• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.104-106
• /
• 2004

In competitive electricity markets, the System Operator (SO) coordinates the overall maintenance schedules whenever the collective maintenance schedule reported to SO by Gencos in the pool does not satisfy the specified operating criteria, such as system reliability or supply adequacy. In this paper, we divide maintenance schedule problem into master-problem and sub-problem. Master-problem is schedule coordination and sub-problem is DC-optimal power flow. If sub-problem is infeasible, we use the algorithm of modifying operating criteria of master-problem.

• 전력전자학회논문지
• /
• 제17권3호
• /
• pp.191-197
• /
• 2012

This paper proposes a new synthetic test circuit (STC) to confirm the switching operation of thyristor valve in HVDC converter. The proposed STC uses a 6-pulse thyristor converter with 2-phase chopper as a high-current source to provide turn-on current to the test valve. The operation of proposed STC was verified through theoretical analysis and computer simulations. Based on computer simulations, a hardware scaled model was built and tested to confirm the feasibility of implementing a real-size test facility. The proposed system has an advantage of simple structure and operation over the existing system.

• Journal of Biosystems Engineering
• /
• 제36권3호
• /
• pp.171-179
• /
• 2011

Facing the current hikes of labor wage and high oil price, it is needed to have energy-saving machinery which also enables us precise farm operations. Thus, it was necessary to develop a safe machine which allows secure and pleasant works along orchard slopes. In this study, a lifting utility with balance-controlled platform was developed. The platform utility could maintain to level the workbench while driving along slopes. Even the machine body was driven at the tilt angle ranges of ${\pm}20^{\circ}$, the platform bench could be maintained within ${\pm}0.5^{\circ}$ of a gimbal angle. In addition, the machine lifted up to 2.0 m using an electric-hybrid driving mechanism with a low noise. A tandem hybrid power source was developed with a DC 72 V, 100 AH for the Deep-Cycle batteries, charged with 3.5 kW gasoline generator as an auxiliary power source. HST, which is one of the CVT's, was adopted as a transmission device, and a crawer track was used for the safety of the vehicle against tip-over. The maximum lifting height of platform was is 2,500 mm, and the maximum extendable width was 2,900 mm.

• 한국전자파학회논문지
• /
• 제20권9호
• /
• pp.862-867
• /
• 2009

본 논문에서는 2 mW/$cm^2$ 이하의 낮은 입력 전력 밀도에서 동작하는 2.45 GHz 렉테나를 제안하였다. 제안된 렉테나는 다이오드 2개를 사용하는 배전압 구조의 정류부와 다이오드에서 발생하는 2차 하모닉의 재 방사를 억압하기 위한 인쇄형 야기 안테나 구조를 사용하여 설계하였다. 인쇄형 야기 안테나는 2.45 GHz에서 약 5 dB의 이득을 가지며, 안테나를 통해 입력된 전력이 $0{\sim}14\;dBm$일 때 렉테나의 변환 효율은 $32{\sim}42%$으로 측정되었다. 개발된 렉테나는 저전력 소자의 전원 공급에 활용될 것으로 기대된다.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권4호
• /
• pp.195-198
• /
• 2000

This paper illustrates a new method for constructing composite power system effective load duration curve(CMELDC) at load points. The main concept of proposed method is that the CMELDC can be obtain from convolution integral processing of the outage probabilistic distribution function of not supplied power and the load duration curve given at each load point. The effective load duration curve (ELDC) at HLI plays an important part in probabilistic production simulation, reliability evaluation, outage cost assessment and power supply margins assesment for power system planning and operation. And also, the CMELDC at HLII will extend the application areas of outage cost assessment and reliability evaluation at each load point. The CMELDC at load points using the Monte Carlo method and a DC load flow constrained LP have already been developed by authors. The effective load concept at HLII, however, has not been introduced sufficiently in last paper although the concept is important. In this paper, the main concept of the effective load at HLII which is proposed in this study is defined in details as the summation of the original load and the probabilistic loads caused by the forced outage of generators and transmission lines at this load point. The outage capacity probabilistic distribution function at HLII can be obtained by combining the not supplied powers and the probabilities of the not supplied powers at this load point. It si also expected that the proposed CMELDC can be applied usefully to research areas such as reliability evaluation, probabilistic production cost simulation and analytical outage cost assessment, etc. at HLII in future. The characteristics and effectiveness of this methodology are illustrated by case study of IEEE-RTS.

• 조명전기설비학회논문지
• /
• 제16권3호
• /
• pp.74-83
• /
• 2002

본 논문은 전력설비에 조기적용이 예상되는 초전도한류기의 파라메타를 정의하고 앞으로 개발방향을 제시하기 위하여 한류기의 동작원리, 특성 및 계통조기적용가능성들을 근거로 파라메타의 특성을 비교 ·평가하였다. 또한 한류기의 계통적용효과를 분석하기 위하여 SFCL이 기간 특고압 모델계통에 도입한 경우를 상정하여 3선지락 고장에서 저항형과 유도형 SFCL의 도입 효과에 대하여 RTDS (Real Time Digital Simulation)/EMTDC(Electromagnetic Transient DC)로 시뮬레이션하였다. 특히 저항형과 유도형의 한류효과의 비교 평가, 모선전압의 저하 억제 및 계통과 한류기의 파라메타와의 관련성에 대하여 검토하였다.

