References
- Young-Sun, Kim et al., “Investigation for Installing 345kV Serial Reactor for Limiting Fault Current of Transmission Power System”, Electric Journal, pp.37-45, 2000, 9.
- S. Sugimoto et al., “Principle and Characteristics of a fault Current Limiter with Series Compensation”, IEEE Trans. on Power Delivery, Vol. 11, No. 2, pp. 842-847, 1996. https://doi.org/10.1109/61.489342
- P. G Slade et al., “The Utility Requirements for a Distribution Fault Current Limiter”, IEEE Trans. on Power Delivery, Vol. 7, No. 2, pp. 507-515, 1992. https://doi.org/10.1109/61.127043
- Technoba, “The Study of Total System for Development of Applied Superconductivity Technology”, 1994 New Sunshine Planning Report, 1995.
- E.Lung et al., “Design & Development of a 15kV, 20 kA HTS fault Current Limiter”, IEEE Trans. on Applied Superconductivity, Vol. 10, No. 1, pp. 832-835, 2000. https://doi.org/10.1109/77.828360
- E.M Lung, “Superconducting Fault Current Limiter”, IEEE power Engineering Review, pp 15-30, August 2000.
- H. Kameda et al., “Setting Method of Specific Parameter of a Superconducting Fault Current limiter Considering the Operation of Power System protection”, IEEE Teans. on Applied Superconductivity, Vol. 9, No. 2, pp. 1355-1360, 1999. https://doi.org/10.1109/77.783554
- L. Salasoo et al., “Comparison of Superconducting Fault Limiter concepts in Electric Utility Application”, IEEE Trans. on Applied Superconductivity, Vol. 5, No. 2, pp 1079 - 1082, June 1995. https://doi.org/10.1109/77.402739
- B.Dutoit et al., “A Nonlinear Model of Silver Sheathed Bi(2223) High Temperature Superconducting Tape”, IEEE Trans. on Applied Superconductivity, Vol. 7, No. 2, pp 294-297, 1997. https://doi.org/10.1109/77.614488
- R.A Weller et al., “Computer Modelling of Superconducting Film Type Fault Current Limiters”, IEEE Tans. on Applied Superconductivity, Vol. 9, No. 2, pp.1377-1380, 1999. https://doi.org/10.1109/77.783559
- T Ise et al., “Reduction of influence and Current Rating of the Coil and Enhancement of fault Current Limiting Capacity of a Rectifier Type Superconducting Fault Current Limiter”, IEEE Tans. on Applied Superconductivity, Vol. 11, No. 1, pp.1377-1380, 1999.
- T. Satoh et al., “Three-Phase Fault Current Limiter with One DC S/N Transition Element”, IEEE Trans. AS, Vol. 11, No. 1, pp 2398-2401, 2001.
- P. Tixador, “Superconducting Current Limiters-Some Comparison and Influential Parameters”, Principle and Previous Studies", IEEE Trans. AS, Vol. 4, No. 4, pp. 190-197.2001.
- T. Matsumura et al., “Design Guideline of Flux-Lock Type HTS Fault Current limiter for Power System Application”, IEEE Trans. AS, Vol. 11, No. 1, pp. 1956-1959, 2001.
- T. Hoshino et al., “Recovery Time of Superconducting Non-Inductive Reactor Type Fault Current Limiter”, IEEE Trans. on Magnetics, Vol. 32, No. 4, pp.2403-2406, 1996. https://doi.org/10.1109/20.511357
- N. Hayakawa et al., “A System Study on Superconducting Fault Current Limiting Transformer (SFCLT) with the Function of Fault Current Suppression and System Stability Improvement”, IEEE Trans. AS, Vol. 11, No. 1, pp. 1936-1939, 2001.
- M. Yamaguchi et al., “A Study on One DC Reactor Type Three-Phase Current Limiter”, T. IEE Japan, Vol. 119-B, No. 11, pp. 1166-1173, 1999.
- L.S. Fleishman et al., “Design Consideration an Inductive High Tc Superconducting Fault Current Limiter”, IEEE Trans. AS, Vol. 3, No. 1, pp. 570-573, 1993.
- V.D Pham et al., “Toward the SFCL”, IEEE Trans. on Power Delivery, Vol. 6, No.2, pp. 801-808, 1991. https://doi.org/10.1109/61.131138
- T. Hara et al., “Development of A New 6.6kV/1500A Class SFCL”, IEEE Trans. on Power Delivery, Vol. 8, No.1, pp. 182-190, 1993. https://doi.org/10.1109/61.180335
- M. Yamaguchi et al., “Performance od DC Reactor Type Fault Current Limiter Using High Temperature Superconducting Coil”, IEEE Trans. AS, Vol. 9, No. 2, pp. 940-943, 1999.