• The Korean Journal of Ecology
• /
• v.17 no.3
• /
• pp.367-378
• /
• 1994

The germination responses of Echinochloa crus-galli (L.) Beauv. seeds to temperature were examined under the various thermal conditions. While almost all the seeds tested did not germinate immediately after collection, almost of the seeds which were stored for 7, 10, and 17 months showed very high germination percentages (85-95%) at their own constant temperatures between $16^{\circ}C\;and\;40^{\circ}C$. The total thermal time which was required for germination(10-70%) of Echinochloa crus-galli seeds ranged from 539Kh(degree Kelvin X hour) to 1,279Kh in accordance with the distribution function of thermal time, $F({\Theta})=1-[3D^{-3}({\Theta}-m+D)+1]^{-1/2}$, where m is 935Kh and D is 555Kh. Moist chilling treatment at $2^{\circ}C$ for 20 days increased the final germination percentage as well as the germination rate. In the increasing temperature(IT1 regime, E. crus-galli seeds started to germinate at $12^{\circ}C$. and showed greater germination rate with increasing temperatures, with the final germination percentage of 80%. On the other hand, in the decreasing temperature(DT1 regime, the seeds began to germinate at $12^{\circ}C$(10% germination) with the final germination percentage of 20%. An induced dormancy occurred at $4^{\circ}C$ in the DT regime.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.4
• /
• pp.261-267
• /
• 1996

The characteristics and adhesion strength of TiN layer deposited by D. C. magnetron sputtering were investigated. Three types of TiN layers were deposited on STS304 stainless steel. Scratch tests were performed to determine the effect of deposition temperature, the thickness of coated TiN layer and the titanium inter-layer on the adhesion strength. TiN multilayer with titanium inter-layer showed the highest critical load in the deposition temperature range of $25^{\circ}C$ to $300^{\circ}C$. Adhesion strength of TiN multilayer with titanium inter-layer was raised from 15N to 20N by raising deposition temperature from $25^{\circ}C$ to $400^{\circ}C$. Adhesion strength was raised from 18N to 38N by increasing the thickness of outer layer of TiN multilayer from 2.1 $\mu\textrm{m}$ to 9.5 $\mu\textrm{m}$.

• 전기의세계
• /
• v.18 no.5
• /
• pp.12-19
• /
• 1969

The sensitivity of transistorized d.c. amplifiers is mainly limited by drift at operating point caused by ambient temperature changes. A chopper-type transistorized amplifier is necessary to obtain a high sensitivity without recourse to drift compensation which requires the adjustment of several balancing controls. A chopper-stabilized system consisting of an electro-mechanical chopper for input and output and a high-gain a.c. amplifier is designed and analyzed. The gain of the a.c. amplifier, expressed as the ratio of voltages, is larger than 80db in the band of 50C/S - 100KC/S. The complete system gives an open-loop gain of 68db at direct current. The offset voltage is 20.mu.V referred in input and the voltage drift at the input is less than 10.mu.V/hr at 25.deg.C. This type of amplifier would be useful for the high-gain transistorized d.c. amplifier for analog computers. Also, due to the high input impedance, it is suitable for amplification of signals from wide range of source impedances.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1247-1254
• /
• 2018

We study the uncertainty stemming from different theoretical models in the spectroscopic factors extracted from experiments. We use three theoretical approaches, the distorted wave Born approximation (DWBA), the adiabatic distorted wave approximation (ADWA) and the continuum discretized coupled-channels method (CDCC), and analyze the $^{12}C(d,p)^{13}C$, $^{14}C(d,p)^{15}C$ reactions. We find that the uncertainty associated with the adopted theoretical models is less than 20%. We also investigate the contribution from the remnant term and observe that it gives less than 10% uncertainty. We finally make an attempt to explain the discrepancy in the spectroscopic factors of $^{17}C(\frac{3}{2}^+)$ between the ones extracted from experiments and from shell model calculations by analyzing the $^{16}C(d,p)^{17}C$ reaction.

