• 사상체질의학회지
• /
• 제25권4호
• /
• pp.320-329
• /
• 2013

Objectives We carried out this study to know that there is any differences on the health condition of the middle aged women between Sasang coustitution. We used Diagnosis System of Oriental Medicine(DSOM) for diagnosis and determining pattern identification. Methods This research was approved by the Dongeui University Oriental Hospital Institutional Review Board (certificate no. 2011-06). From March 2012 to October 2012, we examined Kupperman's index, the MENQOL, DSOM, and Sasang Constitution of 291 women from the general population, with ages ranging from 40 to 60 years. And we compared the results statistically by the chi-square test and F-test. Results and Conclusions We excluded 4 Taeyangin to analyze because they were few, and analyzed 287 subjects which were 53 Soyangin, 131 Taeeumin, and 103 Soeumin. 1. The pathogenic factors that showed significant differences were deficiency of qi, insufficiency of Yin, heat on the frequency of the output and deficiency of qi, heat, phlegm on the mean of pathogenic factor score. Deficiency of qi was higher in Soeumin, insufficiency of Yin and heat were higher in Taeeumin, and phlegm was higher in Taeeumin and Soeumin. Overall, Soyangin tended to be lower than others on both the frequency of the output and the mean of pathogenic factor score. 2. The middle aged women with ages ranging from 40 to 60 years tended to be dryness, kidney, damp and became to be blood-deficiency, stagnation of qi, heart easily. Soyangin was more health than others, Taeeumin tended to be heat, phlegm, insufficiency of Yang, and Soeumin tended to be deficiency of qi.

• 대한한의학회지
• /
• 제21권3호
• /
• pp.213-219
• /
• 2000

We treated a 53 year-old male patient. He had alcoholic liver cirrhosis and diabetes. The main symptoms were fatigue, ascites, edema, anorexia, indigestion, constipation, and abdominal pain. We diagnosed him as 'the retention of pathogenic damp-heat in the liver and gall bladder’ and adminstered Saenggangeonbi-tang three times a day. We observed clinical symptoms, liver function test(AST, ALT, ${\gamma}-GT$, ALP, total bilirubin), nutritional state(total protein, albumin) and capillary blood glucose. After treatment, all the main symptoms disappeared and the patient's nutritional state has improved. Child's grade using the improvement index in liver cirrhosis has changed from B to A. Although the very mechanism of Saenggangeonbi-tang was not proven, we could suggest that Saenggangeonbi-tang is not toxic to the liver and has a good effect on alcoholic liver cirrhosis with diabetes mellitus.

• Current Photovoltaic Research
• /
• 제8권1호
• /
• pp.12-16
• /
• 2020

This study investigates the degradation characteristics of different material types of ethyl vinyl acetate (EVA) and polyolefin (POE) with combining transparent backsheet. To this end, we fabricated samples with structure of glass/encapsulant/transparent backsheet for each type of encapsulants, and shingled Si modules with the same structure. The samples were then subjected to accelerated test by storing under damp heat condition of 85℃ and 85% RH. As a result, encaplsulant discoloration was observed, which the transmittance of the samples with EVA decreased in a rapid rate than the samples with POE. The discoloration also affected a power degradation of the shingled modules with a reduction of current density, resulting that the module with EVA showed more drop on the efficiency than the modules with POE. Furthermore, corrosion of the soldered ribbon caused by acetic acid produced from the degraded EVA also contributed in fill factor reduction.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.776-791
• /
• 2014

A marvellous solar cell technology system based on organometal halide perovskites has recently shown an unprecedented progress in power conversion efficiency (PCE); the certified one of 17.9% and unconfirmed of 19.3%, as well as the estimated electricity with a generating cost lower than the half of conventional methods based on fossil fuels. In this report the present status of stability with regards to moisture, ambient temperature, ultraviolet and lead toxicity as well as the key technological developments for the early commercialization are covered. Comprehensive understanding of material science for perovskites is required, together with complete encapsulation technologies beyond those for OLEDs, in order to ensure a 20-year-longer-than lifetime of PSCs (perovskite solar cells) and the stability according to the IEC 61646 damp heat test standard, which will result in the replacement of silicon solar cells with PSCs.

• Current Photovoltaic Research
• /
• 제9권2호
• /
• pp.36-44
• /
• 2021

To endorse the reliability and durability of the solar photovoltaic (PV) device several tests were conducted before exposing to the outdoor field in a non-ideal condition. The PV module has high probability that intend to perform adequately for 30 years under operating conditions. To evaluate the long term performance of the PV module in diversified terrestrial conditions, one should use the outdoor performance data. However, no one wants to wait for 25 years to determine the module reliability. The accelerating stress tests performing in the laboratory by mimicking different field conditions are thus important to understand the performance of a PV module. In this review, we will discuss briefly about different accelerating stress types, levels and prioritization that are used to evaluate the PV module reliability and durability before using them in real field.

