• Title/Summary/Keyword: D6

Search Result 29,535, Processing Time 0.059 seconds

Design of Double Bond Down Converting Mixer Using Embeded Balun Type (발룬 내장형 이중대역 하향 변환 믹서 설계 및 제작)

  • Lee, Byung-Sun;Roh, Hee-Jung;Seo, Choon-Weon
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.22 no.6
    • /
    • pp.141-147
    • /
    • 2008
  • This paper describes the design of frequency down converting Mixer in the receiver to use compound semiconductor and CMOS product process. The basic theory and structure of frequency down converting Mixer is surveyed, and we design mixer circuit with active balun which use the compound semiconductor and CMOS process. This mixer convert a single ended signal to differential signal at input port of RF and LO instead of matching circuit to get dual band balanced mixer structure and characteristic broadband. This designed mixer has a conversion gain $-1{\sim}-6[dB]$ at $2{\sim}6[GHz]$ bandwidths. However, the simulation of the designed mixer with active balun has the result of a 7[dB] conversion gain for -2[dBm] LO input power and -10[dBm] input P1[dB] at 5.8[GHz].

Effect of Molecular Weight of Chitosan on Flocculation of Suspended Solids in Rhodamine 6G-Sodium Dodecyl Sulfate System (키토산 분자량에 따른 Rhodamine 6G-Sodium Dodecyl Sulfate계의 응집효과에 관한 연구)

  • Kim, Sung Hyun;Nah, Jae Woon;Oh, Jeong Sun;Song, Ki Dong
    • Journal of the Korean Chemical Society
    • /
    • v.42 no.6
    • /
    • pp.672-678
    • /
    • 1998
  • Chitin was extracted from crab shell of Portuns triberculatus and deacethylated to yield chitosan with various molecular weights. The absorption and the fluorescence spectra of Rhodamine 6G(Rh 6G)-sodium dodecyl sulfate(SDS) and Rh 6G-chitosan systems were obtained. From the spectra, we observed that the absorption and the fluorescence intensity of Rh 6G-SDS system decreased when S/D(the concentration of SDS to that of Rh 6G ratio) was below or at 32, while they increased when S/D was above 32. From the suspended solid(SS) removal rate and the transmittance of Rh 6G-SDS-chitosan system, we found that when S/D ratio was 32 its flocculating behaviour was much stronger than Rh 6G-SDS system. As the concentration and the molecular weight of chitosan increased, we also found that S/D range was extended from 32 to 100. With increasing the molecular weight of chitosan, the SS removal rate increased around pH 2~9 but decreased remarkably at pH>12.

  • PDF

The Study on Multi-band Mixer for Adaptive Radar (적응형 레이다를 위한 다중대역 혼합기에 관한 연구)

  • Go, Min-Ho;Kang, Se-Byeok
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.16 no.6
    • /
    • pp.1053-1058
    • /
    • 2021
  • This paper presents the multi-band mixer which converts a X-, K- and Ka-band adaptively by adjusting the gate-bias voltage of an active device. The proposed mixer presented a conversion loss of -10 dB at -0.8 V gate-bias voltage for X-band, a conversion loss of -9 dB at -0.3 V gate-bias voltage for K-band and for Ka-band, a conversion loss of -7 dB at -0.2 V gate-bias voltage under the LO power of +6.0 dBm. The 1dB compression point (P1dB) is +0.5 dBm for all band.

Effect of Nutrient Solution Strength on Growth, Fruit Quality and Yield of Strawberry 'Ssanta' in Hydroponics (배양액의 농도가 딸기 '싼타'의 생육, 수량 및 과실의 품질에 미치는 영향)

  • Jun, Ha Joon;Byun, Mi Soon;Liu, Shi Sheng;Jeon, Eui Hwan;Park, So Deuk;Chae, Jang Hee
    • Journal of Bio-Environment Control
    • /
    • v.21 no.3
    • /
    • pp.192-198
    • /
    • 2012
  • Experiments were conducted to investigate the optimum concentration of nutrient solution in hydroponics for strawberry 'Ssanta' bred at Gyongsangbuk-do Agricultural Research & Extension Services. Nutrient solutions for strawberry, which made by Yamazaki, were supplied EC (Electrical Conductivity) 0.6, 0.8, 1.2, and $1.8dS{\cdot}m^{-1}$ after planting on cocopeat medium during experiment period. Growth of shoot of strawberries did not show statistical differences among treatments. Fruit length showed the longest in EC $0.8dS{\cdot}m^{-1}$ in all clusters. In the second flower cluster, fruit length showed longer in EC 0.8 and $1.2dS{\cdot}m^{-1}$ than EC 0.6 and $1.8dS{\cdot}m^{-1}$. In the third flower cluster, it showed the longest in EC 0.8 and $1.2dS{\cdot}m^{-1}$, followed by 0.6 and $1.8dS{\cdot}m^{-1}$. The longest was in EC $0.8dS{\cdot}m^{-1}$ and the shortest in EC $1.8dS{\cdot}m^{-1}$ in the fourth flower cluster. Fruit diameter did not show significant differences among treatments, but longest in EC 0.8 and $1.2dS{\cdot}m^{-1}$ in all clusters. The heaviest mean fruit weight appeared in EC $0.8dS{\cdot}m^{-1}$ in all flower clusters. And heavier in EC $1.2dS{\cdot}m^{-1}$ in the second and third clusters. Also the weight was significantly light in plants grown in EC 0.6 and $1.8dS{\cdot}m^{-1}$ in the second and third cluster. Soluble solids of fruit was the highest in EC $0.6dS{\cdot}m^{-1}$ in all clusters. As the results, we came to the conclusion that the optimum EC for strawberry 'Ssanta' was EC $0.8{\sim}1.2dS{\cdot}m^{-1}$ in this experiment.