• Korean Journal of Food Science and Technology
• /
• v.52 no.6
• /
• pp.670-677
• /
• 2020

To prevent contamination by Campylobacter jejuni during chicken carcass processing, the effect of emulsifiers on C. jejuni inoculated on chicken skin was investigated using confocal laser scanning microscopy. Among the 8 emulsifiers (SWA-10D, L-7D, M-7D, S-1670, L-1695, P-1670, polysorbate 20, polysorbate 80) tested for antimicrobial activity by the paper disk method, 4 emulsifiers (L-7D, L-1695, polysorbate 20, polysorbate 80) were screened further. Emulsifier L-1695 showed the largest clear zone at a concentration of 200 mg/mL. The 4 emulsifiers subjected to primary screening were screened for heat and pH stability. In the contact surface test, emulsifier L-1695 showed the lowest log CFU/㎠ value on both stainless steel and ceramic surfaces. When emulsifier L-1695 was applied via general and electrostatic spray methods, the number of C. jejuni entrapped inside chicken skin follicles was significantly reduced in both methods. In conclusion, the emulsifier L-1695 could be employed as a microbial detachment agent in the chicken carcass processing industry.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.12
• /
• pp.1625-1632
• /
• 2009

Four lactating Holstein Friesian crossbred cows, with an average initial weight of 450 kg, 48${\pm}$12 days in milk and initial milk yield of 18 kg/h/d, were randomly arranged according to a 2${\times}$2 factorial arrangement in a 4${\times}$4 in Latin square design with 21-d period to investigate the effects of type of total mixed ration (TMR) and type of whole cottonseed (WCS) on intake, digestibility and milk production. The dietary treatments were i) TMR and WCS supplementation at 0.5 kg/h/d, ii) TMR and cracked WCS (cWCS) supplementation at 0.5 kg/h/d, iii) fermented TMR (FTMR) and WCS supplementation at 0.5 kg/h/d, and iv) FTMR and cWCS supplementation at 0.5 kg/h/d. Voluntary feed intake was 15.9, 15.2, 15.4 and 15.6 kg DM/d in dietary treatment 1, 2, 3 and 4, respectively. Digestibility of DM, OM, CP, EE, NDF and ADF were not significantly different among dietary treatments. Ruminal pH, $NH_{3}-N$ and volatile fatty acids in the rumen were also not significantly different among type of TMR or type of WCS. Blood urea-N concentration was not significantly different among dietary treatments. Ruminal bacteria population tended to increase but ruminal protozoa population tended to decrease with supplementation of cWCS, but they were not affected by FTMR. Milk yield and 3.5% FCM were not statistically different among treatments (16.6, 16.2, 17.0, 16.3 kg/d and 18.0, 18.6, 19.9 and 19.0 kg/d, respectively). Milk composition was not significantly different among dietary treatments. However, unsaturated fatty acids in milk fat in cows fed FTMR were lower (p<0.05) than in cows fed TMR. In conclusion, fermentation is a conceivable method to improve the quality of TMR for long-time storage and the cracking method is suitable to release the fat from cottonseed for enhancing fatty acid deposition in milk. Thus, the combination of FTMR and cWCS supplementation would be an alternative strategy to improve performance of lactating cows.

• Korean Journal of Microbiology
• /
• v.40 no.2
• /
• pp.121-126
• /
• 2004

Comamonas sp. strain DJ-12 is a 4-chlobiphenyl(4CB)-degrading bacterium that was reidentified from Pseudomonas sp. DJ-12. The genomic DNA was isolated from the strain DJ-12 and amplified by PCR with primers for cloning pcbABCD genes responsible for degradation of 4CB. The amino acid sequences deduced from the nucleotide sequences of pcbA1, pcbA2, pcbA3, pcbA4, pcbB, pcbC2, and pcbD2 genes showed 91, 87, 99, 87, 97, 90 and 87％ homologies with those of Pseudomonas sp. KKS102, respectively. The pcbC1D1 genes that are involved in the degradation of (4-chloro)1,2-dihydroxybiphenyl produced from 4CB by pcbAB gene products were previously reported in the recombinant plasmid pCU1 from Pseudomonas sp. DJ-12. However, the pcbC2D2 genes in the plasmid pCT4 and pCT5 cloned from Comamonas sp. DJ-12 in this study showed 51 and 62％ homologies with those of pcbC1D1 in their nucleotide sequences. The pcbC1D1 and pcbC2D2 genes were found by Southern hybridization to be located at different loci on the chromosome of DJ-12 strain. These results indicate that Comamonas sp. strain DJ-12 has two different sets of pcbCD genes responsible for deg-radation of (4-chloro)1,2-dihydroxybiphenyl.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.842-851
• /
• 1998

