• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권2호
• /
• pp.179-186
• /
• 2013

혈액순환촉진, 심혈관계치료, 피부질환, 암세포억제 등의 의료분야에 원적외선 치료법이 광범위하게 활용되고 있다. 본 연구에서는 원적외선 치료에 효과적인 패널형 방사체의 발열부에 대한 열적 특성을 실험적으로 분석하였다. 발열선은 정상상태에서 절연피복에 $150mW/m^2$의 열유속으로 열에너지를 공급하여 절연피복은 발열선 온도의 20%에 도달하였다. 단열막 사용은 약 20%의 발열판 표면온도 증가효과가 있었으며 열시상수를 상승시켜 혈액순환촉진에 크게 기여하는 것으로 나타났다. 발열선의 배치간격이 발열부 설계에 중요한 인자이며 열확산의 중첩을 위해 발열판의 열전도계수와 밀도를 고려해야함을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.737-739
• /
• 1992

The microstructure and humidity sensitive characteristics of $V_2O_5$ doped $CaTiO_3$ were studied. Sensing elements were prepared in bulk form. This element exhibits a porous structure. The grain grows and electrical conductivity increases as doping amount of $V_2O_5$ increases. The change of impedance and capacitance under different r.h is remarkable, and the conduction carriers of this element were ions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1367-1369
• /
• 1997

본 논문에서는 PET/PET 필름과 인터페이스를 갖는 PET/SEMI/PET필름에서의 전기 전도도와 공간전하분포를 고찰하였다. 반도전층을 가지고 있는 PET/SEMI/PET 필름의 전도전류는 PET/PET에 비하여 높았으며 특히 전압 인가후 순간적인 전류가 급격하게 소멸하였다. 또한 PET/SEMI/PET 필름의 공간전하 분포는 PET/PET 필름에 비해 높은 전하 형성을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1129-1131
• /
• 2001

A new low cost single stage high power factor electronic ballast for fluorescent lamps is presented in this paper. The proposed topology is based on integration of two-boost converter and LC type high frequency resonant converter. A ballast is obtained by simple construction, because full bridge rectifier diode is eliminated and simple control circuits is applied. Using two boost converter operating positive and negative half cycle respectively at line frequency (60Hz), operating in discontinuous conduction mode performs high power factor. The simulated and experimental results for 64W fluorescent lamps operating at 45kHz switching frequency and 110V line voltage have been obtained.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.660-665
• /
• 1996

Thin films of indium oxide and indium tin oxide have been prepared by d.c. magnetron sputtering onto the fused silica substrates kept at 90, 200 and $300^{\circ}C$. In order to elucidate the optical absorption process in low energy region below 3 eV, we have analyzed the absorption coefficients obtained from reflectance and transmittance measurements for these films based on the Lucovsky model. It has been found for the first time that a defect center in the band gap is located at 0.8~1.4 eV below the Fermi level in all films and arises from oxygen vacancies in their films. The optical absorption in low energy region is explained to be dominated by the transition of electrons trapped at the positively charged (+2e) oxygen vacancies with s-like nature to the conduction band formed from the 5s-orbit in indium atoms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.833-836
• /
• 1993

A flyback type power converter circuit for switched reluctance motor drives is presented. In this converter circuit, the energy extracted from an off going phase is stored in an additional capacitor. The energy stored is used to either be returned to the source frequently or energize the conducting phase during the conduction interval through the transformer. The additional switch to pass the energy stored in the capacitor to the source or the conducting phase is switched under a relatively low voltage condition. Its switching frequency is relatively high so that the size of the transformer can be reduced. The design guideline for the capacitor and the transformer is described. The effectiveness of the presented converter circuit is compared to other circuits through the analysis and experiment.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3211-3217
• /
• 2013

Density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations have been employed to investigate the molecular structures and absorption spectra of three D-${\pi}$-A-type organic dyes (C1-1, D5 and TH208) containing identical ${\pi}$-spacers and electron acceptors, but different aromatic amine electron-donating groups (tetrahydroquinoline, triphenylamine and phenothiazine). The coplanar geometries indicate that the strong conjugation is formed in the dyes. The electronic structures suggest that the intramolecular charge transfer from the donor to the acceptor occurs, and the electron-donating ability of tetrahydroquinoline is stronger than those of triphenylamine and phenothiazine. The computed orbital energy levels of these dyes confirm that the electrons could be injected from the excited dyes to the semiconductor conduction band and the oxidized dyes could be reduced effectively by electrolyte. The TD-DFT results show that the CAM-B3LYP/6-31+G(d, p) is suitable for calculating the absorption spectra. The first absorption band for these dyes is assigned to the HOMO${\rightarrow}$LUMO and HOMO-1${\rightarrow}$LUMO transitions.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.125-126
• /
• 1998

Pulse conduction velocity is determined by areterial compliance, which is changed by lateral pressure of arterial wall. Hydrostatic pressure of the limb vessel is changed by body position, especially in elevated arm. The arterial pulse in the finger causes the blood volume to change, changing the optical density of the blood. Photoplethysmograph of index finger was obtained by LED and phototransistor. Pulse transmission time(PTT) was measured by the interval between the peak of ECG R wave and the peak of the finger plethysmogram. PTT was increased by upward position of arm, and decreased by downward position of the arm compared to horizontal position. This result suggests that relationship between finger plethysmography and postural change could be applied to evaluate clinical cardiovascular status.

• 전기의세계
• /
• 제25권1호
• /
• pp.95-100
• /
• 1976

The main purpose of this paper is to study on the transient current due to the change of environmental temperature under no external field in the arrangement of M$_{1}$(metal)-P(polyver)-M$_{2}$(metal). The specimer of polymeric insulator sandwiched by two metal electrodes composes a parallel-plate condenser represented by Maxwell-model. The behaviors of short circuit current flowing in M-P-M arrangement are very complex and the analysis of its conduction mechanism appears to be much complicated. In this paper we can suggest that a contact potential difference as an energetic state exists in the thin film specimen both sides of which are contacted by two different metals having different cook functions. Futhermore the contact potential difference appears to be constant through the course of temperature change, however, the dielectric constant and caparitance of the specimen must be temperature dependent. Accordingly the charge difference induced on both sides of electrodes may be a cause for the shory circuited transient current flowing through the external circuit. It is also suggestive that the results of the observation must be considered in cases of insulation design of electrical machines and D.C. cable for high voltage use.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.959-965
• /
• 2024

The High Temperature Test Unit (HTTU) was an experimental set-up to conduct separate and integral effects tests of the Pebble Bed Modular Reactor (PBMR) core. The annular core consisted of a randomly packed bed of uniform spheres. Natural convection tests using both nitrogen and helium, and forced convection tests using nitrogen, were conducted. The maximum material temperature achieved during forced convection testing was 1200 ℃. This paper presents the numerical analysis of the flow and temperature distribution for a forced convection test using 3D CFD as well as a 1D systems-CFD computer code. Several modelling approaches are possible, ranging from a fully explicit to a semi-implicit method that relies on correlations of their associated phenomena. For the comparison between codes, the analysis was performed using a porous media approach, where the conduction and radiative heat transfer were lumped together as an effective thermal conductivity and the convective heat transfer was correlated between the solid and gas phases. The results from both codes were validated against the experimental measurements. Favourable results were obtained, in particular by the systems-CFD code with minimal computational and time requirements.