• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.377.2-377
• /
• 2002

In optical disk drives (ODD), the demands of high data density and high speed have been increasing rapidly to achieve high data capacity and data transfer rate The use of short wavelength laser and high track following performance are needed to raise data density and data rate. For high-performance actuator, the improvement of linearity and acceleration become more important. (omitted)

• 자원환경지질
• /
• 제27권3호
• /
• pp.289-294
• /
• 1994

This paper describes an effective utilization method of well logging data and boring cores for understanding the geology of Keoje-do area. Six holes were drilled in 1988-1989, and all rock cores were recovered. Nevertheless, seven kinds of logs were carried out in each borehole. The geologic situations of the drilling sites are accurately evaluated from a comparison between core descriptions and well logging data. Porosities and clay contents of sedimentary rocks can be calculated using the data of density and gamma-ray logs. Fractured zones are easily detected from the change in inside diameter of borehole by caliper log. Sonic, density and gamma-ray logging data clearly indicate alternated and dyke zones; the former can be detceted from an acoustic wave attenuation and a decline of compaction by sonic and density logs, the latter can be detected from the amount of potassium contents of bed rock and dyke by gamma-ray log.

• Structural Engineering and Mechanics
• /
• 제68권1호
• /
• pp.39-51
• /
• 2018

In this study, a frequency domain model updating method is presented using power spectral density (PSD) data. It uses the sensitivity of PSD function with respect to the unknown structural parameters through a decomposed form of transfer function. The stiffness parameters are captured with high accuracy through solving the sensitivity equations utilizing the least square approach. Using numerically noise polluted data, the model updating results of a truss model prove robustness of the method against measurement and mass modelling errors. Results prove the capabilities of the method for parameter estimation using highly noise polluted data of low ranges of excitation frequency.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권8호
• /
• pp.3617-3619
• /
• 2012

Background: The completeness of cancer registration is a major validity index of any reported cancer incidence. The present study aimed to evaluate the esophageal cancer incidence registered in the Tehran Metropolitan Area Cancer Registry. Materials and methods: The data on esophageal cancer abstracted from three sources of 1) pathology departments, 2) medical records, and 3) death certificates during 2003 till 2007 were utilized. The completeness of the data sources were evaluated using coverage (defined as the proportion of a community population with esophageal cancer identified by the source) and density (defined as the proportion of non-empty fields of the data by source). Results: A total 1,404 cases of esophageal cancer were reported for the duration of the study. Pathology provided 771, medical records 432, and death certificates 609. The coverage was 0.55 for pathology, 0.31 for medical records, and 0.43 for death certificates. The respective density values were 0.82, 0.96 and 0.98, respectively. Pathology (0.45) was the most complete source followed by medical records (0.42), and death certificates (0.29). Discussion: A low degree of completeness dictates putting more effort into case finding plus abstracting data more thoroughly.

• Journal of the Korean Data and Information Science Society
• /
• 제25권1호
• /
• pp.219-226
• /
• 2014

In this paper, we derived estimators of reliability P(Y < X) and the distribution of ratio in the bivariate exponential density. We also considered the means and variances of M = max{X,Y} and m = min{X,Y}. We finally presented how E(M), E(m), Var(M) and Var(m) are varied with respect to the ones in the bivariate exponential density.

• Journal of the Korean Data and Information Science Society
• /
• 제14권2호
• /
• pp.247-255
• /
• 2003

Hypothesis testing for the equality of two distributions were considered. Nonparametric kernel density estimates were used for testing equality of distributions. Cross-validatory choice of bandwidth was used in the kernel density estimation. Sampling distribution of considered test statistic were developed by resampling method, called the bootstrap. Small sample Monte Carlo simulation were conducted. Empirical power of considered tests were compared for variety distributions.

• Journal of the Korean Data and Information Science Society
• /
• 제21권1호
• /
• pp.195-200
• /
• 2010

In this paper, we consider estimators and a condence interval for a reliability in two independent right truncated Rayleigh distributions and consider the density of a ratio in two independent right truncated Rayleigh distributions. And we obtain the density of an estimator for a changing point in the density of a ratio in two independent right truncated Rayleigh distributions.

• Journal of the Korean Data and Information Science Society
• /
• 제16권4호
• /
• pp.1159-1165
• /
• 2005

Basu et al. (1998) proposed a new density-based estimator, called the minimum density power divergence estimator (MDPDE), which avoid the use of nonparametric density estimation and associated complication such as bandwidth selection. Woodward et al. (1995) examined the minimum Hellinger distance estimator (MHDE), proposed by Beran (1977), in the case of estimation of the mixture proportion in the mixture of two normals. In this article, we introduce the MDPDE for a mixture proportion, and show that both the MDPDE and the MHDE have the same asymptotic distribution at a model. Simulation study identifies some cases where the MHDE is consistently better than the MDPDE in terms of bias.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1043-1048
• /
• 2006

This paper aimed to verify and develop lighting design data for offices in Korea. It focused on a Korean standard office value relative to lighting density and the evaluation of lighting energy and cooling load. When planning indoor lighting design, we generally utilize the lighting density value which is set $14W/m^2$ by the ASHRAE/IES standard office value. However, the value is not appropriate to apply in Korea where higher efficiency lamps are more popular than others. For calculation of a proper lighting density of Korea, we analysed distribution curves of luminous intensity(2-lamp fluorescent lighting fixture with Parabolic) and derived the new lighting density $12.64W/m^2$ as Korea standard office value. In the simulation using this value, it was shown that lighting energy and cooling load could be reduced.

• Journal of Information Processing Systems
• /
• 제19권6호
• /
• pp.778-790
• /
• 2023

Although density peak clustering can often easily yield excellent results, there is still room for improvement when dealing with complex, high-dimensional datasets. One of the main limitations of this algorithm is its reliance on geometric distance as the sole similarity measurement. To address this limitation, we draw inspiration from the information bottleneck theory, and propose a novel density peak clustering algorithm that incorporates this theory as a similarity measure. Specifically, our algorithm utilizes the joint probability distribution between data objects and feature information, and employs the loss of mutual information as the measurement standard. This approach not only eliminates the potential for subjective error in selecting similarity method, but also enhances performance on datasets with multiple centers and high dimensionality. To evaluate the effectiveness of our algorithm, we conducted experiments using ten carefully selected datasets and compared the results with three other algorithms. The experimental results demonstrate that our information bottleneck-based density peaks clustering (IBDPC) algorithm consistently achieves high levels of accuracy, highlighting its potential as a valuable tool for data clustering tasks.