• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.547-557
• /
• 2018

This work proposes a control method of frequency stabilization for grid integration of large-scale wind farms via the voltage source converter-based high-voltage direct current (VSC-HVDC) technology. First, the topology of grid integration of a large-scale wind farm via the VSC-HVDC link is provided, and simple control strategies for wind turbines, wind farm side VSC (WFVSC), and grid side VSC are presented. Second, a mathematical model between the phase angle of WFVSC and the frequency of the wind farm is established. The control principle of the large-scale wind power integrated system is analyzed in theory in accordance with the mathematical model. Third, frequency and AC voltage controllers of WFVSC are designed based on the mathematical model of the relationships between the phase angle of WFVSC and the frequency of the wind farm, and between the modulation index of WFVSC and the voltage of the wind farm. Corresponding controller structures are established by deriving a transfer function, and an optimization method for selecting the parameters of the frequency controller is presented. Finally, a case study is performed under different operating conditions by using the DIgSILENT/PowerFactory software. Results show that the proposed control method has good performance in the frequency stabilization of the large-scale wind power integrated system via the VSC-HVDC technology.

• Journal of Digital Convergence
• /
• v.12 no.7
• /
• pp.85-93
• /
• 2014

The Press related Energy including nuclear energy has social responsibility that it should pass the scientific factors to the right. It is essential to ensure the accuracy and fairness. The general public, such as press releases and information obtained through indirect communication affects social acceptance of nuclear power, which is used to determine the direction of energy policy, the most important factor to be taken into account. Recent rapid increase coverage of NPP lose in balance of nuclear power plants. In this study the qualitative interviews were performed with the workers who stand directly in obtaining information about nuclear related organizations. By E-mail and FGI the data were collected from the workers' perception about domestic nuclear news. They perceived the NPP news that the negative aspects of nuclear power plants were too much dealt in nuclear news coverage, and risk of NPP is only exaggerated and distorted, the lack of expertise knowledge on nuclear power and recognize that the cause was a lack of understanding. 'Nuclear mah' for the event were aware that should dig more thoroughly. The Journal of Digital Policy & Management.

• STI Policy Review
• /
• v.1 no.3
• /
• pp.25-37
• /
• 2010

Advances in Information Communication Technologies (ICT) have demonstrated tremendous potential for solving development challenges and improving development processes, culminating in the new Development 2.0. Many development practitioners have embraced ICT (particularly on Web 2.0 and mobile phone technologies and applications), which have become hot topics in both the development community and the policy community as they engage in development practice and dialogue. Despite this excitement, there lacks among the policy community a robust understanding of the powers and pitfalls of ICT in development, executed actions to back the excited chatter, and dissemination of this understanding to practitioners and policymakers alike. We conducted a literature review, interviewed experts, and engaged in discussion with leaders in international development and science and technology policy to provide an operational framework base in which to view ICT in development. This framework regards ICT as tools that support more effective and efficient community development actions and appropriate consideration of general guidelines, which enable better engagement across and within sectors and individuals. Flexibility and accountability are critical requirements pervading throughout the various actions and guidelines, which promote transparent, partnership-based, and sustainable development. We highlight the strengths and weaknesses of ICT to focus on the cautions to keep ICT access and distribution in context, understand the various levels of technologies and services, and dig below the surface as excitement about ICT increases and threatens to become a short-term solution. We offer ideas for specific programs that policymakers can implement to contribute to a more efficient and effective development process to ultimately support global human development, but stress the endless possibilities that can be explored with creativity and flexibility beyond what is proposed here.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.2
• /
• pp.39-47
• /
• 2003

Cr thin films were deposited on photosensitive polyimide substrates by RF bias sputtering and DC sputtering and the interfaces between Cr thin film and polyimide were observed using TEM. When the polyimide surface was in-situ RF plasma cleaned at the RF power density of 0.13-2.12 $W/cm^2$, increasing of RF power density changed the morphology of polyimide surfaces from round dig to sharp shape, and surface roughness increased by anisotropic etching. The intermixed layer-like interfaces between Cr and polyimide were observed in the RF bias sputtered specimens. This interface seems to be formed due to the RF cleaning effect; the polyimide surface was RF plasma cleaned while RF power was increased to the setting point before Cr deposition.

• Composites Research
• /
• v.15 no.1
• /
• pp.21-31
• /
• 2002

To overcome the disadvantages of conventional excavation technology various trenchless (or excavation free, or no-dig) repair-reinforcement technologies have been developed and tried. But trenchless technologies so far developed have some drawbacks such as high cost and inconvenience of operation. In this study, a repairing-reinforcing process for underground pipes with glass fiber fabric polymer composites using VARTM (Vacuum Assisted Resin Transfer Molding) has been developed. The developed process requires shorter operation time and lower cost with smaller and simpler operating equipments than those of the conventional trenchless technologies. For the reliable operation of the developed method, a simple method to apply pressure and vacuum to the reinforcement was devised and flexible mold technology was tried. Also, resin filling and cure status during RTM process were monitored with a commercial dielectrometry cure monitoring system, LACOMCURE. From the investigation, it has been found that the developed repairing-reinforcing technology with appropriate process variables and on-line cure monitoring has many advantages over conventional methods.