• 대한전자공학회논문지SD
• /
• 제41권6호
• /
• pp.91-98
• /
• 2004

본 논문은 일반적인 SPICE 시뮬레이터에서 사용 가능한 PCB 평판 해석 모형을 제안한다. 제안된 모형은 주파수에 따라 증가하는 두 가지 손실, 즉, 표피 손실과 유전 손실의 영향을 반영한다. 평판은 메시(mesh) 구조로 조각을 낸 후, 각각의 단위모형은 전송선 소자와 손실 모형을 이용하여 모형화된다. 손실 모형은 DC 손실을 위해서 하나의 저항이 요구되고, 표피 손실을 위해 직렬 RL ladder 회로, 유전 손실을 위해서 직렬 RC ladder 회로가 요구된다. 제안된 모형의 검증을 위해 주파수 가변저항을 사용한 SPICE ac 해석결과를 통해 비교하고, 전형적인 데스크탑 PC용 FR4 4층 PCB 적층 구조를 만들어 VNA 측정치와도 비교할 것이다. 이 모형은 RLGC 수동 소자들로만 구성되므로 주파수 영역 및 시간 영역에서도 다양한 선형/비선형 소자들과 결합하여 과도 해석이 가능하다.

• 한국전자파학회논문지
• /
• 제9권4호
• /
• pp.542-551
• /
• 1998

본 연구에서는 주파수 직접변환방식의 변조부의 채널이득/위상불균형과 국부발진누설 등의 에러보정방법을 제 안하였다. 채널불균형보정은 직교변조기에서 시험신호를 전송한 후 수신된 전력을 이용하였다. 이 방법을 적용하면 전송채널의 영향을 적게 받으므로 적응알고리듬을 주파수에 따른 위상불균형변환도 쉽게 보정할 수 있다. 본 연구에서 적용한 보정 얄고리듬(반복계수=11)은 기존의 알고리듬(반복계수=43)에 비해 보다 빠르게 수렴하고 있응을 확인하였다. 수치해석 결과국부발진누설올고려하지 않은경우는 DC-옵셋 및 채널이득/위상 불균형 보정계수와 반복계수는 각각($f_1$ = -0.0199999. $f_2$= -0.050001)과 ($C_{22}$ =0.9133. $C_{12}$= -0.0524. N= 13) 수렴하였으나, 국부 발진누설을 고려한 경우 보징계수는($f_{1}$ = -0.02,$f_{2}$ -2.2476)과 ($C_{22}$=0.9133, $C_{12}$= - -0.0524. N = 16)로 수렴하였다.

• Corrosion Science and Technology
• /
• 제18권5호
• /
• pp.206-211
• /
• 2019

Silicon carbide (SiC) thin films become superhard when they have microstructures of nanocolumnar crystalline grains (NCCG) with an intergranular amorphous SiC matrix. We investigated the role of ion bombardment and deposition temperature in forming the NCCG in SiC thin films. A direct-current (DC) unbalanced magnetron sputtering method was used with pure Ar as sputtering gas to deposit the SiC thin films at fixed target power of 200 W and chamber pressure of 0.4 Pa. The Ar ion bombardment of the deposited films was conducted by applying a negative DC bias voltage 0-100 V to the substrate during deposition. The deposition temperature was varied between room temperature and $450^{\circ}C$. Above a critical bias voltage of -80 V, the NCCG formed, whereas, below it, the SiC films were amorphous. Additionally, a minimum thermal energy (corresponding to a deposition temperature of $450^{\circ}C$ in this study) was required for the NCCG formation. Transmission electron microscopy, Raman spectroscopy, and glancing angle X-ray diffraction analysis (GAXRD) were conducted to probe the samples' structural characteristics. Of those methods, Raman spectroscopy was a particularly efficient non-destructive tool to analyze the formation of the SiC NCCG in the film, whereas GAXRD was insufficiently sensitive.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.268-268
• /
• 2012

Atmospheric pressure microwave induced plasmas are used to excite and ionize chemical species for elemental analysis, for plasma reforming, and for plasma surface treatment. Microwave plasma differs significantly from other plasmas and has several interesting properties. For example, the electron density is higher in microwave plasma than in radio-frequency (RF) or direct current (DC) plasma. Several types of radical species with high density are generated under high electron density, so the reactivity of microwave plasma is expected to be very high [1]. Therefore, useful applications of atmospheric pressure microwave plasmas are expected. The surface characteristics of SUS304 stainless steel are investigated before and after surface modification by microwave plasma under atmospheric pressure conditions. The plasma device was operated by power sources with microwave frequency. We used a device based on a coaxial transmission line resonator (CTLR). The atmospheric pressure plasma jet (APPJ) in the case of microwave frequency (880 MHz) used Ar as plasma gas [2]. Typical microwave Pw was 3-10 W. To determine the optimal processing conditions, the surface treatment experiments were performed using various values of Pw (3-10 W), treatment time (5-120 s), and ratios of mixture gas (hydrogen peroxide). Torch-to-sample distance was fixed at the plasma edge point. Plasma treatment of a stainless steel plate significantly affected the wettability, contact angle (CA), and free energy (mJ/$m^2$) of the SUS304 surface. CA and ${\gamma}$ were analyzed. The optimal surface modification parameters to modify were a power of 10 W, a treatment time of 45 s, and a hydrogen peroxide content of 0.6 wt% [3]. Under these processing conditions, a CA of just $9.8^{\circ}$ was obtained. As CA decreased, wettability increased; i.e. the surface changed from hydrophobic to hydrophilic. From these results, 10 W power and 45 s treatment time are the best values to minimize CA and maximize ${\gamma}$.