• Journal of Ecology and Environment
• /
• v.46 no.2
• /
• pp.111-125
• /
• 2022

Background: Zanthoxylum armatum is one of the 30 prioritized medicinal plants for economic development of Nepal with a high trade value. Understanding the ecology of individual species is important for conservation and cultivation purposes. However, relation of ecological factors on the distribution and populations of Z. armatum in Nepal remain unknown. To address this knowledge gap, an attempt has been made to study the population structure, distribution, and regeneration potentiality of Z. armatum. Vegetation sampling was conducted at six different localities of Salyan district along the elevation range of 1,000 m to 2,000 m. Results: Altogether 50 plant species belonging to 44 genera under 34 families were found to be associated with Z. armatum. Significantly higher species richness was found at Rim (1,400-1,700 m) and Chhatreshwori (1,800-2,000 m) and lower at Kupinde (1,600-1,800 m). The highest population density of Z. armatum was at Kupinde (1,600-1,800 m) with a total of 1,100 individuals/ha. and the lowest at Chhatreshwori (1,800-2,000 m) with 740 individuals/ha. Based on the A/F value (Whitford index), it can be said that Z. armatum has random distribution in the study area. The plants were categorized into seedlings, saplings and adults based on plant height and the status of natural regeneration category determined. The regeneration potentiality of Z. armatum in the study area was fair with the average seedlings and saplings densities of 150 and 100 individuals/ha. Respectively. A Shannon-Weinner index mean value of 2.8 was obtained suggesting high species diversity in the study area. Conclusions: The natural distribution and regeneration of Z. armatum is being affected in the recent years due to anthropogenic disturbances. Increasing market demand and unsustainable harvesting procedures are posing serious threat to Z. armatum. Thus, effective conservation and management initiatives are most important for conserving the natural population of Z. armatum in the study area.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.159-179
• /
• 2022

Often a network becomes complex, and multiple entities would get in charge of managing part of the whole network. An example is a utility grid. While the entire grid would go under a single utility company's responsibility, the network is often split into multiple subsections. Subsequently, each subsection would be given as the responsibility area to the corresponding sub-organization in the utility company. The issue of how to make subsystems of adequate size and minimum number of interconnections between subsystems becomes more critical, especially in real-time simulations. Because the computation capability limit of a single computation unit, regardless of whether it is a high-speed conventional CPU core or an FPGA computational engine, it comes with a maximum limit that can be completed within a given amount of execution time. The issue becomes worsened in real time simulation, in which the computation needs to be in precise synchronization with the real-world clock. When the subject of the computation allows for a longer execution time, i.e., a larger time step size, a larger portion of the network can be put on a computation unit. This translates into a larger margin of the difference between the worst and the best. In other words, even though the worst (or the largest) computational burden is orders of magnitude larger than the best (or the smallest) computational burden, all the necessary computation can still be completed within the given amount of time. However, the requirement of real-time makes the margin much smaller. In other words, the difference between the worst and the best should be as small as possible in order to ensure the even distribution of the computational load. Besides, data exchange/communication is essential in parallel computation, affecting the overall performance. However, the exchange of data takes time. Therefore, the corresponding consideration needs to be with the computational load distribution among multiple calculation units. If it turns out in a satisfactory way, such distribution will raise the possibility of completing the necessary computation in a given amount of time, which might come down in the level of microsecond order. This paper presents an effective way to split a given electrical network, according to multiple criteria, for the purpose of distributing the entire computational load into a set of even (or close to even) sized computational loads. Based on the proposed system splitting method, heavy computation burdens of large-scale electrical networks can be distributed to multiple calculation units, such as an RTDS real time simulator, achieving either more efficient usage of the calculation units, a reduction of the necessary size of the simulation time step, or both.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.191-198
• /
• 1998

The error are equation of DC-CDMA/MDPSK signal has been derived in m-distribution and Rician fading channels. Predeteception multipath MRC(Maximal Ratio Combining) diversity technique is employed for improving the bit error rate performance. The suitability of modeling a Rician fading environment by properly chosen m-distribution model is examined. Using the derived equation the error performance has been evaluated and shown in figures as a function of PN code sequence length(N), user number(U), multipath number(P), fading index(m), Rician factor(K), number of diversity branches(L) and ($E_b/N_o$). The results show that the error performance in Rician fading agrees well with that in m-distribution fading as fading becomes weak and as user number(U) increases and as multipath number(P) increases and diversity number(L) increases.

• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.93-109
• /
• 2020

Purpose: The radiochromic film (Gafchromic EBT3, Ashland Advanced Materials, USA) and 3-dimensional analysis system dosimetry checkTM (DC, MathResolutions, USA) were evaluated for patient-specific quality assurance (QA) of helical tomotherapy. Materials and Methods: Depending on the tumors' positions, three types of targets, which are the abdominal tumor (130.6㎤), retroperitoneal tumor (849.0㎤), and the whole abdominal metastasis tumor (3131.0㎤) applied to the humanoid phantom (Anderson Rando Phantom, USA). We established a total of 12 comparative treatment plans by the four geometric conditions of the beam irradiation, which are the different field widths (FW) of 2.5-cm, 5.0-cm, and pitches of 0.287, 0.43. Ionization measurements (1D) with EBT3 by inserting the cheese phantom (2D) were compared to DC measurements of the 3D dose reconstruction on CT images from beam fluence log information. For the clinical feasibility evaluation of the DC, dose reconstruction has been performed using the same cheese phantom with the EBT3 method. Recalculated dose distributions revealed the dose error information during the actual irradiation on the same CT images quantitatively compared to the treatment plan. The Thread effect, which might appear in the Helical Tomotherapy, was analyzed by ripple amplitude (%). We also performed gamma index analysis (DD: 3mm/ DTA: 3%, pass threshold limit: 95%) for pattern check of the dose distribution. Results: Ripple amplitude measurement resulted in the highest average of 23.1% in the peritoneum tumor. In the radiochromic film analysis, the absolute dose was on average 0.9±0.4%, and gamma index analysis was on average 96.4±2.2% (Passing rate: >95%), which could be limited to the large target sizes such as the whole abdominal metastasis tumor. In the DC analysis with the humanoid phantom for FW of 5.0-cm, the three regions' average was 91.8±6.4% in the 2D and 3D plan. The three planes (axial, coronal, and sagittal) and dose profile could be analyzed with the entire peritoneum tumor and the whole abdominal metastasis target, with planned dose distributions. The dose errors based on the dose-volume histogram in the DC evaluations increased depending on FW and pitch. Conclusion: The DC method could implement a dose error analysis on the 3D patient image data by the measured beam fluence log information only without any dosimetry tools for patient-specific quality assurance. Also, there may be no limit to apply for the tumor location and size; therefore, the DC could be useful in patient-specific QAl during the treatment of Helical Tomotherapy of large and irregular tumors.

• Journal of the Korean earth science society
• /
• v.35 no.1
• /
• pp.29-40
• /
• 2014

A DC resistivity survey was performed to detect anomalies beneath concrete pavement. A set of high conductive media and planar electrodes were used to lessen the effect's a high contact resistance of concrete. Results of the resistivity survey were analyzed and compared with those of other geophysical surveys such as Ground Penetration Radar (GPR), Impulse Response (IR), and Multi-channel Analysis of Surface Waves (MASW), which were carried out in the same location. The results of resistivity survey showed a high resistive distribution in the section of sink and pavement where a pattern of reinforcement was observed through the GPR survey. Also, a comparison of results between the IR and resistivity surveys indicated that the high resistivity was produced by the high dynamic stiffness in the reinforced section. The co-Kriging of both the results of DC resistivity and MASW surveys at the same location showed that an integrated geostatistical analysis is able to give more accurate description on the anomalous subsurface region than can a separate analysis of each geophysical approach. This study suggests that the integrated geostatistical approaches were used for a decision-making process based on the geophysical surveys.