• 동의생리병리학회지
• /
• 제19권4호
• /
• pp.1082-1087
• /
• 2005

About the case of the cerebral infarction patient who has diagnosed Mitral Regurgitation in valvular heart disease and admissed to our hospital from 26. April. 2004 to 14. May. 2004, we diagnosed and treated him as heart disease due to wind, damp-heat at the point of Oriental Medicine and got the improvement in the chest pain, dyspnea and etc. so we report. We think that the patient must get the screen test exactly and treat the disease properly. and if we apply this result to clinical cases at the point of Oriental Medical base from gathering and researching more cases, it will arouse sympathy-the excellence of Oriental Medicine and make the necessity of the further research and report from now on.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권2호
• /
• pp.157-161
• /
• 2020

온실 가스 감축과 관련하여 BIPV (Building Integrated Photovoltaics)는 청정 에너지 자원을 바탕으로 도심의 빌딩에서 자체적으로 전력을 생산할 수 있는 중요한 기술이다. 특히, 페로브스카이트 물질은 투명성을 지니고 있으며, 다양한 색상 구현이 가능하여 BIPV용 태양전지로 주목받고 있다. 그러나 태양전지의 투과도와 효율은 서로 반비례 관계에 있어 두 인자를 모두 높이는 것은 쉽지 않은 과제이다. 따라서 본 논문에서는 투과도와 효율을 모두 높일 수 있는 반투명 페로브스카이트 태양전지 구조를 제안하고, 이를 평가하였으며, 안정성 평가를 위해 국제표준에 따른 내구성 평가를 수행하였다.

• 마이크로전자및패키징학회지
• /
• 제28권3호
• /
• pp.17-24
• /
• 2021

페로브스카이트 태양전지는 용액공정으로 제작되어 공정 중 전구체 조성제어를 통해 밴드갭을 용이하게 조절할 수 있다. 탠덤 태양전지의 상부셀로 활용하여 실리콘 태양전지와 접합 시 30% 이상의 효율 달성이 가능하지만, 페로브스카이트 태양전지의 낮은 안정성이 상용화의 걸림돌로 작용하고 있다. 아이오딘 이온 및 전극 물질 확산이 주된 열화기구로 알려져 있어 장기 안정성을 확보하기 위해서는 이러한 이온 이동의 방지가 필요하다. 본 연구에서는 층간소재와 페로브스카이트 광활성층 사이의 이온이동에 의한 열화현상을 관찰하고, 이를 억제하기 위해 페로브스카이트 소재와 은전극 사이에 버퍼층을 도입하여 소자의 안정성을 확보하였다. 85℃에서 300시간 이상 보관 시 버퍼가 없는 소자는 페로브스카이트 층이 PbI₂ 및 델타상으로 변화하며 변색되었으며 AgI가 형성되는 것을 확인했다. LiF와 SnO₂ 버퍼 도입 시 이온이동 억제 효과를 통해 페로브스카이트 태양전지의 열안정성이 향상되었다. LiF버퍼층 적용 및 봉지를 한 소자는 85℃-85%RH damp heat 시험 200시간 후 효율감소가 발생하지 않았으며 추가로 AM 1.5G-1SUN 하에서 최대출력점을 추적하였을 때 200시간 후 초기 효율의 90% 이상 유지하는 것을 확인했다. 이 결과는 버퍼층 형성을 통한 층간 물질이동 억제가 장기안정성을 확보하기 위한 필요조건임을 보여준다.

• Current Photovoltaic Research
• /
• 제5권2호
• /
• pp.47-54
• /
• 2017

We report finding ways to improve the long-term reliability of PV module including the heterostructure with the intrinsic thin layer (HIT) solar cell. We point out the stability of the products of Panasonic HIT cell. We account for a brief description of the module manufacturing process to investigate the issues of each process and analyze the causes. We carried out the silicon PV module of the glass to glass type under the damp heat test around 1000 hours. However, it degraded around 7% of PV module power after 300 hours exposure in comparison with the initial status (Initial: 12.7 Watt). We investigated possible cause and solutions for the module performance to develop the long-term reliability.

• 한국태양에너지학회 논문집
• /
• 제37권2호
• /
• pp.77-85
• /
• 2017

Thin crystalline silicon (C-Si) solar cell is expected to be a low price energy source by decreasing the consumption of Si. However, thin c-Si solar cell entails the bowing and crack issues in high temperature manufacturing process. Thus, the conventional tabbing process, based on high temperature soldering (> $250^{\circ}C$), has difficulties for applying to thin c-Si solar cell modules. In this paper, a conductive paste (CP) based interconnection process has been proposed to fabricate thin c-Si solar cell modules with high production yield, instead of existing soldering materials. To optimize the process condition for CP based interconnection, we compared the performance and stability of modules fabricated under various lamination temperature (120, 150, and $175^{\circ}C$). The power from CP based module is similar to that with conventional tabbing process, as modules are fabricated. However, the output of CP based module laminated at $120^{\circ}C$ decreases significantly (14.1% for Damp heat and 6.1% for thermal cycle) in harsh condition, while the output drops only in 3% in the samples process at $150^{\circ}C$, $175^{\circ}C$. The peel test indicates that the unstable performance of sample laminated at $120^{\circ}C$ is attributed to weak adhesion strength (1.7 N) between cell and ribbon compared to other cases (2.7 N). As a result, optimized lamination temperature for CP based module process is $150^{\circ}C$, considering stability and energy consumption during the fabrication.