• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.686-690
• /
• 2003

직접 확산 부호 분할 다원 접속 (Direct Sequence Code Division Multiple Access : DS-CDMA) 시스템과 시분할 다원 접속 (Time Division Multiple Access : TDMA) 시스템을 동일 주파수 대역에서 중첩되어 전송할 때 DS-CDMA 신호에서의 TDMA 신호의 협대역 간섭이 문제된다. 본 논문에서는 DS-CDMA 신호의 협대역 간섭(narrowband interference : NI)를 제거하는 방법으로서 노치필터를 이용해서 협대역 간섭파 제거법을 제안하고, 간섭제거기(CCI canceller)를 이용해서 다중접속간섭을 제거하여 DS-CDMA 신호의 성능을 개선한다. 본 논문은 잡음, 다중접속 간섭 및 협대역 간섭환경에서 DS-CDMA 신호와 TDMA 신호의 주파수 공용 시스템에 적용할 때의 성능을 분석하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1073-1080
• /
• 2005

In spite of many advantages of Meteor Burst Communications(MBC) on its transmission channel, the fact that its duty rate is less than 10 percents is a considerable deficiency of MBC. To overcome with this deficiency without paying large cost, we use a direct sequence(DS) simple reception system. This method doesn't need to add the components for acquisition or tracking the signal so that it keeps the cost efficiency of the MBC. But it has a disadvantage that its duty rate shows a large decline by noise. For this problem, we adopt the proposed system applying a positive feedback circuit. The improvement by this method is more significant when the received signal is weak. Simulation results show as tl is l00ms, then the burst length would be increased by $35\%$ when the initial value of the received signal power increases by 3 dB, t2 is 135ms. If the power increases by 6dB the burst length would be 170ms thus increased by $70\%$, which shows a great enhancement. Suppose now that tl is 50ms and the power is increased by 3dB, then t2 would be increased by $70\%$ to 85ms, and increasing the power by 6dB it would be increased by $130\%$ to 115ms.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.404-404
• /
• 2004

• 전자공학회논문지 IE
• /
• v.43 no.2
• /
• pp.70-74
• /
• 2006

The performance of conventional direct sequence code division multiple access (DS-CDMA) systems is decreased under environments such as additive white Gaussian noise (AWGN), channel distortion and interference noise due to multiple access user. By means of this parameter, auto correlation value of pseudo noise spreading sequence is decreased at receiver. This techniques which are based on correlation of between signature waveform signal. In this paper, to improve correlation property, we proposed the binary chirp DS-CDMA techniques which combine the DS-CDMA and chirp modulation. The proposed system which is based on binary chirp symbol has a good correlation value. Thus, we called BC DS-CDMA. To evaluate the system's performance, we compare the performance of the proposed systems with DS-CDMA systems under AWGN channel and halogen noise which exists on the powerline. The simulation results show that the proposed method has better performance than conventional technique.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.44-54
• /
• 1996

In DS/SS systems it is necessary to synchronize the locally generated despreading signal with the received spreading signal to demodulate the received signal. The synch process between the two signals is usually accomplished in two steps : first acquisition then tracking. In this paper, an acquisition system aided by the neural network is proposed for the rapid and exact acquisition in DS/SS. the neural netowrk is composed o fthree-layered perpecptrons and trained by the backpropagation algorithm. The performance of the proposed system is analyzed and compared with ones of conventional systems using the sequential estimation technique under an additive while gaussian noisy channel. In all of th econsidered simulations, the proposed system outperforms conventional systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10B
• /
• pp.1714-1721
• /
• 2000

In the mobile communication using DS-CDMA systems the problem of multiple user interference which reduce the performance is generated by multiple user access. In this paper to solve this problem we proposed the direct decision blind adaptive receiver with knowledge of only the desired user's spreading sequence. Simulation result present that the total user's power has equal gain The gain of signal to interference ratio for the proposed blind DD-LMS receiver has about 6[dB] than conventional receiver at additive white Gaussian noise and large gain at multipath channels. And when interference user's power has more large gain than desired user's power the gain of SIR for the proposed receiver has large value. And simulation result of bit error rate present that DD-LMS receiver has higher performance than LCCMA receiver. Thus the proposed blind DD-LMS receiver has robustness against interference of high power user and multipath channels.

• Korean Journal of Optics and Photonics
• /
• v.27 no.4
• /
• pp.133-142
• /
• 2016

This paper presents the design and simulation of a three-dimensional pixel-by-pixel scanning light detection and ranging (LIDAR) system with a microelectromechanical system (MEMS) scanning mirror and direct sequence optical code division multiple access (DS-OCDMA) techniques. It measures a frame with $848{\times}480$ pixels at a refresh rate of 60 fps. The emitted laser pulse waves of each pixel are coded with DS-OCDMA techniques. The coded laser pulse waves include the pixel's position in the frame, and a checksum. The LIDAR emits the coded laser pulse waves periodically, without idle listening time to receive returning light at the receiver. The MEMS scanning mirror is used to deflect and steer the coded laser pulse waves to a specific target point. When all the pixels in a frame have been processed, the travel time is used by the pixel-by-pixel scanning LIDAR to generate point cloud data as the measured result.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5C
• /
• pp.555-560
• /
• 2003

For synchronous direct sequence-code division multiple access (DS-CDMA) systems, the authors propose an adaptive radial basis function (RBF) receiver with suboptimal structure that reduces not only the complexity with regard to the number of centers but also the quantity of instructions required per one bit reception. The proposed receiver is constructed with parallel RBF networks. Each RBF network has the same procedure as the conventional RBF receiver. The performance of each RBF network is affected by interferences which are assigned to the other RBF networks because neither RBF network uses the full user set. To combat these interferences, the partial IC technique is employed. Monte Carlo simulations over additive white Gaussian noise (AWGN) channels confirm that the proposed receiver with its reduced complexity is able to obtain near-optimum performance. Moreover, the proposed receiver is able to properly cope with a various environment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.160-164
• /
• 2004

In DS/CDMA(direct sequence code division multiple access) system using the approximated analytic chip waveforms are applied. Proposed chip waveforms are classified into 2 types: uniform chip waveforms with uniform envelope and non-uniform chip waveforms with non-uniform envelope. It has confirmed that the similarity of the approximated analytical chip waveforms is compared using chip waveforms, envelope, phase, correlation, and bandwidth properties.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.98-101
• /
• 1998

The intermodulation distortion(IMD) due to laser diode nonlinearity of an asynhcronous direct sequence code diviion multiple access(DS/CDMA) system in wireless-optical transmission system model is analzed. A third order polynomial is used to represent laser diode nonlinearity. In DS/CDMA system, only one harmonic of the third-order intermodulation term falls on the signal frequency band and influences the system performance characteristics. To cancel multi-user interference and nonlinear distortion in a DS/CDMA wireless-optical transmission system model, the simple transversal filter structure with N-taps of (N-1) tap delay of 1 chip time delay line is used. It is necessary to select an optimal modulation index that provides a maximum signal-to-noise ratio and the results are useful for CDMA system design.