• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.26-31
• /
• 2009

A new LFSR based test compression scheme is proposed by reducing the maximum number of specified bits in the test cube set, smax, virtually. The performance of a conventional LFSR reseeding scheme highly depends on smax. In this paper, by using different clock frequencies between an LFSR and scan chains, and grouping the scan cells, we could reduce smax virtually. H the clock frequency which is slower than the clock frequency for the scan chain by n times is used for LFSR, successive n scan cells are filled with the same data; such that the number of specified bits can be reduced with an efficient grouping of scan cells. Since the efficiency of the proposed scheme depends on the grouping mechanism, a new graph-based scan cell grouping heuristic has been proposed. The simulation results on the largest ISCAS 89 benchmark circuit show that the proposed scheme requires less memory storage with significantly smaller area overhead compared to the previous test compression schemes.

• Geophysics and Geophysical Exploration
• /
• v.7 no.3
• /
• pp.207-212
• /
• 2004

This article reviews recent developments in three-dimensional (3-D) magntotelluric (MT) imaging. The inversion of MT data is fundamentally ill-posed, and therefore the resultant solution is non-unique. A regularizing scheme must be involved to reduce the non-uniqueness while retaining certain a priori information in the solution. The standard approach to nonlinear inversion in geophysis has been the Gauss-Newton method, which solves a sequence of linearized inverse problems. When running to convergence, the algorithm minimizes an objective function over the space of models and in the sense produces an optimal solution of the inverse problem. The general usefulness of iterative, linearized inversion algorithms, however is greatly limited in 3-D MT applications by the requirement of computing the Jacobian(partial derivative, sensitivity) matrix of the forward problem. The difficulty may be relaxed using conjugate gradients(CG) methods. A linear CG technique is used to solve each step of Gauss-Newton iterations incompletely, while the method of nonlinear CG is applied directly to the minimization of the objective function. These CG techniques replace computation of jacobian matrix and solution of a large linear system with computations equivalent to only three forward problems per inversion iteration. Consequently, the algorithms are efficient in computational speed and memory requirement, making 3-D inversion feasible.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.3
• /
• pp.265-274
• /
• 1990

The temperature inversions were studied on the basis of Digital Memory Bathythermography(DBT) data collected by training ship, Pusan 402, of the National Fisheries University of Pusan in August 23~25, 1986 and Fisheries Reserach and Development Agency of Korea in August, 1986, The results were as follows; Among the 67 stations of studied area, occurrence frequency of temperature inversion was 58.20%, And the frequency of onefold occurrence of temperature inversion at its profile of each station was 13.42%. of twofold occurrence was 20.80%, and of threefold occurrence was 23.88%. In the studied area, the temperature inversion usually occurred below the 40m depth and its layers also located below the thermocline. The temperature range of its inversion was from 14$^{\circ}C$ to 16$^{\circ}C$. The temperature inversion in the study area was oaused by the interaction between Tsushima Warm Current and Korea Coastal Waters.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.34.2-35
• /
• 2018

Galaxy transition from star-forming to quiescent, accompanied with morphology transformation, is one of the key unresolved issues in extragalactic astronomy. Although several environmental mechanisms have been proposed, a deeper understanding of the impact of environment on galaxy transition still requires much exploration. My Ph.D. thesis focuses on which environmental mechanisms are primarily responsible for galaxy transition in different environments and looks at what happens during the transition phase using multi-wavelength photometric/spectroscopic data, from UV to mid-infrared (MIR), derived from several large surveys (GALEX, SDSS, and WISE) and our GMOS-North IFU observations. Our multi-wavelength approach provides new insights into the *late* stages of galaxy transition with a definition of the MIR green valley different from the optical green valley. I will present highlights from three areas in my thesis. First, through an in-depth study of environmental dependence of various properties of galaxies in a nearby supercluster A2199 (Lee et al. 2015), we found that the star formation of galaxies is quenched before the galaxies enter the MIR green valley, which is driven mainly by strangulation. Then, the morphological transformation from late- to early-type galaxies occurs in the MIR green valley. The main environmental mechanisms for the morphological transformation are galaxy-galaxy mergers and interactions that are likely to happen in high-density regions such as galaxy groups/clusters. After the transformation, early-type MIR green valley galaxies keep the memory of their last star formation for several Gyr until they move on to the next stage for completely quiescent galaxies. Second, compact groups (CGs) of galaxies are the most favorable environments for galaxy interactions. We studied MIR properties of galaxies in CGs and their environmental dependence (Lee et al. 2017), using a sample of 670 CGs identified using a friends-of-friends algorithms. We found that MIR [3.4]-[12] colors of CG galaxies are, on average, bluer than those of cluster galaxies. As CGs are located in denser regions, they tend to have larger early-type galaxy fractions and bluer MIR color galaxies. These trends can also be seen for neighboring galaxies around CGs. However, CG members always have larger early-type fractions and bluer MIR colors than their neighboring galaxies. These results suggest that galaxy evolution is faster in CGs than in other environments and that CGs are likely to be the best place for pre-processing. Third, post-starburst galaxies (PSBs) are an ideal laboratory to investigate the details of the transition phase. Their spectra reveal a phase of vigorous star formation activity, which is abruptly ended within the last 1 Gyr. Numerical simulations predict that the starburst, and thus the current A-type stellar population, should be localized within the galaxy's center (< kpc). Yet our GMOS IFU observations show otherwise; all five PSBs in our sample have Hdelta absorption line profiles that extend well beyond the central kpc. Most interestingly, we found a negative correlation between the Hdelta gradient slopes and the fractions of the stellar mass produced during the starburst, suggesting that stronger starbursts are more centrally-concentrated. I will discuss the results in relation with the origin of PSBs.

