• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.174-186
• /
• 1996

This study was carried out in order to understand the plan, design, constructing and actual condition of management of modernized horticultural facilities in Kyungpook Province which had been constructed from 1992 to 1995 funded by Government support. The aim of this study is to provide reference data for success of the forth project. It was performed by making up a question about driving of project and management condition of equipment after constructing. The results obtained from this study are as follows: 1. 73.5% of facilities horticulture farmhouse recognized that the prospect of greenhouse is bright, but 92.5% of the farmhouse also recognised that they need technical consultation on protected horticulture farming. Therefore, technical educations would must be enhanced about foundation of greenhouse and cultivation technique. 2. The holding times of explanatory meetings, cause of understanding to farmhouse, were one or two times in greenhouse construction, and 62.5% of the farmhouse expressed the insufficiency at the explanation and educational data. For this reason, it was judged that the construction contract had been delayed more than 5 months in 49.3% of the farmhouse after the decision of project budget. 3. In constructing after a contract, the rates of construction delay is 53.4% and defect occurrence is 41.1%. The biggest reasons of construction delay was insufficiency of worker and materials supply. Each percentage is 29.1%. And the reason of defect occurrence is badness of machinery equipment(62.9% ). 4. In management of greenhouse, a pipe-constructed plastic film greenhouse changes plastic film every one and three years because of sticking dust on plastic film. It was needed to about in cleaning technique of coverings. Because that used 3-5 years only half of the expected life span. 5. The order of broken rating in the subsidiary equipment is like this lollop ventilator (42.8%), a general control system(33.3%) especially, in the case of a general control system, the rate of all family can control is 52.7%. so, it is time to develop easy control equipment which every one could use as soon as possible. 6. When choose heat generator as decide capacity, the most priority is the mount of heat generator the percent is 45.5% heat generator and as decide model, the private purchase's percent is 77.3%. It is higher than a public bidding heat generator the percent is 22.7% heat generator when it compare with a public bidding. In the case of $CO_2$ generator, using rate is only 19.0%. The using rate is very low, so it needs education how to use depends on the way of the subsidiary equipment. 7. In the case of seedlings, it is asked to use factory-processed seedling effectively. because it's difficult to get security of labors(58.8%), hoped crops (55.9%) access same crops(29.4%) much more and changing of crops depends on market situation. that is the main reason the lack of knowhow.

• Journal of Convergence for Information Technology
• /
• v.10 no.5
• /
• pp.117-125
• /
• 2020

Our study identifies a cost and a benefit incurred in implementing an investment project to offer new public services by use of food waste disposers and direct input of feces in sewers. This is done with identifying costs of each processing division and benefits of the project by objective statistical data and engineering perspective. In summary, cost items identified are as follows: there are house laterals, removal of septic tanks, etc. for sewer pipes system. As to water quality conservation, cost incurs in storm water outfalls and divert chambers, sewage storage tanks, equipment to treat sewer overflows, and so on. With respect to sewage treatment plants(STPs), there are so many items as increase of contaminant loads in influent of STPs, and other items. There are benefit items in health improvement due to odor mitigation, increase of energy productivity, saving cost of food waste treatment and cleaning septic tanks, etc. These estimates will be used as a basic data for its economic effect.

• Asian Journal for Public Opinion Research
• /
• v.5 no.2
• /
• pp.63-83
• /
• 2018

This exploratory research investigated the factors that influence foreign tourists' decision to use dental services in Thailand. The questionnaire was used to collect data from foreign tourists who used dental services in a hospital or dental clinic in Thailand. Data from 233 respondents completed questionnaires were analyzed using frequency distribution, percentages, mean, and standard deviation. The findings revealed that respondents were most likely to be Asian (54.5%) followed by European (33.9%), females (64.8%) aged between 26-35 years (39.1%), business owners (45.9%), and came to Thailand with friends (47.6%). Regarding travel purposes and contact with dental services, most of them travel for pleasure (52.89%) and contact the clinic directly through the Internet(63.95%) The health/medical services used included health check-up (34.48%), dental services (29.22%), and day spa/massage (23.23%). The dental treatment that respondents had completed or planned to do included dental check-up (29.87%), tooth cleaning (26.68%), and tooth whitening (11.41%). Based on the influence of $_7P$ factors towards the respondent's decision to use the dental service, it was found that the average mean score range from 4.33-4.15 which were at the high to the very high level of influence to their decisions. The people factor had the highest average mean score (mean 4.33, SD= 0.604)followed by the price factor (mean 4.32, SD= 0.651), which both had the highest level of influence. The physical evidence factor had the lowest mean score (mean 4.15, SD+0.752) which was at the high level of importance. It should be noted that the factor concerning the modern technology and dental equipment (mean 4.33, SD=0.606) and factor on the quality of service (mean 4.43, SD= 0.598) had the highest mean score followed by the total cost of the trip including services being reasonable (mean 4.37, SD=0.582). Regarding the country factor, it was found that this factor also had highest influence level (mean 4.30, SD=0.67) and affordability had the highest mean score (mean 4.39, SD=0.614).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.173-179
• /
• 2020

