• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1295-1300
• /
• 2001

This paper presents the system that decreases the Jitter value having an important effect for signal quality in optical disc memory. Level controller of input signal was made and applied to line between format generator and laser beam recorder of DVD. This try means to decrease jitter value without adjustment for many kinds of mastering process. Experimental results show that the jitter value is about 6.9%.

• Journal of Korean Electronics
• /
• v.24 no.4
• /
• pp.6-7
• /
• 2004

TV의 평면화가 세계시장으로 진행된다. PDP TV, LCD TV는 2004년 AV의 경쟁시장을 이끌어 가는데 불가피한 품목이다. '테이프에서 디스크로'-DVD레코더의 성장도 2004년 성장의 열쇠가 될 것이다. DSC(디지털스틸카메라)는 계속 순조로운 성장이 기대되는 일본유럽 미국에서 널리 세계에 보급될 것으로 예측되고 있다. 주요 7품목을 간략히 소개한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1166-1171
• /
• 2001

The method for output disturbance estimation is proposed. In this method, output disturbance is estimated from the closed loop system dynamics using the output and control input signals. In the closed-loop output-disturbance estimator, precise system identification is required to reduce estimation error. The realization of estimator was done by the DSP board (DSPl103), and disturbance estimation in various environments was performed： change of rotation speed, media feature and spindle motor with (or without) auto-ball balancing system (ABS). From these experiments, the disturbance characteristics of ODD under various conditions are analyzed, and the desirable servo loop configuration based these results is proposed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.6 s.123
• /
• pp.477-483
• /
• 2007

Major noise source in high speed rotating optical disk drives (CD and DVD-ROM) arises due to the high-speed airflow produced from the upper and lower surfaces on the rotating disk. The present paper deals with the experimental approach how to identify the noise source based on the fundamental principles of aeroacoustics and to propose a reduction method of the noise source. The CD-ROM device is composed of disk, window tray, motors at the bottom place and electronic circuit plate also located below the window plate. The window is cut in the tray to read the disk information using the optical device located below the tray and moving linearly from the center of the disk through the end of the disk. All components are possible noise generators. Experimental studies were carried out in the anechoic room with various design modifications, such as tray geometry, window size and hole location on tray, to identify the major aerodynamic noise source and significant reductions of the aerodynamic noise were obtained.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.135-143
• /
• 1998

Several equalizers are applied to the DVD-ROM(Digital Versatile Disc-Read Only Memory) system. Because imperfect writing process may cause nonlinear distortion in the reply signal, neural equalizers which have strong nonlinear mapping capability are applied to the system to compensate the nonlinear distortion. Experimental results to verify that the combination of decision-feedback type equalizers and modulation code is formidable are also given. The experimental results shwo that the SNR gain of the neural equalizers over the conventional equalizers becomes much as the nonlinearity in the channel increases. Furthermore, the decision-feedback type equalizers outperform the equalizers which have no decision-feedback in eliminating ISI(Intersymbol Interference) of random data sequence but there is no performance gain of the decision-feedback type equalizers over the equalizers without decision-feedback when these are applied to compensate the ISI of modulation-encoded data sequence.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.2
• /
• pp.135-142
• /
• 2008

Experimental studies on the aerodynamic coupling effect on natural frequencies, critical speed and flutter instability of rotating disks are investigated in this paper. The theoretical analysis uses a fluid-structure model where the aerodynamic effects are represented in terms of elastic, lift and damping and stiffness components. The experiments performed using a vacuum chamber and ASMO/DVD disks rotating in vacuum, open and enclosure in several gaps with stationary wall give three main results. One is that the aerodynamic effect by the surrounding air reduces the natural frequencies and critical speeds of the vibration modes. The second is that natural frequency of disks rotating in open air is larger than that in enclosure. Finally, it is shown that the disk vibration is reduced as the gap between the disk and the rigid wall decreases.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.867-870
• /
• 2002

In high-speed optical disk drive, the excitation caused by rotation of a mass-unbalanced disk is a major source of vibration. The vibration can be a disturbance to the servo system, which is sufficient to cause severe failures in the reading and writing process. The vibration also causes users to feel unpleasantness. The vibration reduction is therefore essential for the reliable operation of optical disk drive. One of the approaches to reduce the vibration is a dynamic vibration absorber (DVA). In this paper, we analyze the dynamic behavior of $DVD\pmRW$ combo drive system with DVA through 12_dof rigid multi-body dynamic model. The effective location and the optimal frequency ratio are obtained from the analysis.

• Journal of Korea Multimedia Society
• /
• v.5 no.2
• /
• pp.215-221
• /
• 2002

In high speed optical disc devices, the vibration caused by unbalanced displacement leads the focus and tracking servo systems to be unstable, and increases the data search time. In this paper, we propose a new scheme to solve the unbalanced displacement problem. The proposed method detects the unbalanced rate by differential amplifying optical power received at photo diode and converts it into an electrical signal. controlling the speed of spindle motor, according to the detected unbalanced rate, makes it possible to improve the performance of tracking and data searching tasks. Also, we analyze the dynamic characteristics of focus and tracking servo systems in high speed mode and provide the firmware and hardware architecture that the proposed method can be installed as an add-on- module in the existing system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.90-96
• /
• 2008

Recently, various recording technologies are studied for optical data storage. After standardization of BD (Blu-ray Disc) and HD-DVD (High-Definition Digital Versatile Disc), the industry is looking for a suitable technology for next generation optical data storage. Super-RENS (Super-Resolution Near Field Structure) technique, which is capable of compatibility with other systems, is one of next optical data storage. In this paper, we proposed a neural network-based nonlinear equalizer (NNEQ) for Super-RENS discs. To mitigate the nonlinear ISI (Inter-Symbol Interference), we applied NARX (Nonlinear AutoRegressive eXogenous) which is a kind of neural networks. Its validity is tested with the RF signal samples obtained from a Super-RENS disc. The performance of the proposed equalizer is superior to the one without equalization and that of the Limit-EQ in terms of BER (Bit Error Rate).

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.1009-1012
• /
• 1999

Recently, there is a strong need of DVD (Digital Versatile Disk) system of high density. high speed, and high accuracy System performances mostly depend on not only optical system, but also servo technology to drive it. Therefore, we investigate main technology concerned with optical pick-up unit based on 4.7GB DVD-RAM and analyzes technology of optical and servo systems that are required for high density high speed and high accuracy from the viewpoint of control. And then, we design a linear controller based on specification of 4.7GB DVD-RAM that is commercially available now. We analyze the dynamic characteristics of optical system that is coupled with control system and verify effect on performance indices of servo due to Parameter variation of pick-up by simulation. Finally, we will propose controller design specifications and provide direction of technical development for servo system and problems coupled with high capacity for 15GB level in the future.