• International Journal of Advanced Culture Technology
• /
• v.5 no.3
• /
• pp.11-23
• /
• 2017

Anatomy is one of the basic subjects of the nursing course, which is included in the curriculum of the nursing. Anatomy is a basic course for understanding major in nursing and it is the first gateway to acquire expertise. It is mainly opened in nursing and first to second grades. Therefore, students who have advanced to the nursing department have great interest and expectation on the anatomy subjects. In general, nursing students are studying anatomy with theories and models, and some universities practice on tour after dissection of medical consortium for short time. This is called the Cadaver practice. This study was carried out to investigate the thoughts and experiences of bioethics through nursing students' Cadaver practice. The interview data were processed through the analysis and interpretation process using the phenomenological research method, Giorgi method. As a result, 48 semantic units were derived, and then they were divided into 10 subcomponents and divided into 6 categories. As a result of the analysis, the experience of nursing students' bioethics was tied to the topic of six questions. For example, 'what about the respect and responsibility of nursing students in Cadaver?', 'What about your experience with the Cadaver experiment and bioethics?', 'What was the academic achievement of the actual human body structure viewing experience with cadaver?', 'What was the connection with theory?', 'What was your intention to recommend to others?', 'What was your perception and interest in the Cadaver experiment?'. Analyzes were integrated into 10 structures; "Thank you for your donation", "want others to refuse donation", "Burden of practice", "Good opportunities for learning", "Understand better", "Should study harder", "Memory is better", "Compared to theory", "Good experience", "Want to rejoin". The general structural description of the participants' meanings is summarized as follows. Nursing college students who participated in the Cadaver had a gratitude for the donor, but they said they would like to talk to others about donating organs. Before they went to practice, they felt a lot of pressure on the dissection of the cadaver, but they went to the practice and thought that it was a good opportunity to learn by doing well. Specifically, they understood that they had better understanding than the theoretical lesson, and that they were more eager to study their major through practice. In other words, most of them were more memorable and they would like to participate again if the opportunity comes next time. The results of this study show that the practice of Cadaver in nursing college students is very positive in terms of educational effectiveness. However, in terms of bioethics, it can be seen that the education process is somewhat unsatisfactory. Therefore, the systematic bioethics education should be prepared before the practice in the nursing college students' Cadaver practice.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.39-47
• /
• 2015

In this paper, we propose a new time synchronization algorithm using CoAP(constrained-application protocol) in sensor network environment, which handles a technique that synchronizes an explicit timestamp between sensor nodes not including an additional module for time-setting and sensor node gateway linked to internet time server. CoAP is a standard protocol for sensor data communication among sensor nodes and sensor node gateway to be built much less memory and power supply in constrained network surroundings including serious network jitter, packet losses, etc. We have supplied an exact time synchronization implementation among small and cheap IP-based sensor nodes or non-IP based sensor nodes and sensor node gateway in sensor network using CoAP message header's option extension. On behalf of conventional network time synchronization method, as our approach uses an exclusive protocol 'CoAP' in sensor network, it is not to become an additional burden for synchronization service to sensor nodes or sensor node gateway. This method has an average error about 2ms comparing to NTP service and offers a low-cost and robust network time synchronization algorithm.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.85-93
• /
• 2007