A Remote Control of 6 d.o.f. Robot Arm Based on 2D Vision Sensor (2D 영상센서 기반 6축 로봇 팔 원격제어)

  • Hyun, Woong-Keun
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.17 no.5
    • /
    • pp.933-940
    • /
    • 2022
  • In this paper, the algorithm was developed to recognize hand 3D position through 2D image sensor and implemented a system to remotely control the 6 d.o.f. robot arm by using it. The system consists of a camera that acquires hand position in 2D, a computer that controls robot arm that performs movement by hand position recognition. The image sensor recognizes the specific color of the glove putting on operator's hand and outputs the recognized range and position by including the color area of the glove as a shape of rectangle. We recognize the velocity vector of end effector and control the robot arm by the output data of the position and size of the detected rectangle. Through the several experiments using developed 6 axis robot, it was confirmed that the 6 d.o.f. robot arm remote control was successfully performed.

Effect of Dietary Lipid Sources on Growth, Enzyme Activities and Immuno-hematological Parameters in Catla catla Fingerlings

  • Priya, K.;Pal, A.K.;Sahu, N.P.;Mukherjee, S.C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.18 no.11
    • /
    • pp.1609-1616
    • /
    • 2005
  • Ninety advanced Catla catla fingerlings (av. wt. 16 g) were randomly distributed in six treatment groups with three replicates each for an experimental period of 60 days to study the effect of dietary lipid source on growth, enzyme activities and immuno-hematological parameters. Six isoprotein (40.0-41.9%) and isocaloric (4,260 kcal $kg^{-1}$) semi-purified diets were prepared with varying levels of soybean oil (SBO) and cod liver oil (CLO) within a total of 8% lipid viz., $D_1$ (Control), $D_2$ (8% SBO), $D_3$ (6% SBO and 2% CLO), $D_4$ (4% SBO and 4% CLO), $D_5$ (2% SBO and 6% CLO) and $D_6$ (8% CLO). Highest SGR was noted in $D_5$ (0.73${\pm}$0.03) group, which was similar with $D_3$ (0.71${\pm}$0.02) and $D_4$ (0.69${\pm}$0.01) groups. Activity of intestinal lipase, hepatic glucose-6-phosphate dehydrogenase (G6PDH) and aspartate amino transferase (AST) of the lipid treatment groups were significantly higher (p<0.05) than the control group. The respiratory burst activity of the phagocytes (Nitroblue tetrazolium (NBT)) was highest in $D_2$ (1.95${\pm}$0.21) followed by $D_3$ (1.19${\pm}$0.15) group, which were significantly (p<0.05) higher than the other groups. Globulin level was significantly higher in $D_3$ (1.29${\pm}$0.08) than in the other groups expect $D_4$. Hemoglobin content and total erythrocyte count did not show any significant difference. From this study, it is concluded that a diet containing 6% soybean oil and 2% cod liver oil ($D_3$) yields higher growth and immune response in Catla catla fingerlings and would be cost effective.

Dosimetric comparison of axilla and groin radiotherapy techniques for high-risk and locally advanced skin cancer

