Recently, ways for accurately measuring the three dimensional movements of hand are actively researched so as to utilize the measurement data for therapeutic and rehabilitation programs. This research paper aims to introduce a product called Myo Armband, a wearable device comprised of a 3-axis accelerometer, a 3 axis gyroscope, and electromyographic sensors. We compare Armband's performance with that of the Motion Capture System, which is known as a device for providing fairly accurate measurements for angular movements of objects. Dart throwing and wrist winding motions comprised movement scenarios. This paper also discusses one of Armband's advantages - portability, and suggests its potential as a substitute for previously used devices. Decent levels of measurement accuracy were obtained which were comparable to that of three dimensional measurement device.
Proceedings of the Korean Information Science Society Conference
/
2001.10a
/
pp.646-648
/
2001
최근의 침입이나 공격들은 광범위한 망의 이용과 긴 시간을 두고 공격을 행하는 추세로 발전하고 있다. 이러한 공격들에 대한 탐지 및 대응을 위하여 침입탐지 시스템들은 시스템에 걸쳐 있는 정보의 공유, 침입이나 공격에 적극 대응하기 위한 자원의 이용 등의 상호협력이 요구되고 있다. 본 논문에서는 시스템에서 기록하는 많은 종류의 로그 정보를 침입 탐지에 이용할 수 있는 정보만을 추출하고 분석하여 저장함으로써, 침입 탐지 시스템이 이용할 수 있게 하고, 다른 시스템에서 정보를 필요로 할 때 제공할 수 있으며, 또한 침입이라 간주되어지는 행위에 대하여 대응하기 위한 추적 및 정보 수집 그리고 접속 거부 등을 행하는 Agent 시스템의 설계 및 개발을 목적으로 한다. 이를 위해 리눅스 시스템 기반 하에서 로그를 기록하는 SYSLOG, 발생한 시스템 콜 정보를 기록하는 LSM, 망에서 시스템으로 들어오는 패킷을 분석하는 Pcap Library를 이용한 로그 등을 통합하는 과정을 설명하고, 침입탐지 시스템에 의해서 침입이라 판단되었을 경우, DART Agent가 그 경로를 역추적하고 여러 시스템에 걸쳐 있는 정보들을 수집하는 과정, 고리고 공격에 대한 대응을 하는 과정을 설명한다.
Journal of the Korean Society of Clothing and Textiles
/
v.33
no.7
/
pp.1109-1120
/
2009
This study develops a fitted torso type basic pattern for men by utilizing 3D body scan data. Recent fashion trends are reflected in the development of the pattern. The subjects were 15 men in their 20's, who wear size 95 (M size). Body scan data was obtained through a 3D whole body scanner (WB4, Cyberware, USA), and a body surface development figure for developing male fitted torso type basic pattern was attained through the use of Rapid Form 2006 as well as Auto CAD 2006 programs. The results are as follows: A body surface development figure through body surface segment method showed high exactitude in an error range of 100$\pm$1%. In addition, it occurred in an error range of 100:1:3% because of the hard scanning conditions in the incline of the shoulder and armpit areas. However, the body surface development figure as well as the direct measurement results can be used as basic data for the given patternmaking since the error range falls into 100$\pm$3%. Dart amounts obtained from the average cross section were center back 2.2cm (24.3%), back armpit point 3.8cm (41.8%), front armpit point 3.0cm (33.9%). As shown the jacket pattern, the biggest dart amount was portioned out at the back armpit point. The drafting equations for the development pattern acquired are as follows; Full width=C/2+5cm, back length=height/4-1cm, armhole depth=(C/10+12cm)+3cm, back width=2C/10+2cm, front width=2C/10. The development pattern was a fitted torso basic pattern that was composed of 3 pieces, so it would be very useful in developing shirt or jacket patterns. According to the results of the evaluation of the developed pattern appearance, it obtained higher scores of over 3.5 points in almost items, meaning that the developed pattern is appropriate for a male fitted torso type basic pattern. It suggests a possibility of patternmaking from a body surface development figure in 2-D to prototype.
