• 제목/요약/키워드: D8/17

검색결과 2,467건 처리시간 0.029초

UWB 평면 패치안테나의 지향성이득의 향상 방법 (Directivity Gain Improvement Method for UWB Coplanar Patch Antenna)

  • 주창복
    • 대한전자공학회논문지TC
    • /
    • 제49권6호
    • /
    • pp.63-70
    • /
    • 2012
  • UWB 주파수대역의 안테나로써 CPW 급전의 U-자형 평면 패치 안테나모델의 지향성이득 향상 방법을 검토하였다. 지향성 이득 향상을 위해 CPW 급전의 U-자형 패치 안테나 모델에 개구슬롯 반사면을 부가하여 마이크로스트립 구조로 재구성하였다. 재구성한 안테나는 특성 임피던스 $50.08{\Omega}$에 대해 반사계수는 -6.5dB(VSWR < 3.3)이하이며 지향성이득은 7.8 dBi ~ 9.6 dBi, 전후방비는 17.8dB ~ 28.7dB 그리고 ${\theta}=0^{\circ}$의 주방사 방향에 대해 -3dB 방사각의 범위가 ${\pm}30^{\circ}$의 방사지향성의 패턴을 나타내 보였다.

CRLH-Stub를 이용한 이중대역 저지 초광대역 대역통과 여파기 (Ultra-Wideband Band Pass Filter with Controllable Dual Notched Bands Using the CRLH Stubs)

  • 정승백;양승인
    • 대한전자공학회논문지TC
    • /
    • 제49권7호
    • /
    • pp.65-70
    • /
    • 2012
  • 본 논문은 CRLH와 DGS 구조를 합성하여 초광대역 대역 통과 특성이 있으면서 통과대역 내에 조정가능한 이중대역 저지 기능이 있는 필터를 제안한다. 초광대역 대역통과 여파기는 WLAN과의 전파간섭을 피하기 위해 2.4GHz와 5.8GHz를 저지하여야 한다. 이를 위해 본 논문에서는 CRLH구조를 이용하여 2중 저지 대역을 형성하였으며 통과 대역 이후 주파수에서 우수한 대역 저지 효과를 얻기 위해 DGS구조를 합성하였다. 실제 제작된 여파기 측정결과 2.4GHz와 5.8GHz에서 30dB 이상의 저지 특성을 확인하였다. 차단 주파수는 CRLH의 파라미터를 변경함으로써 매우 쉽게 이루어질 수 있다. 제작된 여파기는 0.4dB(Lower Pass-Band), 0.7dB(Upper Pass-Band)의 삽입손실과 0.6ns 이하의 작은 Group Delay를 확인하였다. 또한 크기가 17mm*17mm 로 매우 소형이다.

개심수술 102례 의 임상적 고찰 (Clinical Analysis of 102 Cases of Open Heart Surgery)

  • 김형묵
    • Journal of Chest Surgery
    • /
    • 제14권3호
    • /
    • pp.235-240
    • /
    • 1981
  • A total of 102 patients who had an Open Heart Surgery from April 1976 to July 1981 were reviewed. 55 paeitnts were congenital heart disease and 47 patients were acquired heart disease. Among SS patients of congenital heart disease, 18 T 0 F, 18 V S D, 8 A S D, and each one case of l\ulcorner 0 R V, Truncus arteriosus, Ebstein anomaly, Single ventricle, P D A, P 5, A S D + P 5, E C D, V 5 D + P D A, A - P window, D C R V were noted respectively. In 47 patients of acquired heart disease and one Ebstein patient, 46 prosthetic values were implanted: 17 had M V R, 4 had A V R, 2 had M V R + A V R, and 4 had M V R + T V R and one T V R. The operative mortality was 8.S% in acquired heart disease and 17% in congenital heart disease. The follow up period was between 6 months and 6 years. There were 3 cases of late mortality in acquired heart disease and one case in congenital heart disease.