Development and growth of Acartia steueri from Ilkwang Bay, southeastern coast of Korea, were determined under various temperatures and food condition (Isochrysis galbana and Dunaliella salina) in the laboratory. Relationship between egg hatching time ($D_E$, day) and temperature (T, $^{\circ}C$) was $D_E=744(T+3.5)^{-1.97}$. Mean hatching success was $88.4\%$ in temperature range of $8.4\~26.2^{\circ}C$. This suggests that A. steueri may be adapted to the temperature ranges in temperate regions. Post-embryonic development pattern was equiproportional rather than isochronal, with longer stage duration of copepodites than that of the nauplii. Stage duration of NI was the shortest of all developmental stages, while the duration of NII was the longest in duration of the other nauplii. Male was morphologically distinguished from female in CIV stage, and male was developed faster than female. Median development time at a given temperature was calculated from the Belehradek equation by proper multiplication of proportional constant for embryonic development. Body carbon weight at $19.1^{\circ}C$ was increased exponentially with time. Mean specific growth rate of nauplii (0.200 $d^{-1}$), except for NI stage, was not significantly different from that of copepodites (0.190 $d^{-1}$), with the lowest rate in NVI stage (0.107 $d^{-1}$), probably due to energy consumption for metamorphosis rather than somatic growth. The results suggest that although the development pattern determined in this study was not identical with Uye's result for A. steueri (e.g. Uye, 1980b), median development time may be applicable to calculate the stage duration of A. steueri in this study area.

• Nuclear Engineering and Technology
• /
• v.44 no.5
• /
• pp.523-534
• /
• 2012

The objective of this study was to experimentally investigate the effect of heat curing methods on the temperature history and strength development of slab concrete exposed to $-10^{\circ}C$. The goal was to determine proper heat curing methods for the protection of nuclear power plant structures against early-age frost damage under adverse (cold) conditions. Two types of methods were studied: heat insulation alone and in combination with a heating cable. For heat curing with heat insulation alone, either sawdust or a double layer bubble sheet (2-BS) was applied. For curing with a combination of heat insulation and a heating cable, an embedded heating cable was used with either a sawdust cover, a 2-BS cover, or a quadruple layer bubble sheet (4-BS) cover. Seven different slab specimens with dimensions of $1200{\times}600{\times}200$ mm and a design strength of 27 MPa were fabricated and cured at $-10^{\circ}C$ for 7 d. The application of sawdust and 2-BS allowed the concrete temperature to fall below $0^{\circ}C$ within 40 h after exposure to $-10^{\circ}C$, and then, the temperature dropped to $-10^{\circ}C$ and remained there for 7 d owing to insufficient thermal resistance. However, the combination of a heating cable plus sawdust or 2-BS maintained the concrete temperature around $5^{\circ}C$ for 7 d. Moreover, the combination of the heating cable and 4-BS maintained the concrete temperature around $10^{\circ}C$ for 7 d. This was due to the continuous heat supply from the heating cable and the prevention of heat loss by the 4-BS. For maturity development, which is an index of early-age frost damage, the application of heat insulation materials alone did not allow the concrete to meet the minimum maturity required to protect against early-age frost damage after 7 d, owing to poor thermal resistance. However, the combination of the heating cable and the heat insulating materials allowed the concrete to attain the minimum maturity level after just 3 d. In the case of strength development, the heat insulation materials alone were insufficient to achieve the minimum 7-d strength required to prevent early-age frost damage. However, the combination of a heating cable and heat insulating materials met both the minimum 7-d strength and the 28-d design strength owing to the heat supply and thermal resistance. Therefore, it is believed that by combining a heating cable and 4-BS, concrete exposed to $-10^{\circ}C$ can be effectively protected from early-age frost damage and can attain the required 28-d compressive strength.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.3
• /
• pp.269-276
• /
• 2009

This experiment was carried out to investigate the effects of increases of nutrient level of TMR on dry matter intake, digestibility, nitrogen and energy balance in growing dairy goats (Saanen). Twelve growing dairy goats weighing 17.5kg were randomly assigned to one of four TMRs; low energy-low crude protein (CP) TMR (control; A), high energy-low CP TMR (B), low energy-high CP TMR (C) and high energy-high CP TMR (D). The content of total digestible nutrients (TDN) and CP in the control diet were 67% and 11%. The TDN content of the high energy TMR was 73.7% and the CP content of the high CP TMR was 13%. Dry matter intake was highest in D, and significantly higher in B than in C (p<0.05). Digestibility for dry matter and cell contents increased in proportion to dry matter intake. NDF digestibility was higher in D than in A, while ADF digestibility was higher in A and C than in B, but was not significant. Digestible nitrogen, apparently digested nitrogen and retained nitrogen were correlated with intake, and significantly higher in B than in C (p<0.05). Digestible energy and metabolizable energy were highest in D, and significantly higher in B than in C (p<0.05). Therefore, the present results showed that D or B were better than C for high intake, digestibility, nitrogen and energy utilization.