Journal of the Korea Academia-Industrial cooperation Society
/
v.18
no.2
/
pp.600-608
/
2017
This study analyzed the management index, debt ratio, and business performance of livestock agricultural farming corporations since the Korea international financial reporting standards (K-IFRS) was introduced in 2011. In addition, this study was based on credible accounting reports by the financial supervisory service's DART (data analysis, retrieval and transfer) system. First, after analyzing the key management index, the results showed that the current ratio, debt ratio, and current liabilities ratio decreased and the ratio of the owners increased on the safety index. Regarding the profitability index, the ROA (return on total assets), ROE (return on equity), and ROS (return on sales) increased slightly in 2014 compared to 2013. The overall growth and external growth on the growth index have not increased. Second, an analysis of the debt ratio and business performance, the debt ratio has a negative effect on the ROA and ROS. These results show that the use of debt of livestock agricultural farming corporations contributes to the external growth but it has a negative effect on business performance. These results show that management should consider solutions for the increase in sales to achieve cost reductions. In addition, the debt ratio should be reduced and solutions for an increase in revenue are needed to reduce management expenses, such as propagation of technical development.
This study analyzed the determinants of capital structure based on the financial statements of agricultural corporations disclosed on the DART(data analysis, retrieval and transfer system) of the Financial Supervisory Service since 2011, when the Korea international financial reporting standards (K-IFRS) was introduced. There have been many empirical studies on the capital structure so far, but there are no studies targeting agricultural corporations. The sample period of agricultural corporations was from 2015 to 2019, with the debt ratio as the dependent variable, and among the variables suggested as meaningful in existing empirical studies, ROA(profitability), SIZE(corporate size), LIQ(liquidity), TA(tangible asset ratio), FA(fixed long-term suitability ratio), and GROWTH(growth potential) were selected as independent variables and panel data analysis was performed. As a result of the analysis, it was found that the debt ratio decreased as the ROA and SIZE of agricultural corporations increased. This can be interpreted as supporting the pecking order theory rather than the static trade-off theory in the relationship between the ROA and SIZE of Korean agricultural corporations with the capital structure. In addition, it was found that the debt ratio increased as the FA increased. These results suggest that Korean agricultural corporations need to establish a financing policy in consideration of ROA, SIZE, and FA.
The purpose of the present study is to develop a grading deviation, which is appropriate for the body type of women in thirties, by analyzing the three-dimensional body type. The materials for the study were adopted from the body measurement data of women in the age group of 30 to 39 years old, provided from Size Korea. By reflecting the factor analysis results using the three-dimensional shape measurement, deviations were derived. First, six factors influencing the changes in human body shape were derived as waist-hip length factor, bust-waist shape factor, back protrusion back shoulder factor, bust length factor, shoulder length factor, and frontal waist dart factor. The bust size and height, which can be easily utilized for the top original grading, were used for deriving a regression formula, and the deviation was set in accordance with the result. Second, by applying the deviation which reflects the changes in the body shape, the crimps which were generated due to the application of existing deviation were remarkably reduced, indicating that the grading of the present study is more fitting than the existing one. The deviation derived by the analysis of actual increase and decrease of body size was more fitting than the existing one. This was proved by actual wearing experiment, which represents the significance of this study.
