• Korean Journal of Microbiology
• /
• v.42 no.3
• /
• pp.205-209
• /
• 2006

For measuring the viable cells in lakes, quantitative direct viable count (qDVC) method is applied. In the qDVC process, the final concentration of glycine is fixed as 2%. For confirming the effectiveness of qDVC for enumerating the viable cells, the viable bacterial numbers were measured by plate count, CTC reduction method and qDVC method at 5 different lakes. Among these 3 methods, the bacterial numbers by qDVC is $2.4{\sim}6.0$ times higher than those by the other 2 methods. And by the qDVC method, the viable cells were easily discriminated from dead or dormant cells.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9C
• /
• pp.564-572
• /
• 2011

Distributed video coding (DVC) system has been proposed to reduce encoder complexity by using the correlation of frames in decoders. Since the block based motion estimation operation is not performed in the encoder of DVC system, lapped transforms, in which adjacent two blocks are transformed into one block, can be efficiently used in the DVC system. In this paper, an efficient DVC system using lapped transforms is proposed. The overlapped block motion compensated interpolation is used to produce side information, and the corresponding correlation noise between original Wyner-Ziv frame and side information is modeled. Extensive computer simulations show that the proposed DVC system outperforms conventional DVC systems.

• Korean Journal of Microbiology
• /
• v.39 no.3
• /
• pp.181-186
• /
• 2003

This study was performed to analyze quantitatively the number of living bacteria in forest soil samples collected from Mt. Keryong using improved direct viable count (DVC) and plate count (PC) methods. The number of living bacteria by DVC comprised 18～44% of the total direct count (TDC), whereas the number of living bacteria by PC was less than 1% of TDC. These results showed that viable but non-culturable (VBNC) bacteria existed in the soil with high percentages. Besides, DVC was proved to make it possible to make a quantitative detection of the VBNC bacteria. On the other hand, upon measuring the value from the conventional nutrient broth (NB) and $10^{-2}$ folded diluted nutrient broth (DNB), the values from the DNB showed 5 to 10 times higher than those from the conventional NB medium. These results indicate that oligotrophic bacterial groups, which could multiply in the low nutrient broth, abundantly exist in the soil ecosystem. It would also be possible to apply this kind of method to other substrate to make a quantitative detection of soil bacterial groups.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1309-1310
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1249-1250
• /
• 2011

• Coupled systems mechanics
• /
• v.11 no.1
• /
• pp.15-32
• /
• 2022

The comprehensive understanding of the fiber reinforced polymer behavior requires the use of advanced non-destructive testing methods due to its heterogeneous microstructure and anisotropic mechanical proprieties. In addition, the material response under load is strongly associated with manufacturing defects (e.g., voids, inclusions, fiber misalignment, debonds, improper cure and delamination). Such imperfections and microstructures induce various damage mechanisms arising at different scales before macrocracks are formed. The origin of damage phenomena can only be fully understood with the access to underlying microstructural features. This makes X-ray Computed Tomography an appropriate imaging tool to capture changes in the bulk of fibrous materials. Moreover, Digital Volume Correlation (DVC) can be used to measure kinematic fields induced by various loading histories. The correlation technique relies on image contrast induced by microstructures. Fibrous composites can be reinforced by different fiber architectures that may lead to poor natural contrast. Hence, a priori analyses need to be performed to assess the corresponding DVC measurement uncertainties. This study aimed to evaluate measurement resolutions of global and regularized DVC for glass fiber reinforced polymers with different fiber architectures. The measurement uncertainties were evaluated with respect to element size and regularization lengths. Even though FE-based DVC could not reach the recommended displacement uncertainty with low spatial resolution, regularized DVC enabled for the use of fine meshes when applying appropriate regularization.

• Coupled systems mechanics
• /
• v.12 no.6
• /
• pp.503-517
• /
• 2023

Standard Digital Volume Correlation (DVC) approaches are based on pattern matching between two reconstructed volumes acquired at different stages. Such frameworks are limited by the number of scans (due to acquisition duration), and time-dependent phenomena can generally not be captured. Projection-based Digital Volume Correlation (P-DVC) measures displacement fields from series of 2D radiographs acquired at different angles and loadings, thus resulting in richer temporal sampling (compared to standard DVC). The sought displacement field is decomposed over a basis of separated variables, namely, temporal and spatial modes. This study utilizes an alternative route in which spatial modes are con-structed via scan-wise DVC, and thus only the temporal amplitudes are sought via P-DVC. This meth-od is applied to a glass fiber mat reinforced polymer specimen containing a machined notch, subjected to in-situ cyclic tension, and imaged via X-Ray Computed Tomography. Different temporal interpolations are exploited. It is shown that utilizing only one DVC displacement field (as spatial mode) was sufficient to properly capture the complex kinematics up to specimen failure.

• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.179-190
• /
• 2012

In Distributed Video Coding(DVC), a low complexity encoder can be realized by shifting complex processes of encoder such as motion estimation to decoder. Since not only motion estimation/compensation processes but also channel decoding process needs to be performed at DVC decoder, the complexity of a decoder is significantly increased in consequence. Therefore, various fast channel decoding methods are proposed for the most computationally complex part, which is the channel decoding process in DVC decoding. As the channel decoding process becomes faster using various methods, however, the complexity of the other processes are relatively highlighted. For instance, the complexity of side information generation process in the DVC decoder is relatively increased. In this paper, therefore, a fast method for the DVC decoding is proposed by using adaptive search range method in side information generation process. Experimental results show that the proposed method achieves time saving of about 63% in side information generation process, while its rate distortion performance is degraded only by about 0.17% in BDBR.

• The Korean Journal of Applied Statistics
• /
• v.34 no.3
• /
• pp.449-460
• /
• 2021

ASVspoof 2017 deals with detection of replay attacks and aims to classify real human voices and fake voices. The spoofed voice refers to the voice that reproduces the original voice by different types of microphones and speakers. data augmentation research on image data has been actively conducted, and several studies have been conducted to attempt data augmentation on voice. However, there are not many attempts to augment data for voice replay attacks, so this paper explores how audio modification through data augmentation techniques affects the detection of replay attacks. A total of 7 data augmentation techniques were applied, and among them, dynamic value change (DVC) and pitch techniques helped improve performance. DVC and pitch showed an improvement of about 8% of the base model EER, and DVC in particular showed noticeable improvement in accuracy in some environments among 57 replay configurations. The greatest increase was achieved in RC53, and DVC led to an approximately 45% improvement in base model accuracy. The high-end recording and playback devices that were previously difficult to detect were well identified. Based on this study, we found that the DVC and pitch data augmentation techniques are helpful in improving performance in the voice spoofing detection problem.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.20-28
• /
• 2012

DVC(Distributed Video Coding) technique is a new paradigm, which is based on the Slepian-Wolf and Wyner-Ziv theorems. DVC offers not only flexible partitioning of the complexity between the encoder and decoder, but also robustness to channel errors due to intrinsic joint source-channel coding. Many conventional research works have been focused on the light video encoder and its rate-distortion performance improvement. However, in this paper, we propose a new DVC codec which is effectively applicable for error-prone environment. The proposed method adopts a quantiser without dead-zone and symmetric Gray code around zero value. Through computer simulations, the proposed method is evaluated by the bit errors position as well as the number of burst bit errors. Additionally, it is shown that the maximum and minimum transmission rate for the given application can be linearly determined by the number of bit errors.