• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.237-244
• /
• 2011

Generally, X-ray examinations for dentistry use low energy radiation. It explains that the radiations are mainly absorbed to a human body because of the weak permeability. We made up some counterplans for decrease in radiation exposure, when guardians and radiologists are overexposed owing to unavoidable circumstances. The equipments for the test are GX-770 and CRANEX TOME CEPH which are used for various exams. Besides we measured the radiations in the projection room and in the control room using model 2026c and 20X6-1800. According to the test, the measurement value in the control room was low dose below $20{\mu}R$, the maximum dose in the projection room was $702.8{\mu}R$ and the measurement value of back dose was higher than lateral one. As the result, if we use a shielding door, it's effective for radioprotection and when we didn't prepare protectors, we should secure appropriate distance and be situated at the side area($90{\sim}135^{\circ}$) on the basis of centeral radiation. That way will provide valuable aid for radioprotection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3839-3845
• /
• 2010

In this study, the patterns of people who get dental services from unqualified dental practitioners were identified by using "2006 National Dental Health Investigation". There were 4,543 people in total and the group was divided into two groups - those who had experience of receiving dental services from unqualified practitioners and of those who had not. The most pattern model was CHAID. It was patterned that 39% of those who are more than 68 years would experience such unqualified dental service, and it was found that 3% of those who are less than 33 years experienced such a service. It was found that 45% of those who are 55 or 68 years and woman would experience such unqualified dental service, and 32% of those who are 55 or 68 years and man experienced such a service. With the increase in health awareness, the burden of medical bills is also rising. However, cases of unqualified dental treatments that could cause extremely dangerous symptoms are also rising recently. Therefore it is most important to anticipate those groups who are most exposed to unqualified dental services, and educate them with appropriate information and publicise about the danger.

• 한국벤처창업학회:학술대회논문집
• /
• 2008.11a
• /
• pp.83-112
• /
• 2008

In this study, the effects of the founder's characteristics on venture's business success factors for pet business was investigated focused on the pet hospitals. The effects of the founder's background and psychological characteristics, the business start-up preparing procedure characteristics, and service factor characteristics for customers on the business performance was analyzed by classifying it into financial business performance and non-financial business performance for the he pet hospitals. The questionnaire survey for 150 pet hospitals located in Seoul and Gyunggi-do area was performed, and the main conclusions was drawn as follows. First, as a result of research model analysis for financial business performance among the business performance, it was analyzed that the founder's academic background factor among the founder's background factors had a statistically significantly negative Influence on the financial business performance, on the contrary, the control locus factor among the founder's psychological factors, and the financing factor among the business start-up preparing procedure factors had a statistically significantly positive influence on the financial business performance. Second, as a result of research model analysis for non-financial business performance among the business performance, it was analyzed that the danger acceptance propensity factor among the business start-up preparing procedure factors and the intangible service quality factor among the service quality factors had a statistically significantly positive influence on the non-financial business performance.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.6
• /
• pp.21-30
• /
• 2017

This study analyzed the ground characteristics region by designating 3 research areas, Anrim-dong in Chungju City, Busa-dong in Daejeon Metropolitan City and Sinan-dong in Andong City out of the areas subject to concentrated management to prepare for sediment disaster in downtown areas. The correlation between ground characteristics were observed by using characteristics (crown density, root cohesion, rainfall characteristics, soil characteristics) and the risk areas were predicted through sediment disaster prediction modeling. Landslide MAPping (LSMAP), Stability Index MAPping (SINMAP) and Landslide Hazard MAP (LHMAP) were used for the comparative analysis of the hazard prediction model for sediment disaster. As a result of predicting the sediment disaster danger, in case of SINMAP which was generally used, excessive range was predicted as a hazardous area and in case of the Korea Forest Service's landslide hazard map (LHMAP), the smallest prediction area was assessed. LSMAP predicted a medium range of SINMAP and LHMAP as hazardous area. The difference of the prediction results is that the analysis parameters of LSMAP is more diverse and engineering than two comparative models, and it is found that more precise prediction is possible.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.2
• /
• pp.257-269
• /
• 2012

