• 한국광학회지
• /
• 제33권6호
• /
• pp.260-266
• /
• 2022

2개의 결합층과 2개의 격자 층으로 구성된 회절격자 구조를 형성하고, 최적화 기법을 통하여 -1차에서 높은 투과 회절 효율을 가지는 회절격자를 설계하였다. 설계된 회절격자는 설계 중심파장에서 99.997%의 transverse electric wave 회절 효율을 가지고 있었으며, 95% 이상의 회절 효율을 유지하는 파장 폭이 80 nm이고 입사각 폭이 20.0°이었다. 회절격자 공차 분석을 수행하여 95% 이상의 회절 효율을 가지기 위한 두께 공차가 최소 60 nm 이상 확보되어 있고, 내부각도 10° 이내의 사다리꼴 모양에서도 회절 효율을 유지할 수 있음을 확인하였다.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.551-568
• /
• 2018

Purpose: This study addressed the relationship between technological innovation activity and management efficiency of Korean automobile firms. We tested the hypothesis of non-liner relationship of innovation activity in relation to management efficiency. Methods: We discussed prior literature in the firm innovation strategy and management efficiency studies to provide better understanding of relationships between technological innovation activity and management efficiency. As a result, we developed develop and tested a model (Inverted-U shaped) capturing the non-linear impact of technological innovation activity. While we used R&D expenditure and patent registration data for measuring firms' innovation activity, management efficiency was evaluated by using DEA(Data Envelopment Analysis). Results: Main findings of our empirical analysis indicated that the relationships between technological innovation activity and management efficiency was inverted U shaped. This implied that the relationship between technological innovation and management efficiency is inverted U-shaped non-linear, with management efficiency increasing up to a point, beyond which higher levels of R&D and patent registration activities led to a decrease in management efficiency. Conclusion: This study empirically assessed the inconclusive findings of previous research in the area of effects of innovation activities in relation to firm performance. The paper also provided theoretical and practical implications for firms who explore efficient strategy to promote the management performance through technological innovation activities. Future research directions with the limitation of the study was discussed.

• 상하수도학회지
• /
• 제31권1호
• /
• pp.13-19
• /
• 2017

Relatively low efficiency in anaerobic digestion process is mainly caused by unproper mixing method. In this study, tray motion type agitator was applied in actual anaerobic digestion tank in order to improve the digestion efficiency, equalize the flow velocity distribution and energy saving. The impeller of tray motion type agitator was reciprocated vertically. Gas lift type agitator and tray motion type agitator appears almost same mixing efficiency include digestion rates. However, tray motion type agitator have shown that lower energy consumption compared to the conventional gas lift type agitator. Implementation of tray motion type agitator in the anaerobic digestion tanks contributed to the stabilization of mixing environment, efficiency and energy efficiency of the tank.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1125-1131
• /
• 2013

Wireless power transmission technology has been studied variety. Recently, wireless power transmission technology used by resonance and magnetic induction field is applied to various fields. However, magnetic resonance and inductive coupling are have drawbacks - power transmission distance is short. Microwave transmission and accept techniques have been developed to overcome short distance. However, improvement in efficiency is required. This paper, propose a high-efficiency microwave energy acceptor IC(EAIC). Suggested EAIC is consists of RF-DC converter and DC-DC converter. Wide Input power range is -15 dBm ~ 20 dBm. And output voltage is boosted up to 5.5 V by voltage boost-up circuit. EAIC can keep the output voltage constant. Available efficiency of RF-DC converter is 95.5 % at 4 dBm input. And DC-DC efficiency is 94.79 % at 1.1 mA load current. Fully EAIC efficiency is 90.5 %.

• 한국환경보건학회지
• /
• 제26권4호
• /
• pp.9-14
• /
• 2000

In this study, the removal efficiencies of organics, nitrogens and phosphorus from municipal wastewater using $A^2$/O process were investigated. BO $D_{5}$ removal efficiencies were indicated 95% and 94% with HRT of 12 hr and 10 hr, respectively. CO $D_{Cr}$ average removal efficiency and concentration of effluent were indicated 87% and 34mg/$\ell$. SS average removal efficiency and concentration of effluent were indicated 93% and 4~17mg/$\ell$. T-N removal efficiency and concentration of effluent were shown as 60~80% and below 15mg/$\ell$. In aerobic basin, removal efficiency of N $H_4$-N was shown over 97% with N $H_4$-N volume load 0.16kg N $H_4$-N/㎥.d and in anoxic basin, denitrification efficiency was indicated over 80% with return sludge rate 0.5Q and internal recirculation rate 2.5Q. Removal efficiency and effluent concentration of phosphorus were shown over 80% and below 2 mg/$\ell$ with return sludge rate 0.5Q.Q.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.256-256
• /
• 2009

This paper presents a proper condition to achieve above 17 % conversion efficiency using PC1D simulator. Crystalline silicon wafer with thickness of $240{\mu}m$ was used as a starting material. Various efficiency influencing parameters such as rear surface recombination velocity and minority carrier diffusion length in the base region, front surface recombination velocity, junction depth and doping concentration in the Emitter layer. Among the investigated variables, we learn that 2nd doping concentration as a key factor to achieve conversion efficiency higher than 17 %.

