• YAKHAK HOEJI
• /
• v.43 no.3
• /
• pp.294-299
• /
• 1999

From the water fraction of the MeOH extract, three compounds, 1,3,4,5-terrahydroxycyclo-hexanecarboxylic acid 3-(3,4-dihydroxycinnamate) (chlorogenic acid), $quercetin 3-O-{\beta}-D-galactopyranoside(hyperoside)$, and 1 (R)-hydroxy-3,4-seco-lup-4(23), 20(30)-dien-3,$11{\alpha}-olactone-{\alpha}-L-rhamnopyrnaosy(1{\rightarrow}4)-{\beta}-D-glucopyanosy(1{\rightarrow}6)-{\beta}-L-glucopyrnaosyl$ ester (chiisanoside) were isolated and their strutures determinated by $^1H-NMR,{\;}^{13}C-NMR$, IR, and FAB-Mass. Chlorogenic acid and Chiisanoside had been quantitated by HPLC from eight Acanthopanax species per 10 g A. koreanum 19.82, 4.17 mg, A. nambunensis 65.00, 1.86mg, A. chiisanense 27.19, 8.17mg, A. sessiliflorum 7.49, 5.88 mg.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.3 s.120
• /
• pp.207-212
• /
• 2007

Community noise has been great concerned in public. The traffic noise in seoul, especially has been growing awareness for the quiet living environment. In this paper, the effect on the noise barrier in order to reduce highway noise near on the street has been examined. First barriers have been evaluated at 5 locations in the city. The evaluation is performed before and after construction, with the reference point which does not affected on road traffic volume. Then, noise reducers mounted on the harriers also have been examined. the result shows that it reduces noise level by $3{\sim}3.5dB(A)$ with a standard deviation of 2.8 dB(A).

• Journal of Magnetics
• /
• v.17 no.3
• /
• pp.163-167
• /
• 2012

The effects on the ferromagnetism of the O or Zn defect in Cu-doped ZnO with the concentration of 2.77-8.33% have been investigated by the first-principles calculations. The Cu doping in ZnO was calculated to be a kind of p-type ferromagnetic half-metals. When the Zn vacancy exists in Cu-doped ZnO, the Cu magnetic moment increases, while for the O vacancy it is reduced. It is noticeable that the ferromagnetic state was originated from the hybridized O(2p)-Cu(3d)-O(2p) chain formed through the p-d coupling. The carrier-mediated ferromagnetism by nitrogen or fluorine does not depend on their concentration.

• Restorative Dentistry and Endodontics
• /
• v.49 no.2
• /
• pp.17.1-17.8
• /
• 2024

Objectives: This study evaluated the effect of serum calcium, parathyroid hormone (PTH), vitamin D, and uric acid levels on pulp stone formation. Materials and Methods: Patients who were admitted to the Muğla Sıtkı Koçman University, Faculty of Dentistry, Department of Oral and Maxillofacial Radiology for dental complaints were registered. Among these patients, individuals who had routine biochemical tests at the same period in the Outpatient Clinics of Muğla Sıtkı Koçman University Training and Research Hospital were included in the study. The patients with at least 1 pulp stone on panoramic radiographs recorded as the "pulp stone group" while patients without any pulp stones were the "control group". Demographic data and serum levels of calcium, PTH, vitamin D, and uric acid were retrospectively evaluated in both groups. Student t-test or Mann-Whitney U test was used to evaluate the differences between the groups. Results: Among 151 patients, dental pulp stone was detected in 53.6% of patients, and 82.7% of these patients were female. Female sex and pulp stone formation were significantly associated (p = 0.001). The mean age of the pulp stone group was 43.9, while it was 39.9 in the control group, without any significant correlation between age and pulp stone (p > 0.05). Similarly, there were no significant differences in serum levels of PTH, vitamin D, uric acid and calcium between groups (p > 0.05). Conclusions: According to the present study, the effect of dental factors rather than systemic factors should be considered primarily in pulp stone formation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.17-22
• /
• 2009

