• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1310-1314
• /
• 2018

Non-Maxwellian distributions are found in the laboratory and space plasmas. For an accurate study of plasmas, the Kappa-averaged collision strengths of silicon VIII ion for $4^0S_{3/2}-2^0D_{3/2}$, $4^0S_{3/2}-2^0D_{5/2}$ and $2^0D_{3/2}-2^0D_{5/2}$ transitions are calculated for Kappa distributions with ${\kappa}=2$, 3 and 5 and for temperatures from $10^{4.5}K$ to $10^{6.5}K$. Results indicate that significant differences occur between the averaged collision strengths for the Maxwellian and the Kappa distributions. Fuythermore, and for each ${\kappa}$ value, the Kappa-averaged collision strengths vary in a complicated way with temperature for the $4^0S_{3/2}-2^0D_{3/2}$ and $4^0S_{3/2}-2^0D_{5/2}$ transitions while they decrease with increasing temperature for the $2^0D_{3/2}-2^0D_{5/2}$ transition. The calculation is significant if plasmas are to be studied for a non-Maxwellian distribution.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.12
• /
• pp.41-46
• /
• 2008

We report a high gain D-band(110 - 140 GHz) MMIC drive amplifier based on $0.1{\mu}m$ InGaAs/InAlAs/GaAs metamorphic HEMT technology. The amplifier shows an excellent $S_{21}$ gain characteristic greater than 10 dB in a millimeterwave frequency of 110 GHz, Also the amplifier has good reflection characteristics of a $S_{11}$ of -3.5 dB and a $S_{22}$ of -6.5 dB at 110 GHz, respectively The high performances of the MMIC drive amplifier is mainly attributed to the characteristics of the MHEMTs exhibiting a maximum transconductance of 760 mS/mm, a current gain cut-off frequency of 195 GHz and a maximum oscillation frequency of 391 GHz.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.225-234
• /
• 2008

This study was carried out to select proper loading speed for deformation strength ($S_D$) of asphalt mixtures. Kim test using loading head of diameter(40mm) with radius(10mm) was conducted to measure $S_D$ in different loading speed (10mm/min, 30mm/min, 50mm/min, 70mm/min) and wheel tracking test was also conducted. The regression analyses between the So values and WT results were carried out by loading speeds. Higher $S_D$ was observed as increasing loading speed. This means that loading speed is a high influencing factor on $S_D$. The loading speed of 30mm/min was found as an optimum for better correlation with WT results than any other speeds from the regression analysis between $S_D$ and wheel tracking test results. $S_D$ value measured at other loading speed than 30mm/min has to apply the conversion coefficients.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.716-717
• /
• 2023

최근 자율주행 기술이 큰 주목을 받고 있지만 고가의 센서를 필요로 하기 때문에 연구 및 상용화에 큰 어려움을 겪고 있다. 따라서 본 논문은 쉽게 사용 가능한 딥러닝 2D 객체 인식 모델과 범용 태블릿에 탑재된 저비용 LiDAR 센서를 이용하여 실시간 3D 객체 탐지가 가능한 시스템을 개발한다. 개발된 시스템을 실제 1/10 크기의 차량 모델에 적용하여 테스트해본 결과 개발 용이성과 정확도 측면에서 자율주행을 위한 저비용 센서로 충분히 활용될 가능성이 있음을 확인하였다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.4
• /
• pp.207-215
• /
• 2002

Changes in salinity, hydraulic conductivity and penetration resistance in a reclaimed tidal land reclaimed in 1986 were studied. The salinity monitoring based on electrical conductivity of saturated extract, ECe, was conducted from 1994, when the land use for experimental crop production started after tile drainage. The site was abandoned since 1999. The hydraulic conductivity was measured by a sand fill auger hole method, and the resistance was measured with a dynamic penetrometer in situ. The averaged ECe in 1994 was $33.7dS\;m^{-1}$ ranging from 25.5 to $44.8dS\;m^{-1}$, and was decreased to $25.7dS\;m^{-1}$ with large range from 0.8 to $70.3dS\;m^{-1}$ before experiment was $1.89{\times}10^{-7}m\;s^{-1}$. It increased to $1.32{\times}10^6m\;s^{-1}$ in the top 20-cm soil with large variability, while it showed $3.44{\times}10^7m\;s^{-1}$ beneath the 20-cm soil depth with less variability. The penetration resistance of the soil ranged from 0.05 to 9.99MPa. The vertical distribution of penetration resistance indicated the hardened layer was developed at the depth of 20~40 cm where the hydraulic conductivity was sharply decreased.