  • PDF

Ku-Band용 위상 고정 고조파 발진기 설계 (Design of Ku-Band Phase Locked Harmonic Oscillator)

  • 이건준;김영식
    • 한국전자파학회논문지
    • /
    • 제16권1호
    • /
    • pp.49-55
    • /
    • 2005
  • 본 논문에서는 아날로그 위상 고정 루프(PLL: Phase Locked Loop)를 이용한 무선 LAN(Wireless Local Area Network)용 위상 고정 고조파 발진기(PLHO: Phase Locked Harmonic Oscillator)를 설계 및 제작하였다. 이 고조파 발진기는 Ring 공진기, 주파수 동조를 위한 바랙터 다이오드 그리고 위상 고정 루프 회로로 구성된다. 발진기의 8.5 GHz의 기본 주파수는 위상 고정 루프를 위한 귀환 신호로 이용되고 17.0 GHz의 2차 고조파는 출력으로 이용되므로 위상 고정 시스템에서 위상 비교를 위한 주파수 분배기를 한 단계 줄일 수 있다. 위상 비교기로는 샘플링 위상 검출기(SPD: Sampling Phase Detector)를 사용하여 위상고정 루프 회로를 간단히 하였다. 위상고정 고조파 발진기의 발진 출력은 17.0 GHz에서 2.17 dBm, 기본 주파수와 3차 고조파 억압 특성은 각각 -31.5 dBc, -29.0 dBc이다. 위상잡음은 각각 -87.6 dBc/Hz at 1 kHz와 -95.4 dBc/Hz at 10 kHz이다.

S-대역 트랜스폰더용 주파수 체배기 설계 및 제작 (Design and Fabrication of the Frequency Multiplier for S-band Transponder)

  • 김병수;고봉진
    • 한국항행학회논문지
    • /
    • 제10권4호
    • /
    • pp.348-355
    • /
    • 2006
  • 본 논문에서는 KOMPSAT 3호의 S-대역 트랜스폰더용 주파수 체배기를 설계 및 제작하였다. 수신부 첫째 단의 국부 발진 신호(2008.8MHz)를 생성하는 108배 주파수 체배기의 구성은 X9 주파수 체배기, 1st X2 주파수 체배기, 2nd X2 주파수 체배기, 최종단의 X3 주파수 체배기로 구성된다. 측정 결과, 최종단의 X3 주파수 체배기의 출력주파수인 2008.8MHz에서의 8.17dBm의 출력전력과 -56.67dBc의 고조파 억압 특성을 보였다. 또한 -3dB 이상의 변환이득을 갖는 대역폭은 14MHz로 나타났다.

  • PDF

수술 전 금식이 노인환자의 혈당에 미치는 영향 (Influence of Pre-operative Fasting Time on Blood Glucose in Older Patients)

  • 홍미숙;윤혜상
    • 대한간호학회지
    • /
    • 제41권2호
    • /
    • pp.157-164
    • /
    • 2011
  • Purpose: This study was performed to identify changes in blood glucose at preoperative fasting time in surgical patients over 60 yr. Methods: Data collection was performed from July, 2008 through July, 2009. Participants consisted of 80 nondiabetic surgical patients. Blood glucose was checked from 3 to 5 times. The 5 times were 2-hr fasting on the pre-operative day (T1, n=80), 8 hr (T2, n=80), 10 hr (T3, n=17), 12 hr (T4, n=34) and 14 hr fasting on the day of the operation (T5, n=29). Results: Of the patients, 27.5% had a blood glucose level of less than 79 mg/dL at T2; 17.6% at T3; 32.4% at T4; and 17.2% at T5. Mean blood glucose levels were 93.8 mg/dL at T1; 88.4 mg/dL at T2; 91.7 mg/dL at T3; 87.4 mg/dL at T4: and 94.1 mg/dL at T5. Blood glucose was the lowest at T2 (p<.001). Conclusion: As 17.6-32.4% of the patients showed the blood glucose level of less than 79 mg/dL at 8-14 hr pre-operative fasting, the authors recommend that surgical patients p>60 yr-of-age be observed for hypoglycemia during pre-operative fasting of more than 10 hr and that surgical patients >60 yr-of-age with risks for hypoglycemia be scheduled for operation within 10 hr preoperative fasting.