This paper presents new LVDS I/O circuits with a high noise margin for use in highly parallel I/O environments. The proposed LVDS I/O includes transmitter and receiver parts. The transmitter circuits consist of a differential phase splitter and a output stage with common mode feedback(CMFB). The differential phase splitter generates a pair of differential signals which have a balanced duty cycle and $180^{\circ}$ phase difference over a wide supply voltage variation due to SSO(simultaneous switching output) noises. The CMFB output stage produces the required constant output current and maintains the required VCM(common mode voltage) within ${\pm}$0.1V tolerance without external circuits in a SSO environment. The proposed receiver circuits in this paper utilizes a three-stage structure(single-ended differential amp., common source amp., output stage) to accurately receive high-speed signals. The receiver part employs a very wide common mode input range differential amplifier(VCDA). As a result, the receiver improves the immunities for the common mode noise and for the supply voltage difference, represented by Vgdp, between the transmitter and receiver sides. Also, the receiver produces a rail-to-rail, full swing output voltage with a balanced duty cycle(50% ${\pm}$ 3%) without external circuits in a SSO environment, which enables correct data recovery. The proposed LVDS I/O circuits have been designed and simulated with 0.18um TSMC library using H-SPICE.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.46-51
• /
• 2013

In this paper, the optimum placement and shape of UHF antenna on the unmanned aerial vehicle (UAV) are analyzed by using the electromagnetic (EM) simulation on the various locations. The FEKO was used for the EM-simulation. In order to reduce the complexity of simulation and minimize the runtime and memory usage, the composite aircraft structure is simplified as the PEC model excluding the radome structure. The simulation was performed on the wing and ventral fin of UAV, and the antenna shape used the monopole, dipole, and bent monopole antennas. When the monopole antenna is mounted under the wing, two antennas need to be mounted under the right and left wings, and those antennas have to be switched as the direction of UAV wing to the line of sight (LOS) data-link (DL) ground antenna. In the case of mounting under the ventral fin, one antenna can be used regardless of the direction of UAV wing to the LOS DL ground antenna. Also, the antenna gain is improved by the blockage reduction. The antenna gain is further improved by using the bent monopole antenna. The optimum solution of UHF antenna placement and shape on UAV is to mount the bent monopole antenna under the ventral fin.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.545-559
• /
• 2020

In this paper, we propose a content creation framework that enables users without programming experience to easily create interactive media content that responds to user gestures. In the proposed framework, users define the gestures they use and the media effects that respond to them by numbers, and link them in a text-based configuration file. In the proposed framework, the interactive media content that responds to the user's gesture is linked with the dynamic projection mapping module to track the user's location and project the media effects onto the user. To reduce the processing speed and memory burden of the gesture recognition, the user's movement is expressed as a gray scale motion history image. We designed a convolutional neural network model for gesture recognition using motion history images as input data. The number of network layers and hyperparameters of the convolutional neural network model were determined through experiments that recognize five gestures, and applied to the proposed framework. In the gesture recognition experiment, we obtained a recognition accuracy of 97.96% and a processing speed of 12.04 FPS. In the experiment connected with the three media effects, we confirmed that the intended media effect was appropriately displayed in real-time according to the user's gesture.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.4
• /
• pp.1-10
• /
• 2010

The scientific verification of the physiological and psychological effects that result from interaction with green plants would not only provide objective knowledge on the psychological effect of green but would also establish useful grounds for the creation of green spaces that consider human emotions. The present study measured the cerebral activity(cerebral blood flow) and the autonomic nervous system activity (blood pressure, pulse rate, amylase) of fifteen Korean male subjects as they inhaled the natural scent diffused by pine needles. Impression and mood state evaluations of the reactions to the pine scent were carried out using the SD method and POMS. Cerebral activity was observed to be significantly activated in the feeling, judgment, and motor areas of the frontal lobe, as well as the memory area in the temporal lobe. Verbal evaluations by the SD method and POMS indicated a pine scent left natural but stimulated and active impressions, provided vigor, and also reduced confusion. The autonomic nervous system activities, however, showed no significant differences. These findings verified scientifically that a pine scent vitalizes humans both physiologically and psychologically. These results could be useful as fundamental data for the design of green spaces that consider human emotional aspects.