A switch or circulator is used for distinguishing between the paths of transmitter and receiver in TDD systems. If the isolation between Tx and Rx paths is low in TDD systems, the output signal of the ransmitter acts as an interferer to the receiver even if the transceiver operates on the receiver mode. In this paper we propose a method to get high isolation characteristics between transmitting and receiving paths in TDD systems. We implement the module with a proposed improving method to verify the effect of the isolation improvement and the experimental results are presented. The isolation improvement of above 44.8 dB over the frequency bandwidth of 30 MHz is obtained from the implemented isolation improvement module.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.355-362
• /
• 2013

A hardware implementation of phase calculator for extracting 3D depth image from TOF(Time-Of-Flight) sensor is described. The designed phase calculator, which adopts a pipelined architecture to improve throughput, performs arctangent operation using vectoring mode of CORDIC algorithm. Fixed-point MATLAB modeling and simulations are carried out to determine the optimized bit-widths and number of iteration. The designed phase calculator is verified by FPGA-in-the-loop verification using MATLAB/Simulink, and synthesized with a TSMC 0.18-${\mu}m$ CMOS cell library. It has 16,000 gates and the estimated throughput is about 9.6 Gbps at 200Mhz@1.8V.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.177-182
• /
• 2013

In this paper, printed antenna which can be applied to a built-in wireless module of the security controller operating at global positioning system(GPS) L1 frequency band(1.575GHz) is proposed. The proposed antenna is basically composed of a microstrip patch antenna with inserting feed. In particular left and right slots which are respectively asymmetric are used for impedance matching, whereas slot with one open-end and shorting point are used on the bottom plane to set operating frequency and enhance bandwidth. It is observed at the desired GPS L1 frequency band that the radiation efficiency and gain of the proposed antenna are 90% and more than 4.8dBi respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.492-498
• /
• 2017

In this paper, we integrate a divide-by-3 injection-locked frequency divider (ILFD) in CMOS technology with a $0.18-{\mu}m$ BiCMOS process. We propose a self-injection technique that utilizes harmonic conversion to improve the locking range, phase-noise, and input sensitivity simultaneously. The proposed self-injection technique consists of an odd-to-even harmonic converter and a feedback amplifier. This technique offers the advantage of increasing the injection efficiency at even harmonics and thus realizes the low-power implementation of an odd-order division ILFD. The measurement results using the proposed self-injection technique show that the locking range is increased by 47.8% and the phase noise is reduced by 14.7 dBc/Hz at 1-MHz offset frequency with the injection power of -12 dBm. The designed divide-by-3 ILFD occupies $0.048mm^2$ with a power consumption of 18.2-mW from a 1.8-V power supply.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.552-560
• /
• 2017

This paper presents a transceiver chipset realized in a $0.13-{\mu}m$ CMOS technology for serial digital interface of video data transmission, which compensates the electrical cable loss of 45 dB in maximum at 1.5 Gbps. For the purpose, the TX equips pre-emphasis in the main driver by utilizing a D-FF with clocks generated from a wide-range tuning PLL. In RX, two-stage continuous-time linear equalizers and a limiting amplifier are exploited as a front-end followed by a 1/8-rate CDR to retime the data with inherent 1:8 demultiplexing function. Measured results demonstrate data recovery from 270 Mbps to 1.5 Gbps. The TX consumes 104 mW from 1.2/3.3-V supplies and occupies the area of $1.485mm^2$, whereas the RX dissipate 133 mW from a 1.2-V supply and occupies the area of $1.44mm^2$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.8
• /
• pp.830-834
• /
• 2004

In this study, lead-free pirzoelectric ceramics were investigated for pressure sensor applications as a function of the amount of ${La}_2{O}_3$ addition at $Bi(Na, K)Ti{O}_3-SrTi{O}_3$system. With increasing the amount of addition, the density and dielectric constant increased up to 0.9 wt% ${La}_2{O}_3$ addition and decreased above 0.9 wt% ${La}_2{O}_3$addition. Electromechanical coupling factor( $K_{P}$) showed the maximum value at 0.2 wt% ${La}_2{O}_3$addition and decreased above 0.2 wt% ${La}_2{O}_3$ addition. Electromechanical coupling $factor{(K)}_P$, density, dielectric constant$(\varepsilon_\Gamma)$, piezoelectric constant$(d_33)$ and curie temperature$(T_C)$ showed optimum value of 0.40, 5.75 g/㎤, 768, 215 pC/N and 320 $^{\circ}C$ at 0.2 wt%${La}_2{O}_3$addition, respectively.