• Journal of the Korean Mathematical Society
• /
• v.43 no.4
• /
• pp.859-869
• /
• 2006

Let {$X,\;X_n;n\;{\geq}\;1$} be a sequence of ${\imath}.{\imath}.d.$ random variables which belong to the attraction of the normal law, and $X^{(1)}_n,...,X^{(n)}_n$ be an arrangement of $X_1,...,X_n$ in decreasing order of magnitude, i.e., $\|X^{(1)}_n\|{\geq}{\cdots}{\geq}\|X^{(n)}_n\|$. Suppose that {${\gamma}_n$} is a sequence of constants satisfying some mild conditions and d'($t_{nk}$) is an appropriate truncation level, where $n_k=[{\beta}^k]\;and\;{\beta}$ is any constant larger than one. Then we show that the conditionally trimmed sums obeys the self-normalized law of the iterated logarithm (LIL). Moreover, the self-normalized LIL for conditionally censored sums is also discussed.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.623-626
• /
• 2002

The object of present study is to find the flow characteristics of centrifugal turbomachinery according to the volute shape change. The experiments were carried out for two model; volute-A designed by free vortex conditions and volute-B designed for use in high mass flow rate conditions using the volute-A test results, Flow measurements were taken in shrouded impeller with 12 backward type blades by using a five-hole pilot-tube and carried out in 4 flow rate, $Q/Q_d\;=0,43,\;1.0,\;1.27,\;1,47$, respectively, For volute-B, we found that pressure distribution was more uniform at high flow rate and from $Q/Q_d\;:\;0,43\;to\;Q/Q_d\;:\;1,20$, losses decreased and efficiency increased compare with volute-A.

• Journal of the Korean Mathematical Society
• /
• v.43 no.6
• /
• pp.1357-1369
• /
• 2006

It is known that if C is an [24m + 2l, 12m + l, d] selfdual binary linear code with $0{\leq}l<11,\;then\;d{\leq}4m+4$. We present a sufficient condition for the nonexistence of extremal selfdual binary linear codes with d=4m+4,l=1,2,3,5. From the sufficient condition, we calculate m's which correspond to the nonexistence of some extremal self-dual binary linear codes. In particular, we prove that there are infinitely many such m's. We also give similar results for additive self-dual codes over GF(4) of length n=6m+1.

• Journal of the Korean Ceramic Society
• /
• v.43 no.4 s.287
• /
• pp.220-223
• /
• 2006

BLT nanotubes were synthesized by using simple and convenient method template-wetting process. Porous alumina membranes were prepared by 2 step anodic oxidation as the template. To improve wetting properties and make low surface energy, BLT solution was mixed with polymer. Polymer was removed completely during annealing. After completely etching the template in 30 wt% KOH solution, we demonstrate that BLT nanotubes with a diameter of 200 nm can be fabricated. Grain growth process of BLT nanotubes during baking, and furnace annealing was examined by FE-SEM and XRD.

• YAKHAK HOEJI
• /
• v.43 no.4
• /
• pp.423-428
• /
• 1999

Two polysaccharides, ACP-UMP and ACP-ULF, were purified from the aerial part of Artemisia capillaris by anion-exchange chromatography, ultrafiltration, and gel filtration chromatography. The polysaccharides appeared to be homogenious from the results of HPLC. The molecular weights of ACP-UMF and ACP-ULF were estimated to be 16305.92 D and 3292.26 D, respectively, by MALDI-TOF MS. The sugar compositions were determined by GC to be arabinose 10.05%, xylose 1.67%, mannose 5.45G, galactose 39.06%, glucose 15.43% for ACP-UMF and arabinose 11.60%, xylose 11.15%, mannose 6.37% galactose 32.47%, glucose 18.35% for ACP-ULF. A polysaccharide, SP-M was determined to be 2462.52 D by MALDI-TOF MS. SP-M consisted mainly of rhamnose 36.49%, arabinose 29.00%, and glucose 19.38%. Incubation of CCl4-intoxicated hepatocytes with ACP-UMF reduced the levels of glutamic pyruvic transaminase (GPT) and cellular malondialdehyde (MDA) to 62.8% and 23.8%. ACP-ULF also reduced the levels of GPT and MDA to 46.1% and 38.1% and 26.3%, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.698-705
• /
• 2010