• 전자공학회논문지D
• /
• 제35D권4호
• /
• pp.47-52
• /
• 1998

As to power combining system, it is very important to achieve a high combining efficiency in order to minimize theamount of prime power needed and hence the cooling requirements, all of which translate into reduced cost. The combining efficiency is degraded in practice by variation in the amplitude and phase of the signals to be combined. In this paper, the new power combining newtork is proposed and realized which has the automatic gain and phase control system. This control system makes amplituede and phase variation of its all path equal. When the amplitude and phase variations are within 0~5dB and .+-.50.deg., the results show that high combining efficiency is maintained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.15-18
• /
• 2001

Perdeuterated hexaflouroacetylacetonato-ytterbium [Yb(SOL)-D)$_3$] complexes were synthesized by the keto-enol tautomerism reaction of Yb(SOL-H)$_3$ in methanol-d$_4$in methanol-d$_4$in order to reduce the radiationless transition to the ligands. The luminescence properties of Yb(SOL-D)$_3$complex were measured in the following anhydrous deuterated organic solvents ; Methanol-d$_4$, THF-d$\sub$8/, PO(OCH$_3$)$_3$ and DMSO-d$\sub$6/. The intensity, lifetime and quantum efficiency of the luminescence in DMSO-d$\sub$6/ were superior to those in other deuterated solvents. It was suggested that the anhydrous DMSO-d$\sub$6/ might be the most appropriate solvent for the liquid laser material of Yb(SOL-D)$_3$ complex.

• 국제지역연구
• /
• 제20권2호
• /
• pp.63-83
• /
• 2016

본 연구는 수출제조기업의 효율성을 분석하고, 이러한 효율성에 영향을 미치는 요인을 분석하는데 연구목적이 있다. DEA를 활용한 수출제조기업의 효율성 분석에는 투입변수로 종업원수와 자본을 활용하고 산출변수로 매출액을 활용하였다. 수출제조기업의 효율성에 영향을 미치는 요인은 기존 실증연구를 기초로 연구개발집약도, 수출집약도, 인건비비율, 일반관리비비율, 총자산, 유동성 및 자기자본비율을 선정하였다. 실증분석에는 369개 코스닥 수출제조기업의 2013년부터 2015년까지 3년간 패널자료를 활용하였다. 패널 Tobit 회귀분석을 활용한 실증분석결과 중에서 코스닥 수출제조기업 전체를 대상으로 한 분석결과에서는 연구개발집약도, 인건비비율, 총자산 및 자기자본비율이 CCR효율성과 BCC효율성에 부의 영향을 미치고, 수출집약도가 CCR효율성에 부의 영향을 미치는 것으로 나타났다. 코스닥 수출제조기업 중 대기업을 대상으로 한 분석결과에서는 연구개발집약도가 CCR효율성과 BCC효율성에 정의 영향을 미치고, 수출집약도, 인건비비율 및 자기자본비율이 CCR효율성과 BCC효율성에 부의 영향을 미치고, 일반관리비비율이 BCC효율성에 부의 영향을 미치는 것으로 나타났다. 코스닥 수출제조기업 중 중소기업을 대상으로 한 분석결과에서는 연구개발집약도, 인건비비율, 총자산 및 자기자본비율이 CCR효율성과 BCC효율성에 부의 영향을 미치는 것으로 나타났다.

• 한국환경보건학회지
• /
• 제11권2호
• /
• pp.17-27
• /
• 1985

The objectives of this study is to examine efficiency of swinery wastewater treatment by trickling filters' pilot plant. The results of this study are as follows: 1. The characteristics of sample. The BOD$_5$ was from 2,450 to 2,880mg/l, COD(KMnO$_4$ acid method) was from 910 to 1,064mg/l, and SS was from 920 to 990mg/l. The pH of influent was from 7.3 to 7.6, and the temperature of water was from 17.0$\circ$C to 22.5$\circ$C. 2. For experiment by recirculation, the BODs removal efficiency is 65.2% at recirculation ratio (r)=0, and 70.7% at r=1. The ramoval efficiency of this study is higher than NRC formula of U.S.A.. The recirculation is not significant effect on removal efficiency. 3. For experiment by hydraulic load, the BOD$_5$ removal rate decreased from 73.1% at $3.1m^3/m^2\cdot d$ to 65.3% at $9.2m^3/m^2\cdot d$. The design formula of this study which shows the removal rate of soluble BOD is $Le/Li =10^{-0.24} D/Q^{0.24}$ (Q: hydraulic load, D: depth of filter). 4. For experiment by organic load, the BOD$_5$ removal rate is increased from 70.2% at $0.77kg/m^3\cdot d$ to 75.4% at $4.28kg/m^3\cdot d$. We can obtain the straight line y=0.749 x (y: removed BOD, x :applied BOD) by the least squares method. 5. We can know that trickling filters is strong with the hydraulic load and the organic matter shock load. Here, we can judge that trickling filters is a good method for the treatment of swinery wastewater which containing high concentrated organic matter.