Global crisis expedites the change in the environment of industry and puts small size enterprises in danger of mass bankruptcy. Because of this, domestic small size enterprises is an urgent need of restructuring. Based on the small business data registered in the Credit Guarantee Fund, we estimated the survival probability in the context of the survival analysis. We also analyzed the survival time which are distinguished depending on the types of business in the small business. Financial variables were also conducted using COX regression analysis of small businesses by types of business. In terms of types of business wholesale and retail trade industry and services were relatively high in the survival probability than light, heavy, and the construction industries. Especially the construction industry showed the lowest survival probability. In addition, we found that construction industry, the bigger BIS (bank of international settlements capital ratio) and current ratio are, the smaller default-rate is. But the bigger borrowing bond is, the bigger default-rate is. In the light industry, the bigger BIS and ROA (return on assets) are, the smaller a default-rate is. In the wholesale and retail trade industry, the bigger bis and current ratio are, the smaller a default-rate is. In the heavy industry, the bigger BIS, ROA, current ratio are, the smaller default-rate is. Finally, in the services industry, the bigger current ratio is, the smaller a default-rate is.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.767-790
• /
• 2009

Setting up a priorityfor an embedded system is greatly significant because a release plan at the early stage of product developments can properly be established through right decision making procedures based on the priorities. For instance, both dependencies among requirements and the aspects of product developers should be considered into the priorities to improve the embedded system. Especially, trade-offs among the requirements, which are quite different depending on H/W and S/W architecture styles they use, should be acknowledged without exception. However, the selection process on the priority has hitherto been fairly systematic in the existing environment where hardware and software are not being considered at once. Therefore, this paper suggests an dependency and aspect-based model and process for the requirements of the priority. For this, the paper analyzes the trade-offs between the requirements depending on the disparate Architecture styles of H/W and S/W, and it also reflects the viewpoints of the developers. For thelast thing, the model and process suggested will be applied to the case of the development of both cell phones and cameras to gain authenticity and reliability. In conclusion, the danger occurring when the release plan is constructed can be minimized by screening the priorities that optimizes the embedded system more explicitly.

• Cross-Cultural Studies
• /
• v.33
• /
• pp.143-169
• /
• 2013

Recently, because of the danger and damages that following the steady development of scientific technologies, natural science is faced with many humane and ethical problems. So it is asserted the interdisciplinary with social and human science. However, it comes commonly that the ethical issues such as world view and one's view of life caused the development of sociology, especially development of the market economy. But in many cases, the interdisciplinary can be useful for widen the view of scholars. The interdisciplinary is actually connected with the problems of philosophy, and located in that domain. In this case, this is noticed as a model to the philosophers in 18th century, especially Denis Diderot. Diderot published De $l^{\prime}interpr{\acute{e}}tation$ de la nature during editing the Encyclopedia, from there he picked out the contents from piles of documents of Encyclopedia. Even though the contents or opinions of De $l^{\prime}interpr{\acute{e}}tation$ de la nature are inaccuracy or erroneous, it shows that how human-social science and natural science encountered. Diderot studied mathematics and then Diderot accepted to the natural science proposal, he approaches philosophy with translate English books to the French. Next he understood natural science by reading Buffon and Maupertuis, and during working for Encyclopedia, he possessed his knowledge that he can claim his opinion to other scholars. However in this De $l^{\prime}interpr{\acute{e}}tation$ de la nature, Diderot who sometimes rebutted other scholars' theory and demonstration, tried to build a philosophy on metaphysics in order to it was important for himself that he imposed the methods of science and importance of experience. Anyhow, this De $l^{\prime}interpr{\acute{e}}tation$ de la nature cause consider the recognition of Diderot in the field of natural science, and is suggested as a model about his Nature. This mean that it is an expression of his philosophy, and the content is found from natural philosophy and empirical philosophy. Like giving these attache the importance of method study for science and technique, these are targeted the promotion of popularization of natural-science and scientific-technology. Also it advocates fulfilling from reasonable philosophy to empirical philosophy. Therefore, the philosophy which was speculative and abstracted became his philosophy which was writing the meaning, as waiting the discovery of science. And at that time, the humanities made interdisciplinary with natural science.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.30-39
• /
• 2023