  • Mattes, Malcolm D.;Zhou, Ying;Berry, Sean L.;Barker, Christopher A.
    • Radiation Oncology Journal
    • /
    • v.34 no.2
    • /
    • pp.145-155
    • /
    • 2016
  • Purpose: Radiation therapy targeting axilla and groin lymph nodes improves regional disease control in locally advanced and high-risk skin cancers. However, trials generally used conventional two-dimensional radiotherapy (2D-RT), contributing towards relatively high rates of side effects from treatment. The goal of this study is to determine if three-dimensional conformal radiation therapy (3D-CRT), intensity-modulated radiation therapy (IMRT), or volumetric-modulated arc therapy (VMAT) may improve radiation delivery to the target while avoiding organs at risk in the clinical context of skin cancer regional nodal irradiation. Materials and Methods: Twenty patients with locally advanced/high-risk skin cancers underwent computed tomography simulation. The relevant axilla or groin planning target volumes and organs at risk were delineated using standard definitions. Paired t-tests were used to compare the mean values of several dose-volumetric parameters for each of the 4 techniques. Results: In the axilla, the largest improvement for 3D-CRT compared to 2D-RT was for homogeneity index (13.9 vs. 54.3), at the expense of higher lung $V_{20}$ (28.0% vs. 12.6%). In the groin, the largest improvements for 3D-CRT compared to 2D-RT were for anorectum $D_{max}$ (13.6 vs. 38.9 Gy), bowel $D_{200cc}$ (7.3 vs. 23.1 Gy), femur $D_{50}$ (34.6 vs. 57.2 Gy), and genitalia $D_{max}$ (37.6 vs. 51.1 Gy). IMRT had further improvements compared to 3D-CRT for humerus $D_{mean}$ (16.9 vs. 22.4 Gy), brachial plexus $D_5$ (57.4 vs. 61.3 Gy), bladder $D_5$ (26.8 vs. 36.5 Gy), and femur $D_{50}$ (18.7 vs. 34.6 Gy). Fewer differences were observed between IMRT and VMAT. Conclusion: Compared to 2D-RT and 3D-CRT, IMRT and VMAT had dosimetric advantages in the treatment of nodal regions of skin cancer patients.

The Analysis of Interdigital Bandpass Filter for K-band (K대역용 인터디지털 대역통과 필터분석)

  • 심재우;이영철;김영진
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2000.10a
    • /
    • pp.186-189
    • /
    • 2000
  • In this paper, we have designed a bandpass filter to apply the downconverter of the K-band Mu-hung-hwa satellite. To pass only the 25-30% of the bandwidth at the center frequency of 19.6GHz, we have designed a six-order interdigital bandpass filter using microstrip lines. Simulation result of optimization show that insertion loss is -0.275dB and reflection coefficient is -20.95dB at the passband frequency. measurement is determined center frequency, 19.150Hz, insertion loss, -4.1dB, input reflection coefficient. -l5dB and output reflection coefficient -l6dB.

  • PDF

Experimental Study on Transformation of IPF and Pressure Drop in Branches with Ice Slurry (아이스슬러리의 분기관내 압력손실과 IPF 변화에 관한 실험적 연구)

  • 박기원;최현웅;노건상;정재천
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.27 no.2
    • /
    • pp.272-279
    • /
    • 2003
  • This study aimed to understand the effects of transporting ice slurry Particles through Pipes with branches. The experimental apparatus was constructed as ice slurry mixing tank. vortex pump, manometers for differential pressure measuring. IPF(ice packing factor) measuring instruments and branches as test sections. The experiments were carried out under various conditions. with concentration of water solution ranging between 0∼20wt% and velocity of water solution at the entry ranging between 1.5∼2.5m/s. The differential Pressure and IPF between the pipe entry and exit were measured. and flowing form was checked throughout the experiment. The pressure loss in 3d branches appeared compared with 6d branches so that it was very high. In the pressure loss of the inside and outside of branches. 6d branches was showed the difference. but was agreed in 3d branches The pressure loss according to concentration of water solution, low value appeared at 10wt% in 6d branches, at 20wt% in 3d branches. The pressure loss according to velocity, did not show large difference. The change of IPF at outlet, appeared +15∼-25% in 6d branches and 0∼-20% in 3d branches. The difference of IPF at the inside and outside of branches. appeared 10∼15% in 6d branches and maximum 5% in 3d branches.

Structure Determination of Sucrose by Acetylation and Acid Hydrolysis

  • Min, Hee-Jeong;Lee, Tae-Seong;Bae, Young-Soo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.42 no.2
    • /
    • pp.183-192
    • /
    • 2014
  • For the structure determination of D-(+)-sucrose, which consists of ${\alpha}$-D-(+)-glucose and ${\beta}$-D-(+)-fructose, it was acetylated with acetic anhydride and triethyl amine, pyridine, zinc chloride, and sodium acetate as catalysts. The acetylated D-(+)-sucrose was acid-hydrolyzed using sulfuric acid and sodium chloride in methanolic solution. The structures of the reaction products were determined by $^1H$-NMR and $^{13}C$-NMR spectra. The yield of the acetylation indicated the high value in zinc chloride as 70% in zinc chloride catalyst. The acid-hydrolyzed product of the acetylated D-(+)-sucrose, 2,3,4,6,1',3',4',6'-octa-O-acetyl-D-(+)-sucrose, gave 2,3,4,6-tetra-O-acetyl-${\beta}$-D-(+)-glucose and it suggests that the acetylated D-(+)-sucrose was rearranged through the formation of oxonium ion by mutarotation in the 2,3,4,6-tetra-O-acetyl-${\alpha}$-D-(+)-glucose moiety and through the ring opening in the 1',3',4',6'-tetra-O-acetyl-${\beta}$-D-(+)-fructose moiety.