대구시내(大邱市內) 일부(一部) 방직공장(紡織工場)의 기직공(機織工)에 대(對)한 개별청력검사(個別聽力檢査) 보고(報告) (Noise-Induced Hearing Disturbance of Textile Weavers by Individual Pure Tone Threshold Determination Test in Taegu City)

  • 박홍진
    • Journal of Preventive Medicine and Public Health
    • /
    • 제7권1호
    • /
    • pp.177-183
    • /
    • 1974
  • It is generally recognized that the environmental noise of the various working places thought to be the cause of hearing disturbance. This survey was carried out to evaluate the prevalence of noise-induced occupational bearing loss among the weavers of 39 textile industries in Taegu, Korea. For this survey, 432 male workers and 2,023 female workers were examined their hearing acuity by Individual pure tone threshold determination test(air conduction), from November, 1972, to January, 1973. Main findings were as follows : 1. The mean of noise intensity of the 54 weaving rooms was, in over all, $95.6{\pm}4.2dB\;(A),\;95.9{\pm}4.0dB\;(B)\;and\;96.2{\pm}3.9dB\;(C)$. 2. The mean hearing threshold levels by service years in the 4,000 Hz were intensively increased from 1st to 3rd year and slightly decreased. than that of 3rd year, from after 3rd to 5th year, after 5th year that increased slightly. 3. The mean hearing threshold levels by frequencies were highest in the 4,000 Hz(male: $25.0{\pm}11.3dB$, female: $22.0{\pm}10.2dB$) and followed by 6,000, 8,000 and 3,000 Hz. 4. The mean hearing threshold level of the 6,000 Hz (male: 17.0 dB. female: 17.9dB) was higher than that of 4,000Hz (male: 16.4 dB, female: 17.1dB) in tile 1st service year. 5. The mean hearing loss of examinees was $16.2{\pm}8.0dB$ in male and $15.4{\pm}7.8dB$ in female.

  • PDF

EM 시뮬레이터를 이용한 LNA 설계 (Design of LNA Using EM simulator)

  • 최문호;김영석;정성일;이한영;장석환;이종악
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2005년도 추계종합학술대회
    • /
    • pp.873-876
    • /
    • 2005
  • A low noise amplifier(LNA) using electro-magnetic field simulator is designed in standard 0.25um CMOS process. Integrated spiral inductor is simulated using EM field solver. Then LNA is simulated with active device, capacitor and simulated inductor by EM field solver. A S11 and S21 of -15.45dB and 17.8dB at 2.3GHz as simulation results was achieved. A Noise Figure is 2.92dB. And Measurements show a S11 and S21 of -12.4dB and 17.8dB at 2.3GHz. A Noise Figure of 3.3dB was achieved.

  • PDF

공장소음으로 인한 화재 경보음 인지 영향정도에 관한 연구 (A study on Noise Generation and Awareness of the Fire Alarm Sound in the Factory)

  • 이영삼
    • 대한안전경영과학회지
    • /
    • 제17권4호
    • /
    • pp.97-103
    • /
    • 2015
  • The people who are in the noise factory are difficult to hear and recognize about fire and to evacuate quickly when a fire occurs. This study was conducted to analyze workplace's background noise of 31 factories in Incheon and to know the workplace noise level comparing to fire alarm sound level. The measured average noise level was 96.8dB(A). Noise level of measured result was exceeded as 6.8dB(A) comparing to NFSC (National Fire Safety Code) noise level of 90dB. NFPA suggests that when background noise exceeds 85dB or more than that, other methods should be considered to know alarm sound. Also fire alarm sound should exceed more than 15dB(A) comparing to background noise level. Therefore it was concluded that the design of the fire alarm systems should not be applied to the workplace without considering background noise and it needs to be improved with regulations and the systems.