A vehicle antenna for AM, FM, TDMB, GPS systems was designed and implemented. Omnidirectional AM antenna was designed by ferrite turn style antenna. For the FM and TDMB antenna, folded monopole antenna which helical is folded was applied. GPS antenna for the bandwidth achievement was designed by trapezoidal microstrip patch that has air substrate. Receiving signal strengths by the measurement were presented for the AM, FM and TDMB antenna. AM signal strength was -65.7 dBm, this strength is almost as same conventional pole antenna as -63.4 dBm. It can be replaced conventional pole or glass antenna by the studied antenna. Signal strengths for FM and TDMB were -55.66 and -43.50 dBm at center frequency, they are 5~10 dB higher than conventional antenna. Measurements of bandwidth and gain for the GPS antenna showed 135 MHz under VSWR 2 : 1 and 4.31 dBi, gains over GPS band were 3~5 dB higher than ceramic patch antenna.

• Journal of KIISE
• /
• v.43 no.3
• /
• pp.353-361
• /
• 2016

During image-guided radiation treatment of lung cancer patients, it is necessary to track the tumor motion because it can change during treatment as a consequence of respiratory motion and cardiac motion. In this paper, we propose a method for tracking the motion of the lung tumors based on the three-dimensional image information from planning 4D MDCT and treatment 4D CBCT images. First, to effectively track the tumor motion during treatment, the global motion of the tumor is estimated based on a tumor-specific motion model obtained from planning 4D MDCT images. Second, to increase the accuracy of the tumor motion tracking, the local motion of the tumor is estimated based on the structural information of the tumor from 4D CBCT images. To evaluate the performance of the proposed method, we estimated the tracking results of proposed method using digital phantom. The results show that the tumor localization error of local motion estimation is reduced by 45% as compared with that of global motion estimation.

• Journal of radiological science and technology
• /
• v.43 no.1
• /
• pp.9-14
• /
• 2020

Commercial plate bolus is generally used for treatment of surface tumor and required surface dose. We fabricated 3D-printed bolus by using 3D printing technology and usability of 3D-printed bolus was evaluated. RT-structure of contoured plate bolus in the TPS was exported to DICOM files and converted to STL file by using converting program. The 3D-printed bolus was manufactured with rubber-like translucent materials using a 3D printer. The dose distribution calculated in the TPS and compared the characteristics of the plate bolus and the 3D printed bolus. The absolute dose was measured inserting an ion chamber to the depth of 5 cm and 10 cm from the surface of the blue water phantom. HU and ED were measured to compare the material characteristics. 100% dose was distributed at Dmax of 1.5 cm below the surface when was applied without bolus. When the plate bolus and 3D-plate bolus were applied, dose distributed at 0.9 cm and 0.8 cm below the surface of the bolus. After the comparative analysis of the radiation dose at the reference depth, differences in radiation dose of 0.1 ~ 0.3% were found, but there was no difference dose. The usability of the 3D-printed bolus was thus confirmed and it is considered that the 3D-printed bolus can be applied in radiation therapy.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.105-113
• /
• 2009

In this paper, a vehicle antenna for AM, FM, TDMB, GPS systems was designed and implemented. AM antenna loaded into small space of shark shape was designed by ferrite turn style antenna. For the FM and TDMB antenna, folded monopole antenna which helical is folded was applied. GPS antenna for achieving characteristics both bandwidth and gain improvement was designed microstrip patch that has air substrate and fractal structure. Receiving signal strengths by the measurement were presented for the AM, FM and TDMB antenna. AM signal strength was -65.7dBm, this strength is almost as same conventional pole antenna as -63.4dBm. It can be replaced conventional pole or glass antenna by the studied antenna. Signal strengths for FM and TDMB were -55.66 and -43.50dBm at center frequency, they are 5~10dB higher than conventional antenna. Measurements of bandwidth and gain for the GPS antenna showed 135 MHz under VSWR 2 : 1 and 4.31dBi, gains over GPS band were 3~5dB higher than ceramic patch antenna.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1986.06a
• /
• pp.42-43
• /
• 1986