shallow marine seismic survey. An A/D converter that has 12bits of resolution and 225KHz of conversion rate was ued to acquire data, and a data acquisition software was developed as a Windows program which provides convenience of use. Raw data acquired at field has been saved to the hard-disk simultaneously. The signal to noise ratio, vertical and horizontal resolution could be improved by a digital data processing of the raw data. The digital processing of the raw data includss gain recovery, filtering, deconvolution, and muting. With the prediction deconvolution algorithm multiple reflections appearing on the shallow marine seismic section could be removed successfully.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.25-34
• /
• 2012

Due to the development of wireless devices such as smart-phone and internet, a lot of linguistic resources actively are opened in each area of expertise. Also, various systems using semantic web technologies are developing for determining whether such information are useful or not. In order to build these systems, the processes of data collection and natural language processing are necessary. But, there is few systems to use of integrating software and data required those processes. In this paper, we propose the system, uLAMP, integrating software and data related to natural language processing. In terms of economics, the cost can be reduced by preventing duplicated implementation and data collection. On the other hand, data and software usability are increasing in terms of management aspects. In addition, for the evaluation of uLAMP usability and effectiveness, user survey was conducted. Through this evaluation, the advantages of the currentness of data and the ease of use are found.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.291-295
• /
• 2006

As GPS equipments improve, one can acquire GPS data easily in the field. However, to obtain precise and accurate coordinates, post processing is additionally required and the processing needs high degree of skills. Besides, it is very common that we can't operate processing software in the field because required system environment is usually not prepared. The aim of this study is the development of internet-based GPS data processing service. For post processing, we use GIPSY developed by JPL. It has many advantages such as precise point positioning, which enables a rapid determination of receiver positions. The developed service in this study proceeds as following orders by interlocking GIPSY and internet service on a Linux platform: Users upload raw data files on the internet, then GIPSY runs automatically and then the user get the result in the field. We use an Apache Web Server as a hosting program and PHP is used in coding web pages.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.509-511
• /
• 2004

This paper outlines the development of image processing system, which will allow the general users in Government and Public organizations easily to use and apply KOMPSAT EOC images in their own business. The system includes an import/export module of EOC image distributed in Hierarchical Data Format (HDF) file and various image processing analysis modules. Especially, the image mosaic and subset functions are designed to use EOC image as an image map, generating the Ortho-image module. To update the various spatial data with EOC image, some essential modules such as change detection by pattern recognition, overlay between images and vector data, and modification of vector data are implemented in the system. The system is developed based on the user request analysis of government agency, and suited for more efficient use of satellite image in public applications. Such system is expected to contribute to practical application of KOMPSAT-2 that will be launched in 2005. Further efforts will be made to accommodate the KOMPSAT -2 MSC data.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.3
• /
• pp.242-250
• /
• 2003

We propose the monitoring system scheme for the CPS/INS integrated navigation system. The design requirements of the monitoring system are suggested and the software scheme based on GUI is proposed. The proposed monitoring system consists of an I/O interface part, a navigation data display part, and a post-processing part. The I/O interface part is responsible for data communication between the monitoring system and a navigation computer unit. The navigation data display part provides various display methods to show the navigation data to user in real-time. The post-processing part collects the navigation data to analyze the performance of navigation system. The proposed monitoring system software was developed using the Visual C++ programming language and a van test was carried out to demonstrate the real-time operation of the monitoring system. The test result shows that the proposed monitoring system can be effectively applied to the CPS/INS integrated navigation system.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2021

The widely used low-cost design methodology for IoT devices is very popular. In such a networked device, memory is composed of flash memory, SRAM, DRAM, etc., and because it processes a large amount of data, memory design is an important factor for system performance. Therefore, each device selects optimized design factors such as function, performance and cost according to market demand. The design of a memory architecture available for low-cost IoT devices is very limited with the configuration of SRAM, flash memory, and DRAM. In order to process as much data as possible in the same space, an architecture that supports parallel processing units is usually provided. Such parallel architecture is a design method that provides high performance at low cost. However, it needs precise software techniques for instruction and data mapping on the parallel architecture. This paper proposes an instruction/data mapping method to support optimized parallel processing performance. The proposed method optimizes system performance by actively using hardware and software parallelism.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.280-288
• /
• 2009

In this paper, we developed new time information recording module of VSI (VLBI Standard Interface) format by analyzing the Mark5B recorder control and operation software with 1Gbps speed, which is able to record the weak signal of space radio source, through the Korean VLBI Network (KVN). The control and operation software of high-speed recorder consists of 2 kinds of software, which is that it can operate RAID control board by controlling large capacity HDD drive and the network control and operation. Especially, core software in high-speed recorder is able to output the results after performing and analyzing the input command. Through the analysis of control and operation software, new time information recording module, which is needed to process the observed data for correlation, is developed. New developed time information recording module can record the time information together after checking the interrupt of 1PPS(Pulse Per Second) input signal when the observed data will be recorded. To verify the normal operation of the developed time information recording module, we performed the real observation test and confirmed the effectiveness of developed software through analyzing the recorded observation data.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.364-367
• /
• 2004

This paper presents the flight software of KoDSat (KSLV-l Demonstration Satellite) which performs demonstrating the KSLV-l (Korea Space Launch Vehicle-l)'s satellite launch capability. The KoDSat Flight Software executes in a single-processor, multi-function flight computer on the spacecraft, the OBC (On Board Computer). The flight software running on the single processor is responsible for all real-time processing associated with: processor startup and hardware initialization, task scheduling, RS422 handling function, command and data handling including uplink command and down-link telemetry, attitude determination and control, battery state of charge monitoring and control, thermal control processing.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.852-861
• /
• 2000

Software reliability growth models are used in testing stages of software development to model the error content and time intervals betwewn software failures. In this paper, using priors for the number of fault with the negative binomial distribution nd the error rate with gamma distribution, Bayesian inference and model selection method for Jelinski-Moranda and Goel-Okumoto and Schick-Wolverton models in software reliability. For model selection, we explored the sum of the relative error, Braun statistic and median variation. In Bayesian computation process, we could avoid the multiple integration by the use of Gibbs sampling, which is a kind of Markov Chain Monte Carolo method to compute the posterior distribution. Using simulated data, Bayesian inference and model selection is studied.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.1
• /
• pp.80-87
• /
• 2001

This article shows how general software-ergonomic principles are successfully applied in the design of user friendly graphical interfaces. A theoretical model(WOB-Model) is derived from empirical studies and validated in the development of several systems. It provides basic principles within a well-balanced framework and leads to concrete design guidelines. The user tests with the software shows that many of the common usability problems can be eliminated.