• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.820-822
• /
• 2005

We have designed a 32-bit microprocessor with fixed point digital signal processing functionality. This processor, combines both general-purpose microprocessor and digital signal processor functionality using the reduced instruction set computer design principles. It has functional units for arithmetic operation, digital signal processing and memory access. They operate in parallel in order to remove stall cycles after DSP or load/store instructions, which usually need one or more issue latency cycles in addition to the first issue cycle. High performance was achieved with these parallel functional units while adopting a sophisticated five-stage pipeline stucture.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1316-1319
• /
• 1996

This paper proposes the algorithm for the correction of a position and orientation of small object such as chip in the precise construction process. In the past, it is general to correct position and orientation of object using human sight and simple vision sensors. But recently, researches using image processing devices have been studied to improve the corrective precision of a position and orientation of object. In this piper, maximum-axis moment and p-theta algorithm are used to correct the position and orientation. Algorithm of maximum-axis moment is widely applied to hetero-object except being applied to a perfect rectangle. This is reason that moments of the X and Y-axis are equal. Therefore, being the shape of a perfect rectangle, the object is applied to other algorithm. In the light of time problem, real-time control is as important as correction of object. To solve it, we use the DSP(Digital Signal Processing) which is far more fast than PC.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.3
• /
• pp.47-52
• /
• 1999

The efficiency of an adder which plays an important role in micro-process and DSP greatly depends on the kinds of carry generation method. So in this paper. I used both CLA excellent in the speed and CSA best in the chip-size. The 64bit adder is designed with high speed which is two optimum combination. Therefore this paper suggested the way of CLSA improving both speed and chip-size. and proved the excellence of the designed circuit.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.2
• /
• pp.110-118
• /
• 1997

This paper describes the dissipation factor measuring techniques of insulating oil on operating pole transformers by using digital signal processor. After applying voltage to the condenser which is in¬stalled in a transformer, acquiring source voltage and current of condenser and using cross-correla¬tion techniques, we can check the dissipation factor of insulating oil. To improve measuring accuracy and the speed of process, we use hardware such as TMS320C31 DSP board and software such as cross -correlation techniques. We simulated the measuring accuracy and the degree of the noise effect of this new measuring techniques by using computer simulation, and compared the simplified measuring devices with Schering bridge on degraded insulating oil. The result showed that this measuring tech¬nique can be used as diagnostic method on the pole transformers.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.462-463
• /
• 1996

This study describes the dissipation factor measuring techniques of insulating oil on the operating, transformer by using digital signal processing. After applying voltage to the sensor which is installed in a transformer, acquiring source voltage and current of sensor and using cross-correlation techniques, we can check the dissipation factor of insulating oil. To improve measuring accuracy and the speed of process, we use hardware such as TMS320C31 DSP board and analog filter and software such as fast cross-correlation techniques, rectangular window, and digital filtering techniques. We simulated the measuring accuracy and the degree of the noise effect of this new measuring techniques by computer simulation, and compared the simplified measuring devices with Schering Bridge on degraded insulating oil. The result showed that this measuring technique can be used as diagnostic method on the pole transformers.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.517-519
• /
• 2005

In this paper, we consider a digital protection IED(Intelligent Electric Device) for a distributed power system. The IED can measure various elements for protection and communicate with another devices through network. The protection IED is composed of specific function modules: signal process module which converts analog signal from PT and CT handle algorithm to digital one; communication module for connection with another IEDs; input/output module for user-interfaces. A general purpose DSP board with TMS320C2812 is used in the IED. In order to verify the proposed IED, experimental researches with the power system simulator DOBLE has been carried out for a phase earth fault. The results show an under-voltage relaying algorithm has been realized sucessfully in the hardware system.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.71-78
• /
• 2008

Nowadays, echosouder has been widely used in sea survey and ship navigation. By utilizing echosounder, we can measure the depth of water reliability. However, the problem is that depth update rate drops remarkably when sea bottom is shallow or steep/rugged. Therefore, we have developed an optimized algorithm to process tranducer's soundwave signals at high-speed and minimize error. Processing algorithm is implemented by the latest DSP processor (TMS320F2812), consequently, high-speed data processing can be achieved. Performance of the proposed algorithm is verified by experiments and compared with existing algorithms. It has shown that our method results in higher precision in water depth measurement than other methods.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1383-1388
• /
• 2015

Proportional integral derivative (PID) control is one of the conventional control strategies. Industrial PID control has many options, tools, and parameters for dealing with the wide spectrum of difficulties and opportunities in manufacturing plants. It has a simple control structure that is easy to understand and relatively easy to tune. Injection mold is warming up to the idea of cycling the tool surface temperature during the molding cycle rather than keeping it constant. This “heating and cooling” process has rapidly gained popularity abroad. However, it has discovered that raising the mold wall temperature above the resin’s glass-transition or crystalline melting temperature during the filling stage is followed by rapid cooling and improved product performance in applications from automotive to packaging to optics. In previous studies, optimization methods were mainly selected on the basis of the subjective experience. Appropriate techniques are necessary to optimize the cooling channels for the injection mold. In this study, a digital signal processor (DSP)-based PID control system is applied to injection molding machines. The main aim of this study is to optimize the control of the proposed structure, including a digital PID control method with a DSP chip in the injection molding machine.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.147-155
• /
• 1989

In this paper, a real-time implementation of the TWS(track-while-scan) system using the high-speed DSP (digital signal processor) TMS320C25 is described. First, attempts have been made to investigate the FWL (finite word length) effect, which is caused by employing a fixed point arithmetic, of implementing the Kalman filter. The real-time TWS system consists of TWS arithmetic unit, scan converter, and system controller. In addition, the TWS system is in tegrated in the Multi-Bus. In experiment, it is observed that by employing the floating point arithmetic the computation time of 0.35sec is required for tracking 8 targets simultaneously, while 0.28sec is required for the fixed point arithmetic. Since the TWS system is designed to track up to 8 targets simultaneously, we conclude that the system is enough to process Kalman filter in a real-time.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1757-1762
• /
• 2003

With distribution industrial control system, the use of low cost to achieve a highly reliable and safe system in real time distributed embedded application is proposed. This developed intelligent node is based on two microcontrollers, one for the execution of the application code, also as master controller for ensuring the real time control & the logic operation with PLD and other for communication task and the easy control execution, i.e., I/O digital input, digital output and interrupting. This paper also presents where the case NCS (Networked control system) with LonTalk protocol is applied for the filtration process control system of a small water treatment plant.