• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.430-434
• /
• 2004

Specifically designed mandrel is needed to expand tube of the heat exchanger with inner grooves. Configuration of the expanded tube depends upon the shape and feeding velocity of the mandrel. 3D simulation software LS-DYNA was used to obtain optimum design conditions of the mandrel. We show how configuration of the expanded tube varies with different design parameters such as the approaching angle, diameter , and the feeding velocity of the mandrel. Material property data for analysis were obtained through experiments with SHPB ( Split Hopkinson Pressure Bars ).

• 화약ㆍ발파
• /
• 제33권1호
• /
• pp.13-20
• /
• 2015

지하공간의 개발 또는 활용기술에 대한 수요가 전 세계적으로 급증함에 따라, 역학적 안정성과 활용 효율의 측면에서 발파굴착 시 발생하는 손상대 평가는 주요 관심사가 되고 있다. 본 연구에서는 PFC3D와 ANSYS LS-DYNA를 이용하여 판재시료를 대상으로 발파 예정선 주위의 소규모 모형발파에 대한 수치해석을 수행하였다. 또한, 해석 결과의 검증을 위하여 소규모 판재모형을 제작하여 발파실험을 수행하고 균열 전파양상을 비교 고찰하였다.

• 한국도로학회지:도로
• /
• 제15권1호
• /
• pp.14-20
• /
• 2013

• 동력기계공학회지
• /
• 제13권3호
• /
• pp.53-58
• /
• 2009

The importance of cost reduction has grown bigger to ensure the competetive power of products in the electric home appliances industry. Thus, it is necessary to assess the reliability due to drop-impact happenning in process of distribution of microwave ovens with the panel and cavity of thinner thickness for cost reduction. In the present study, the drop/impact simulation using the explicit code LS-DYNA3D has been carried out for improving the impact resistance of a microwave oven. This CAE-based design approach can be successfully applied to enhance the deteriorated dynamic behavior under the impact conditions of dropping height 70cm according to ISTA procedure 2A.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.19-28
• /
• 2014

PURPOSES : This paper evaluates, using LS/DYNA-3D software, the vehicle impact performance of flexible barriers made of steel W-Beam supported by four different types of post configurations. These types include circular post, H-shape post, C-shape post, and square post. METHODS : The post-soil interaction has been investigated according to different impact angles. For this purpose, energy absorption, maximum displacements of post and rail, and occupant risk index of THIV have been compared each other. The three dimensional soil material model, instead of the conventional spring model based on Winkler and p-y curve, has been used to increase the correctness of computational model. RESULTS : It is noted the crash energy absorption has been increased with respect to the increase of impact angle. CONCLUSIONS : In particular, a post with open section(H-shape, C-shape) shows the greater crash energy absorption capability as compared with a post with closed section under the same level of impact conditions.

• 한국항해항만학회지
• /
• 제31권3호
• /
• pp.213-221
• /
• 2007

최근의 선박은 설계 단계부터 그 수명을 다할 때 까지 여러 가지 환경적인 측면이 중요하게 고려되어 제작되고 있다. 이 중 유조선의 좌초충돌에 의한 기름 유출사고는 심각한 해양오염의 일으키는 주요한 원인이 된다. 따라서 본 논문에서는 선박의 층돌해석코드를 이용한 시뮬레이션을 수행하여 선박이 어떠한 손상을 입게 되는지 알아보고자 하였다. 이를 위해서 105k 탱커모델을 구성하고 일련의 시리즈해석을 LS-Dyna3D로 해석을 수행하였다. 연구수행은 먼저, 요소크기의 수렴성을 확인하여 요소크기를 결정하였고, 좌초시나리오를 구성하여 해석한 후, 결과를 분석하여 나타내었다.

• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.825-831
• /
• 1996

폭약의 폭발시 발생되는 초고압 충격 에너지를 이용한 강-티타늄 이종재질의 폭발접합 특성을 한요소기법에 의하여 실험적인 방법으로는 해석하기 어려운 미시적 관점의 접합조건을 해석하였다. 서로 다른 이종재질간의 접합에서 HI-DYNA2D 유한요소 코드를 이용한 계산결과에 의하면 충돌부근에서의 압력크기는 기존에 수행하였던 Oberg등의 수치적 해석결과와 잘 일치하고 있다. 한편, 폭약이 정상적인 폭발에너지를 발생시키기 위해서는 폭약이 30mm이상의 두께를 유지하여야 하며 50mm이상의 폭약두께는 폭접소재의 접합에 별다른 영향을 주지 못하고 있다. 즉, 폭약을 적게 사용하면 접합에너지가 부족하여 접합이 약하고, 폭약이 과도하게 많게되면 폭약의 손실이 많이 되므로 폭발용접 설계시 이들의 양을 미리 명확하게 예측하는 것이 대단히 중요함을 제시하였다. 한 평행한 상태에서 강-티타늄 이중소재를 접합할 경우의 이격거리는 3-5mm로 유지하는 것이 가장 양호한 접합상태를 얻을 수 있는 것으로 해석된다. 본 연구에서는 폭발용접의 접합특성 해석과 이에 강-티타늄 이종재질의 접합 설계조건을 실험적인 방법으로 구하지 않고, HI-DYNA2D 코드를 활용한 반복작업을 통하여 접합조건의 설계데이터를 충분히 얻을 수 있음을 확인하였다.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.113-124
• /
• 2012

PURPOSES : In This study two different concrete barrier systems have been proposed to be established at the small vehicle driveway. One is for median barrier, and the other is for roadside barrier. METHODS : In order to determine the suitable shape of barrier, the impact parameters including vehicle weight, impact angle, impact velocity and impact level have been analyzed. The real crash test has been carried out with 0.9 ton and 2.5 ton vehicles, respectively by using the 2m segment type concrete barriers connected by steel plates that are totally 40m barrier systems. RESULTS : The numerical results obtained by LS/DYNA-3D software are compared with real crash tests from the viewpoints of vehicle stability, vehicle trajectory, occupant risk, etc. CONCLUSIONS : From the above results, the dynamic performance of proposed barrier systems satisfies the specification of Korean Code for roadside safety structures.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.195-201
• /
• 1999

In Rollover crashes, the development of bus structure to ensure the maintenance of survival space for passengers is very important . So, this paper focuses on understanding the possibility of efficient structural development considering rollover strength through computer simulation using the commercial code, LS-DYNA3D at the initial stage of vehicle development structural members, and impact boundary conditions required by ADR59(Australian Design Rule 59)were applied. In order to confirm the validity of the computational results, the test results. After the usefulness of this method of analysis was confirmed , we have proposed the effective modificationfor rollover strength.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.598-604
• /
• 2011

In guard rail crashes, the development of guard rail structure to ensure the maintenance of safety for passengers is very important. So, this paper focuses on understanding the possibility of efficient structural development considering crash strength of guard rail through computer simulation using the commercial code, LS-DYNA3D at the initial stage of guard rail development. For this study, guard rail structure was modeled using shell elements to represent major structural members and passenger car was modeled using plate elements of simple shape to do not have the drawing, and impact boundary conditions required by regulation was applied. In order to confirm the validity of the computational results, they were compared with the test results.