• Korean Journal of Weed Science
• /
• v.16 no.1
• /
• pp.36-41
• /
• 1996

The experiments were conducted to identify the herbicidal effect of 2,4-D{ (2,4-dichlorophenoxy) acetic acid}, 2,4-D ethylester {ethyl 2,4- dichlorophenoxy acetate} and bentazon{3- isopropyl-1H-2,1,3- benzothiazin- 4-(3H)one 2,2-dioxide} on Sagittaria trifolia. Both 2,4-D and 2,4-D ethylester could completely control S. trifolia when applied before 80 days after transplanting of the tubers (DAT), but the weeding effect by bentazone decreased when applied after 60 DAT. 2,4-D and 2,4-D ethylester were effectively translocated from the treated parts to growing point. They killed S. trifolia completely when applied at 80 DAT under 3cm standing water depths, but the controlling effect by bentazone decreased at deeper than 1cm standing water depth. Formation of S. trifolia tuber was effectively suppressed with 2,4-D at 7g ai/10a and 2,4-D ethylester at 6g ai/10a when applied 60 DAT.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5253-5270
• /
• 2016

With device-to-device (D2D) communications, an inactive user terminal can be utilized as a relay node to support multi-hop communication so that connective experience of the cell-edge user as well as the capacity of the whole system can be significantly improved. In this paper, we investigate the spectrum sharing for a cooperative relay assisted D2D communication underlying a cellular network. We formulate a joint relay selection and channel assignment problem to maximize the throughput of the system while guaranteeing the quality of service (QoS) requirements of cellular users (CUs) and D2D users (DUs). By exploiting coalition formation game theory, we propose two algorithms to solve the problem. The first algorithm is designed based on merge and split rules while the second one is developed based on single user's movement. Both of them are proved to be stable and convergent. Simulation results are presented to show the effectiveness of the proposed algorithms.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.5
• /
• pp.355-363
• /
• 2009

Double cropping system of oilseed crops introduced rape and castor bean was studied in the newly reclaimed tidal land of Korea. Surface soil EC to reach at 50% of growth reduction to the tallest height of crops was estimated $4dS\;m^{-1}$ for castor bean and $6dS\;m^{-1}$ for rape by logarithmic function. The castor bean cultivated during rainy summer much more suffered serious growth and yield reduction by flooding damage in the Hwaong and Yeonsangang reclaimed lands having low soil conductivity and finer textured soil than in the Iweon reclaimed land having higher soil conductivity and coarse sandy textured soil. Rape cultivated during dry winter-spring much more suffered serious growth and yield reduction by high soil salinity come from re-salting process. 50% yield reduction was estimated at $2.0\;2.5dS\;m^{-1}$ of surface soil EC by logarithmic function. Consequentially, it was concluded that oilseed production for energy by double cropping system of rape and castor bean might be possible under good controling soil salinity below $4dS\;m^{-1}$ for castor and $3dS\;m^{-1}$ for rape in the newly reclaimed land of Korea.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.183-191
• /
• 2008

This study evaluated influence of the loading head dimension on characteristics of deformation strength ($S_D$) of asphalt mixtures. Kim test and Wheel tracking (WT) test were conducted to evaluate $S_D$ characteristics with relation to WT results for various mixtures. The $S_D$ values and coefficient of variation of $S_D$ values of r=10mm were smaller than those of r=10.5mm. It was also found that $S_D$ values obtained using r=10mm loading head showed high correlations with rut parameters of WT test. It was indicated that the aggregate size and radius (r) of round cut were statistically significant variables on $S_D$ at = 0.05 level in the analysis of variance. However, in interaction of r and aggregate size showed no significance within $10{\sim}19mm$ aggregate size at the same level. Therefore, it was concluded that the diameter (D) of 40mm and the bottom edge radius (r) of 10mm was suitable dimension of loading head for deformation strength test.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.3
• /
• pp.691-707
• /
• 2020

In this paper, we introduce and study the notions of weakly ⊕-supplemented modules, weakly D2 modules and weakly D2-covers. A right R-module M is called weakly ⊕-supplemented if every non-small submodule of M has a supplement that is not essential in M, and module M_R is called weakly D2 if it satisfies the condition: for every s ∈ S and s ≠ 0, if there exists n ∈ ℕ such that sⁿ ≠ 0 and Im(sⁿ) is a direct summand of M, then Ker(sⁿ) is a direct summand of M. The class of weakly ⊕-supplemented-modules and weakly D2 modules contains ⊕-supplemented modules and D2 modules, respectively, and they are equivalent in case M is uniform, and projective, respectively.