• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.88-93
• /
• 1996

The study was carried out development a pricision positioning apparatus, consisting of DG servo motor and piezoelectric actuatior. This system is composed of fine and coarse apparatus, measurement system and control system. Peezoelectric actuator is designed for fine positioning. Coarse positioning using lead screw is droved by DC servo motor. Control system output a signal from laser interfermeter and capacitive sensor to amplifer of DC servo motor and piezoelectric actuator after digital signal processing (DSP). Resolution of this apparatus measure with laser interferometer and microsense

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.418-421
• /
• 1988

A disturbance and parameter variations cause a steady and/or transient error in the conventional de servo motor drive system. In this paper robust control system for dc servo motor drive taking disturbance and parameter variations into account is proposed. The proposed control system compensates rapidly the state error caused by disturbance and parameter variations. Simulation results show that the proposed method is robust for the steady and transient response in the presence of both disturance and parameter variations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.158-165
• /
• 1991

DC servo motors have small torques compared to their weight. In order to reduce the speed and increase the output torque of the DC motor, a gear box is commonly used. The use of a gearbox, however, imposes limitations onmany applications because of the backlash and the reduction in transmission efficiency. Furthemore, the elastic deformation or the compliance of the gearbox decreases the accuracy of the servo mechanism and the stability of the system. In view of the many disadvantages in using the gearbox, a more effective solution has to be found. The solution is the direct drive mechanism. There are many kinds of direct drive motors. I will consider the ultrasonic motor in particular.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.852-854
• /
• 1995

This paper proposes a new identification method that utilizes fuzzy inference in parameter identification. The prosed system has an additional control loop where a real plant has replaced by a plant model. Fuzzy rules describe the relationship between comparison results of the features and magnitude of modification in the model parameter values. In this paper, the tuning method which determines parameters of PID controller automatically is described through applying this algorithm to DC servo motor. And we intend to investigate effectiveness of the method by experiments. This method is effective in auto-tuning because the response of the closed loop has verified. The simulated and the experimental results of the dc servo motor are shown to confirm the viability of this method.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.261-264
• /
• 1995

A scheme of observer-based MFAC(Model Following Acceleration Control) system is proposed for the DC servo position control system. The proposed system is competed of MFAC, feedback controller, and reduced-order state observer. As the servo motor is controlled by the acceleration command, the total servo system becomes the acceleration control system. Simulation results show that the proposed system have robust properties against parameter variations and external disturbances.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.4
• /
• pp.309-318
• /
• 1991

In this paper, the integrator used to reduce the error between the reference signal and response, and DC motor are constructed by bond graph. Then the model following servo controller which have the high adaptation with respect to inertia, disturbance and/or load variation in the speed control system of DC motor is designed by the bond graph, and then the usefullness of this modeling method is confirmed in operating analysis and design on controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.257-262
• /
• 1994

This paper describes an autotuning fuzzy PID controller for a position control of DC serve motor. Because ZNM(Ziegler-Nichols Method) with relay feedback has the difficulty in re-tuning the PID parameters and adaptive method has complex algorithm, a new method to overcome those problems is required. The proposed scheme determines the initial PID gains by using ZNM with relay feedback, and then re-tunes the optimal PID parameters by using fuzzy expert system whenever control conditions are changed. To show the validity of the proposed method, a position control of DC servo motor is illustrated by computer simulation and is experimented by a designed controller.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.125-128
• /
• 1989

This paper presents a DC servo motor controller using self-tuning PID algorithm, which can support Multi-processor for the real time processing. Computer simulation as well as experiment using Multi-processor(8088) are implemented with self-tuning PID algorithm. Presented algorithm is used to compare the performance of the controller with that of the classical PID controller through computer simulation and experiment. The result which use the Self-Tuning algorithm show that motor output follows the reference input trajectory fairly well inspite of load disturbances and parameter variations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.442-442
• /
• 2000

The intelligent auto-tuning method fur a strongly stable adaptive control system of a DC motor with great load inertia variation is proposed. The stable characteristic polynomial that is designed by an optimal servo is specified for the adaptive pole placement control system. The appropriate adaptive control system can be derived, by adjusting automatically the weight of a performance criterion in optimal control by means of the fuzzy inference on the basis of the stability index.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.59-62
• /
• 2002

BLDC motor is widely used in automation areas for its good maintenance and controllability. In this paper it is designed for a speed control servo system of sinusoidal typo BLDC motor that can be easily adapted to automation systems with lower cost. Also, control parameters & periods are made adjustable according to the sensors of the motor, electric and mechanical time constant, and PI and PD control are used. The processor for the proposed system is a low cost 16bit One-Chip microprocessor. By experimental results from application to the industrial sewing machine, one of the application of BLDC motor, it can be verified that under the given reference, the system is enough as a speed and position servo without overshoots.