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.71-78
• /
• 2017

Scattered radiation is inherent phenomenon of x-ray, which occurs to the subject (or patient). Therefore it cannot be avoidable but also interacts as serious noise factor because the only meaningful information on x-ray radiography is primary x-ray photons. The purpose of this study was to quantify scattered radiation for various shooting parameters and to verify the effect of anti-scatter grid. We employed beam stopper method to characterize scatter to primary ratio. To evaluate effect on the projection images calculated contrast to noise ratio of given shooting parameters. From the experiments, we identified the scattered radiation increases in thicker patient and smaller air gap. Moreover, scattered radiation degraded contrast to noise ratio of the projection images. We find out that the anti-scatter grid rejected scattered radiation effectively, however there were not fewer than 100% of scatter to primary ratio in some shooting parameters. The results demonstrate that the scattered radiation was serious problem of medical x-ray system, we confirmed that the scattered radiation was not considerable factor of dig ital radiog raphy.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5842-5861
• /
• 2019

A current autonomous vehicle determines its driving strategy by considering only external factors (Pedestrians, road conditions, etc.) without considering the interior condition of the vehicle. To solve the problem, this paper proposes "An Optimal Driving Support Strategy(ODSS) based on an Genetic Algorithm for Autonomous Vehicles" which determines the optimal strategy of an autonomous vehicle by analyzing not only the external factors, but also the internal factors of the vehicle(consumable conditions, RPM levels etc.). The proposed ODSS consists of 4 modules. The first module is a Data Communication Module (DCM) which converts CAN, FlexRay, and HSCAN messages of vehicles into WAVE messages and sends the converted messages to the Cloud and receives the analyzed result from the Cloud using V2X. The second module is a Data Management Module (DMM) that classifies the converted WAVE messages and stores the classified messages in a road state table, a sensor message table, and a vehicle state table. The third module is a Data Analysis Module (DAM) which learns a genetic algorithm using sensor data from vehicles stored in the cloud and determines the optimal driving strategy of an autonomous vehicle. The fourth module is a Data Visualization Module (DVM) which displays the optimal driving strategy and the current driving conditions on a vehicle monitor. This paper compared the DCM with existing vehicle gateways and the DAM with the MLP and RF neural network models to validate the ODSS. In the experiment, the DCM improved a loss rate approximately by 5%, compared with existing vehicle gateways. In addition, because the DAM improved computation time by 40% and 20% separately, compared with the MLP and RF, it determined RPM, speed, steering angle and lane changes faster than them.

• The Journal of the Korea Contents Association
• /
• v.4 no.2
• /
• pp.21-27
• /
• 2004

In an urban area telecommunication using wireless system, the accurate prediction and analysis of wave propagation characteristics are very important to determine the service area optimized selection of base station, and eel design, etc. In the stage of these analyses, we have to present the propagation prediction mood which is varied with the type of antenna, directional angle, and configuration of the ground in our urban area in addition we need to perform an analysis of the conventional mode which is similar to ours and dig out the parameters to evaluate the wave environment before the cell design for the selected area. In this paper, we propose a wave propagation prediction model concerning the topography and obstacles in our urban area. We extract the parameters and apply them to the proposed wave environment for the simulation analyzing the propagation characteristics. Throughout these analyzing procedure, we extracted the essential parameters such as the position of the base station, the height of topography, and adequate type and height of the antenna with our preferable cuteness.

• Archives of Pharmacal Research
• /
• v.23 no.5
• /
• pp.525-530
• /
• 2000

mST3GaIV synthesizes ganglioside GM3, the precursor for simple and complex a- and b- series gangliosides, and the expression and regulation of mST3GaIV (CMP-NeuAc: lactosylceramide $\alpha$2,3-sialyltransferase) activity is central to the production of almost all gangliosides, a class of glycosphingolipids implicated in variety of cellular processes such as transmembrane signaling, synaptic transmission, specialized membrane domain formation and cell-cell interactions. To understand the developmental expression of mST3GaIV in mice, we investigated the spatial and temporal expression of mST3GaIV mRNA during the mouse embryogenesis [embryonic (E) days; 19, E11, E13, E15] by in situ hybridization with digoxigenin-labeled RNA probes. All tissues from 19 and E11 were positive for mST3GaIV mRNA. On E13, mST3GaIV mRNA was expressed in various neural and non-neural tissues. In contrast to these, on E15, the telencephalon and liver produced a strong expression of mST3GaIV which was a quite similar to that of E13. In this stage, mST3GaIV mRNA was also expressed in some non-neural tissues. These data indicate that mST3GaIV is differently expressed at developmental stages of embryo, and this may be importantly related with regulation of organogenesis in mice.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.4
• /
• pp.83-90
• /
• 2014

The aim of this study is to find out the ways of community landscape design in American garden city, Logan in Northern Utah. I had been surveyed historic homes and single units to take a dig how to keep and develope a good community landscape of the city in both the Historic District and residential area, researching of documents. City of Logan surveyed contains a remarkable landscape views of various historical house styles and contemporary single units based on traditional house styles out of central street. For they have been controled by Center Street National Historic District Design Standards and Logan Land Development Code with Logan General Plan. Logan community shows today a particular identity and harmonious landscape of residential area in a view point of old and new buildings. There are three results of the study as follows: First, the types of homes in Historic District are focused on Victorian style with Prairie homes which are unique American style, the Craftman that is revised as American home style, and vernacular style. Second, the historical houses have been controled by HPC since 1978 in order to keep the original buildings and landscape architecture, and the general single units by building code of the city in General Plan. Third, it must be citizen participation design to build up a beautiful landscape that Logan has maintained a safety garden city people hope to live in.