Large dams, which are critical infrastructures for disaster prevention, are exposed to various risks such as aging, floods, and earthquakes. Better dam safety inspection and diagnosis using digital transformation technologies are needed. Traditional visual inspection methods by human inspectors have several limitations, including many inaccessible areas, danger of working at heights, and know-how based subjective inspections. In this study, drone photogrammetry was performed on two large dams to evaluate the applicability of digital data-based dam safety inspection and propose a data management methodology for continuous use. High-quality 3D digital models with GSD (ground sampling distance) within 2.5 cm/pixel were generated by flat double grid missions and manual photography methods, despite reservoir water surface and electromagnetic interferences, and severe altitude differences ranging from 42 m to 99.9 m of dam heights. Geometry profiles of the as-built conditions were easily extracted from the generated 3D mesh models, orthomosaic images, and digital surface models. The effectiveness of monitoring dam deformation by photogrammetry was confirmed. Cracks and deterioration of dam concrete structures, such as spillways and intake towers, were detected and visualized efficiently using the digital 3D models. This can be used for safe inspection of inaccessible areas and avoiding risky tasks at heights. Furthermore, a methodology for mapping the inspection result onto the 3D digital model and structuring a relational database for managing deterioration information history was proposed. As a result of measuring the labor and time required for safety inspection at the SYG Dam spillway, the drone photogrammetry method was found to have a 48% productivity improvement effect compared to the conventional manpower visual inspection method. The drone photogrammetry-based dam safety inspection is considered very effective in improving work productivity and data reliability.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.1
• /
• pp.36-44
• /
• 2006

In this study, we constructed a forest fire danger map in the Yeongdong area of Gangwon-do and Northeastern area of Gyeongsangbuk-do using a forest fire rating model and geographical information system (GIS). We investigated the appropriate positions of the automatic weather station (AWS) and a comprehensive network solution (a system including measurement, communication and data processing) for the establishment of an optimum mountain meteorological observation network system (MMONS). Also, we suggested a possible plan for combining the MMONS with unmanned monitoring camera systems and wireless relay towers operated by local governments and the Korea Forest Service for prevention of forest fire.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.21-36
• /
• 2019

Dead fuel moisture content is a key variable in fire danger rating as it affects fire ignition and behavior. This study evaluates simple regression models estimating the moisture content of standardized 10-h fuel stick (10-h FMC) at three sites with different characteristics(urban and outside/inside the forest). Equilibrium moisture content (EMC) was used as an independent variable, and in-situ measured 10-h FMC was used as a dependent variable and validation data. 10-h FMC spatial distribution maps were created for dates with the most frequent fire occurrence during 2013-2018. Also, 10-h FMC values of the dates were analyzed to investigate under which 10-h FMC condition forest fire is likely to occur. As the results, fitted equations could explain considerable part of the variance in 10-h FMC (62~78%). Compared to the validation data, the models performed well with R2 ranged from 0.53 to 0.68, root mean squared error (RMSE) ranged from 2.52% to 3.43%, and bias ranged from -0.41% to 1.10%. When the 10-h FMC model fitted for one site was applied to the other sites, $R^2$ was maintained as the same while RMSE and bias increased up to 5.13% and 3.68%, respectively. The major deficiency of the 10-h FMC model was that it poorly caught the difference in the drying process after rainfall between 10-h FMC and EMC. From the analysis of 10-h FMC during the dates fire occurred, more than 70% of the fires occurred under a 10-h FMC condition of less than 10.5%. Overall, the present study suggested a simple model estimating 10-h FMC with acceptable performance. Applying the 10-h FMC model to the automatic mountain weather observation system was successfully tested to produce a national-scale 10-h FMC spatial distribution map. This data will be fundamental information for forest fire research, and will support the policy maker.