The purpose of this study was to examine whether chicken-rearing activity is effective on the character, emotion and self-esteem of middle school students, as a pilot study for the development of an animal-assisted education program based on chicken-rearing activity. School was selected as the place where students have experience with raising animals before and no poultry farms were located near the school. The experimental group consisted of 11 students as the chicken-rearing group. The conducted activities were greeting chickens, cleaning henhouse, feeding them, and picking eggs up for five months. Character, emotion and self-esteem scales were used as test tools, and pre-testing and post-testing were conducted to verify the effectiveness of the study. Data collected were analyzed by using SPSS Win 25.0 statistical program. As a result, the character, emotional stability and self-esteem of middle school students who participated in chicken-rearing activity were improved. This study is meaningful in that the chicken-rearing activity proved to be effective for the character, emotion and self-esteem of middle school students and prepared an experimental case study for developing an animal-assisted education program based on chicken-rearing activity. It is expected to be useful as basic data of animal-assisted education for adolescents in school.

• Convergence Security Journal
• /
• v.17 no.1
• /
• pp.15-30
• /
• 2017

Since the 1990s, fingerprint recognition has attracted much attention among scholars. There have been numerous studies on fingerprint recognition. However, most of the academic papers have focused mainly on how to make a technical advance of fingerprint recognition. there has been no significant output in the analysis of the research trends in fingerprint recognition. It's essential part to describe the overall structure of fingerprint recognition to make further studies much more efficient and effective. To this end, the primary purpose of this article is to deliver an overview of the research trends on fingerprint recognition based on network analysis. This study analyzed abstracts of the 122 academic journals ranging from 1990 to 2015. For gathering those data, the author took advantage of an academic searchable data base-RISS. After collecting abstracts, cleaning process was carried out and key words were selected by using Krwords and R; co-occurrence symmetric matrix made up of key words was created by Ktitle; and Netminer was employed to analyze closeness centrality. The result achieved from this work included followings: research trends in fingerprint recognition from 1990 to 2000, 2001 to 2005, 2006 to 2010, and 2011 to 2015.

• Journal of Family Resource Management and Policy Review
• /
• v.17 no.2
• /
• pp.55-74
• /
• 2013

This research developed standardized satellite accounts for household production to measure the entire production in Korea using representative Korean data. This study utilized standardized methods for measuring the expenditure and consumption of expendable supplies as an element of intermediate goods in household production. The results of this research can be summarized as follows. First, the total value of household production in Korea in 2009 turned was 268 trillion won, which would be 10.16% of the GDP, based on using the method of replacement by specialty for estimating the value of housework, while it was 356 trillion won, which would be 13.5% of the GDP (2,636 trillion won), based on the method of opportunity cost. Second, the economic value of labor invested in household production was 220 trillion won when using the data from 12 main corresponding wages in the market, while it was 203 trillion won when using the method of total replacement, which used the wages of housekeepers, and 290 trillion won when using the method of opportunity cost in measuring the value of housework labor. Third, in estimating the proportion by section in terms of the total value of household production, the portion of labor in household production was measured from 76% to 82%, depending on the methods used, which is the most significant section. These results indicate that housework has the characteristics of labor-centered work. On the other hand, the value of expenditure on and consumption of expendable supplies, as one element of intermediate goods, is 63 trillion won, which is 17.7% (using the method of opportunity cost in measuring the labor of housework) of household production. Also, the value of capital goods, as the other element of intermediate goods is 2.3 trillion won, which is 0.9% (using the method of opportunity cost) of household production. In conclusion, as an element of household production, housework labor was higher in household production than expenditures on expendables, especially for cooking, cleaning, and caring for children. In the future, people should be cautious about estimating that the amount of household work could be reduced, as women's labor in the market and the household work produced by the market will increase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.299-305
• /
• 2019