• Journal of Korean Society of Forest Science
• /
• v.9 no.1
• /
• pp.81-86
• /
• 1969

In present paper, the morphological characters in perfect stage of Microsphaera polygoni(DC.) Sawada on Robinia pseudoacasia were investigated and the phylogenetic relationship between Gen. Erysiphe and Microsphaera was discussed with variation of appendages. The results are summarized as follows: 1. The perithecia of the powdery mildew fungus on Robinia pseudoacasia were rarely formed on the surface of the leaves just before difoliation in late autumn and their forming period was very short. 2. Powdery mildew fungus on R. pseudoacasia was identified as Microsphaera polygoni(DC.) Sawada in Korea. 3. Appendage of the fungus are both Erysiphe and Microsphaera types in shape, and plenty of intercalary types are intervened between both types. Number of perithecia bearing upper various appendages appears the normal distribution with both poles of typical Erysiphe and Microsphaera types 4. If Blumer's theory on the phylogenetic relationship of Erysiphaceae is right, variation of the appendages of the fungus might be evolved from Gen. Erysiphe to Gen. Microsphaera.

• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.676-679
• /
• 2010

Nano composite particles were synthesized from a bulk ZrVFe alloy ingot by transferred DC thermal plasma. Effects of plasma gas flow rate on the characteristics of the produced nano composite particles were investigated. The characteristics of the synthesized powder were analyzed by field scanning electron microscopy (FE-SEM), light scattering particle size analyzer (PSA), energy dispersive X-ray spectroscopy (EDS), X-ray diffractometer (XRD), and Brunauer-Emmett-Teller (BET) surface area analyzer. As the flow rate of plasma gas increased from 20 L/min to 40 L/min, the average particle size decreased from 91 nm to 55 nm, the particle size distribution became narrower, the surface area increased from $200\;m^2/g$ to $255\;m^2/g$, the particle composition was nearly unaffected, and the particle crystallinity was improved.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.3
• /
• pp.40-46
• /
• 2009

Toroidally-wound brushless direct-current (BLOC) machines are compact, highly efficient, and can work across a large magnetic gap. For these reasons, they have been used in pumps, flywheel energy storage systems and left ventricular assist devices among others. The common feature of these systems is a spinning rotor supported by a set of (either mechanical or magnetic) bearings. From the view point of dynamics, it is desirable to increase the first critical speed of the rotor so that it can run at a higher operating speed. The first critical speed of the rotor is determined by the radial stiffnesses of the bearings and the rotor mass. The motor also affects the first critical speed if the rotor is displaced from the rotating center. In this paper, we analytically derive the flux density distribution in a toroidally-wound BLOC machine and also derive the negative stiffness of the motor, based on the assumption that the rotor displacement perturbs the flux density distribution linearly. The estimated negative stiffness is validated by finite element analyses.

• Journal of Advanced Navigation Technology
• /
• v.15 no.3
• /
• pp.364-371
• /
• 2011

In P2P distribution mobile networks, QoS of streaming media services are under heavy influence from overheads such as congestion, latency, and interference. The problem is further complicated by the fact that the popularity of media objects changes over time. This paper proposes a new FSMS+ (Fuzzy Similarity-based Multi-level Streaming Scheme) which minimizes performance degradation of streaming services due to overhead. We then utilize fuzzy similarity-based relevance that can dynamically stream the streaming media object with minimum overhead. The simulation result showed that the proposed scheme has better performance in retransmission rate, congestion control rate and latency rate than the other existing methods of distance method, DC (disk caching) method, and prefix method.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.740-754
• /
• 2015

This paper focuses on the reverse blocking busbar protection scheme with aim to improve the speed of its operation and at the same time to increase operational reliability, flexibility and stability of the protection during external and internal faults by implementation of the extended functionality provided by the IEC61850 standard-based protective Intelligent Electronic Devices (IEDs). The practical implementation of the scheme by the use of IEC 61850 standard communication protocol is investigated. The proposed scheme is designed for a radial type of a distribution network and is modeled and simulated in the DigSILENT software environment for various faults on the busbar and its outgoing feeders. A laboratory test bench is built using three ABB IEDs 670 series that are compliant with the IEC 61850 standard, CMC 356 Omicron test injection device, PC, MOXA switch, and a DC power supplier. Two types of the reverse blocking signals between the IEDs in the test bench are considered: hard wired and Ethernet communication by using IEC 61850 standard GOOSE messages. Comparative experimental study of the operational trip response speeds of the two implementations for various traffic conditions of the communication network shows that the performance of the protection scheme for the case of Ethernet IEC 61850 standard-based communication is better.