Journal of the Korean Society of Clothing and Textiles
/
v.42
no.2
/
pp.251-268
/
2018
This study suggests a fashion design using aesthetic characteristics of works by Kate MccGwire, a modern sculptor paying attention to soft sculpture materials such as feathers. In this research on MccGwire works, their internal meanings may be derived as the dualism of familiarity, movement and consciousness. Works also have aesthetic characteristics of overlapping, fluidity and twist. Using such characteristics, 4 one piece dresses and 2 vest dresses were made. Research findings are as follows. First, aesthetic characteristics of MccGwire works could be expanded into expressive areas of silhouettes and details in fashion. Second, visual flow and concentration could be expressed by gradual coloration of feather colors. Third, dart manipulation could be applied naturally by details and curve silhouettes of fashion design. Fourth, touch of feather material could be expressed fully by leaving the edge of garments raw. Fifth, spatiality of fashion could be implemented partially by applying decorative saddle stitching to costume design details. This study explored a potential of soft sculpture occurred during a transitional process of objet pursued by 20th century's avant-garde artists applicable to fashion design ideas that suggested methods for contemporary creative design.
Draping design system organized by European about 13C has been developed greatly for a long while, but for the purpose of the practical use the Dress form similar to human body has been needed. In order to make three-dimensional effect as fitting Muslin ot the Dress form. the Basic lien has to be established in Muslin and Dress form each. At this time, Shoulder-blade level is indicated from various angles : measure down 10cm from the back neck point, a quarter of the back neck point to the waist lie, the half-way point between neckline and bust line, measure down 41 inches from the back neck line, measure down 3 inches from the top edge of the muslin at center back and cross mark for neck line, and so forth. This study established the Basic line through the two ways of them (B.N.P∼B.L/2, B.N.P∼W.L/4), did tight fitting to the 5 kinds of Dress forms which ar normal type in the drop value(the difference between hip circumference and bust circumference), and acquired Basic Pattern. After the experiment, fitness are throughly investigate by statistical analysis of measurements. As a result, this study finds out that fit is proper when shoulder blade level is situated on a fourth of the back neck point to the waist line and a quarter point between back neck point and waist line, and waist dart is situated on the back center line and princess line.
This study outputs calculation of regression of each items for production of torso basic pattern according to 6 body types as the result of another study and intends to present drawing method of torso model by short measure method modified and supplied and supplied by experiments of wearing clothing. SAS(Statistical Analysis System) is used for figures management and methods for analysis used are Frequency Analysis, Means Analysis, Regression Analysis, Correlation Analysis, etc. Results are as follows. 1. Correlation analysis is used to output the size necessary for torso prototype drawing by sort measure method and waist front length, back length, crotch length, shoulder point-cerricale-shoulder point, bust circumference, waist circumference, weight, etc, are set up as representative items calculation of regression of each type is suggested. 2. In the result of experiment of the first wearing clothing intended for 5 in each type and the whole 30, to develop torso prototype drawing method by short measure method, as we find some problems of the shape and propriety of neck root circumference line, the position of shoulder point, pulling or hold armpit parts, waist circumference line, the degree of dissatisfaction is high, so the second experiment of wearing clothing is propriety of each part is improved, all items except the length and quantity of shoulder dart, waist in back bodice, clearance quantity of hip circumference, and the place of shoulder line in side bodice. So, it was modifed and supplied and then the third torso prototyped drawing method by shout measure method was suggested. The third prototype drawing method was suggested, by modifying and supplying.
The purpose of this study was to make patterns for lingerie look after examining expressive characteristics and constructive elements of lingerie look. As underwear became outerwear, position of wearing, materials, and details had changed, and the phenomenon to expose one's body has increased. The constructive elements found in the lingerie look were classified into silhouette, fastening, dart, and cutting line. Many of corset looks revealed cutting lines such as diagonal, perpendicular, and horizon. Brassiere look used perpendicular rutting lines or horizontal cutting lines passing through the bust point in order to highlight the volume by adding darts. There were styles Of chemise looks that used princess lines or separately added a brassier on the breast. Based on the examination of the elements, a total of four apparel works were created, including one flat pattern and three draping patterns. With new infra-apparel designs and patterns, this study was able to artificially highlight the body and express the beauty of costume through revelation of body. In addition, it explored the possibility that the phenomenon that underwear becomes outerwear may be a new idea of dress designing.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.