As the damage factors of the three­storey stone pagoda of the Bulguksa Temple in Gyeongju could cause a reduction in the historical and artistic value and accelerate the deterioration of the stone, an appropriate solution is needed. The aim of stone conservation is to conserve the original shape and convey originality from the ancestors to their descendants. This procedure includes a record of the condition, being available in the future. In particular, the damage assessment could be used in conservational research, educational data, conservational treatment, and preventive data. As a result of quantitative damage assessment, biological damage indicated 159 %, chemical damage 114 %, and physical damage 16 %. The west direction revealed 95 % because of the amount of sunshine, moisture, and expansion of rock. Complex factors and high range damage were observed on the foundation and body of the pagoda. Since the top of pagoda was restored in the 1970s, the state presented a good condition. By doing this, the number of organisms could be reduced by cleaning and the physical damage could be minimized by bonding. On the other hand, continuous monitoring will be needed because there is a possibility of reforming the damage in the future.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.125-133
• /
• 2019

A microscope is the fundamental research and diagnostic apparatus for clinical investigation of signaling transduction, morphological changes and physiological tracking of cells and intact tissues from patients in the biomedical laboratory science. Proper use, care and maintenance of microscope with comprehensive understanding in mechanism are fully requested for reliable image data and accurate interpretation for diagnosis in the clinical laboratory. The standard operating procedure (SOP) for light microscopes includes performance procedure, brief information of all mechanical parts of microscopes with systematic troubleshooting mechanism depending on the laboratory capacity. Maintenance program encompasses cleaning objective, ocular lenses and inner optics; replacement and calibration of light source; XY sample stage management; point spread function (PSF) measurement for confocal laser scanning microscope (CLSM); quality control (QC) program in fluorescent microscopy; and systematic troubleshooting. Laser safety is one of the concern for medical technologists engaged in CLSM laboratory. Laser safety guideline based on the laser classification and risk level, and advisory lab wear for CLSM users are also expatiated in this overview. Since acquired image data presents a wide range of information at the moment of acquisition, well-maintained microscopes with proper microscopic maintenance program are impulsive for its interpretation and diagnosis in the clinical laboratory.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.3
• /
• pp.379-389
• /
• 2022

The number of public transportation users has dropped drastically due to COVID-19. In this work, my survey was conducted to uncover the factors that influence citizens' travel patterns. Data were collected and logistic regression analysis on the shifts in transportation was undertaken. Additionally, an importance-performance analysis was carried out to investigate how to effectively operate public transportation systems and improve facilities. The main research findings were as follows: First, the more individuals were concerned about COVID-19 (+) and being infected when using public transportation (+), the greater the tendency to switch to private transportation modes. Secondly, when it came to personal traits, respondents who could drive a car (+) or owned a car (+)or did more online shopping (+) or used public transportation for trips (+) tended to switch over, compared with respondents who could not drive or did not own a caror used public transportation to commute. In addition, respondents who were vaccinated (-) or had more household members tended not to switch transportation modes, compared with those who were not vaccinated or had fewer household members. Third, it is important to continue the following efforts to safeguardhygiene linked to public transportation: wearing masks, disinfecting hands, controlling diseases, and general cleaning. The conclusion was that it is important to put traffic congestion and ventilation issues first, especially in regards public transportation, which was not rated as satisfactory enough compared to its importance. The research findings can provide useful basic data when establishing countermeasures to the current COVID-19 circumstances in the areas of public transportation operation and management and in the event of an infectious disease outbreak in the future.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.155-164
• /
• 2005

Home-service robots need to have sufficient spatial information about the surroundings for interacting with human intelligently and performing services efficiently. It is very important to investigate the efficient interaction style that supports map building task through human-robot collaboration. We first analyzed map building task with a cleaning robot and drew 4 design factors and tentative solutions, including map building procedure (task-preferred procedure/space- preferred procedure), LCD display installation (robot/robot+remote control), navigation method (push type/pull type), feedback modality(GUI/GUI+TTS). The design factors and tentative solutions were defined as independent variables and levels. This research investigated how those variables affect to the human task performance and behavior in map building tast. 8 kinds of experiment prototypes were built and usability test among 16 house wives was conducted for acquiring empirical data. As the experiment result, in terms of map building procedure, space-preferred procedure indicated better task performance than task-proffered procedure as we expected. For the LCD display installation factor, remote control with LCD display indicated higher task performance and subjective satisfaction. In robot navigation method, it was very difficult to find a significant difference between push type and pull type which contrary to our expectation. In fact, push type indicated higher subjective satisfaction. Also in feedback modality, we have acquired negative feedback an additional TTS operation guidance. It seems that robot's autonomy before achieving spatial information is rudiment condition which means users are just interacting with a mobile appliance. Thus they prefer remote-control-based interaction style in robot map building process as they used in traditional appliance control.