• Title/Summary/Keyword: D-TRS

Search Result 33, Processing Time 0.021 seconds

Retrograde Tracer Studies of Tecto-Reticulospinal Pathway and Dorsal Lateral Geniculate Nucleus on GluR1- and GluR4-Immunoreactive Neurons in the Hamster Superior Colliculus (Tecto-reticulospinal pathway (TRS)와 dorsal lateral geniculate nucleus (dLGN)에서 역행성이동추적물질 이용 햄스터 상구에서 GluR1-, GluR4- 면역반응 신경세포 연구)

  • Choi, Jae-Sik;Lee, Jea-Young;Jang, Yu-Jin;Lee, Eun-Shil;Jeon, Chang-Jin
    • Journal of Life Science
    • /
    • v.20 no.1
    • /
    • pp.1-8
    • /
    • 2010
  • We recently reported the distributions of AMPA ($\alpha$-amino-3-hydroxyl-5-methyl-4-isoxazole-propionate) receptor subtypes glutamate receptors (GluR) 1 and GluR4 in the superior colliculi (SC) of hamsters with antibody immunocytochemistry and the effect of enucleation on these distributions. We also compared these labelings to those of calcium-binding proteins calbindin D28K, calretinin, parvalbumin, and GABA. In the present study, we investigated whether the GluR1- and GluR4-immunoreactive (IR) neurons are interneurons or projection neurons by injection of the retrograde tracer horseradish peroxidase (HRP) into one of each major ascending and descending pathways of the SC. HRP injections were made into a tecto-reticulospinal pathway (TRS) and dorsal lateral geniculate nucleus (dLGN). Animals were then allowed to recover and to survive for 48 hr before perfusion. Sections containing retrograde-labeled neurons were then treated for GluR-immunoreactivity. HRP injections proved that only a small population of the GluR1-IR cells project into TRS (1.4%) and dLGN (2.6%). However, a large subpopulation of GluR4-IR cells project into TRS (32.7%). The differential compositions of inter/projection neurons, along with our previous studies on the separate distribution of the GluR subunits, its differential co-localization with calcium-binding proteins and GABA, and differential reactions to enucleations, strongly imply the functional variety of the receptor subunits in visual behavior responses.

Comparison of Air Kerma­based and Absorbed Dose to Water­based Protocols in the Dosimetry of High Energy Electron Beams (고 에너지 전자선에 대한 공기커마와 물 흡수선량에 기반한 프로토콜간의 비교)

  • 박창현;신동오;박성용
    • Progress in Medical Physics
    • /
    • v.14 no.4
    • /
    • pp.249-258
    • /
    • 2003
  • A few years ago, a proposal was made to change the dosimetry from the air kerma-based reference dosimetry to the absorbed dose-based reference dosimetry for all radiotherapy beams of ionizing radiation to improve the accuracy of dosimetry. Here, we present a dosimetry study in which the two most widespread absorbed dose­based protocols (IAEA TRS­398 and AAPM TG­51) were compared with an air kerma­based protocol (IAEA TRS-277) by measuring the absorbed dose in the same reference depth. Measurements were performed in three clinical electron beam energies using a PTW 30002 cylindrical chamber, and Markus and Roos plane­parallel chambers. $^{60}$ Co calibration factors were obtained from the KFDA. The absorbed dose differences between the air kerma­based and absorbed dose­based protocols were within 2.0% for all chambers in all beams. The results thus show that the obtained absolute dose values will be not significantly altered by changing from the air kerma­based dosimetry to the absorbed dose­based dosimetry. It was also shown that absorbed dose values between the absorbed dose­based protocols agreed by deviations of less than 0.5% for a cylindrical chamber and less than 0.7% for plane­parallel chambers using cross­calibration factors. Although the use of a cylindrical chamber and plane­parallel chambers resulted in a difference of less than 2% for all situations investigated here, to reduce errors, the plane­parallel chambers are recommended for electron energies in which the use of cylindrical chamber is not permitted in each protocol.

  • PDF

The Design of repeater U-shaped Antenna for ship base station Applications (선박기지국 응용을 위한 중계기용 U형 급전 안테나 설계)

  • Park, Chang-Hyun;Kim, Young-Nam;Kim, Kab-Ki
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2007.11a
    • /
    • pp.211-214
    • /
    • 2007
  • In this paper, we have designed microstrip antenna if 800[MHz] band It will be able to integrate TRS(Trunked Radio System), GSM(Global System for Mobile telecommunication) band including the CDMA(Code Division Multiple Access) band we designed repeater and a base station antenna which is possible at the ship and marine of safety. It is improves a narrow bandwidth problem of microstrip antenna. It had U-shaped feeding structure at a rectangular patch And ground or feeding structure used between dielectric constant(${\varepsilon}_T$ = 2.1), patch or feeding structure used between dielectric constant(${\varepsilon}_T$ =1). So it used a duplex resonance effect Designed frequency bandwith(V5WR 2:1) if the antenna showed good characteristic of $780[MHz]{\sim}1.83[GHz]$ to 2.61[GHz]. Also the E-plan and H-plan all profit 9.4[dBi] above, the 3[dB] beam width showed the characteristic over the E-plan and H-plan $60^{\circ}$ to be improved.

  • PDF

The Design of 800MHz Band Repeater Antenna for Ship Base Station Application (선박기지국 응용을 위한 800MHz 대역 중계기용 안테나 설계)

  • Kim, Kab-Ki
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.13 no.3
    • /
    • pp.219-222
    • /
    • 2007
  • In this paper, we have designed microstrip antenna of 800[MHz] band. It will be able to integrate TRS(Trunked Radio System), GSM(Global System for Mobile telecommunication) band including the CDMA(Code Division Multiple Access) band. we designed repeater and a base station antenna which is possible at the ship and marine of safety. It is improves a narrow bandwidth problem of microstrip antenna. It had L-shaped feeding structure at a rectangular patch and added the parallel L-slot that used a duplex resonance effect. Also for the improvement of profit the stack with the perpendicular. Designed frequency bandwith(VSWR 2:1) of the antenna showed good characteristic of 789${\sim}$1046[MHz] to 292[MHz](36%). Also the E-plan and H-plan all profit 6.4[dBi] above, the 3[dB] beam width showed the characteristic over the E-plan $44.7^{\circ} and H-plan $61.8^{\circ} to be improved.

  • PDF

Effects of Supplementation of Mulberry (Morus alba) Foliage and Urea-rice Bran as Fermentable Energy and Protein Sources in Sheep Fed Urea-treated Rice Straw Based Diet

  • Yulistiani, Dwi;Jelan, Z.A.;Liang, J.B.;Yaakub, H.;Abdullah, N.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.28 no.4
    • /
    • pp.494-501
    • /
    • 2015
  • A digestibility study was conducted to evaluate the effects of supplementing mulberry foliage and urea rice-bran as a source of fermentable energy and protein to 12 sheep fed diets based on urea-treated rice straw (TRS). The three dietary treatments were: T1, TRS with mulberry; T2, TRS with 50% mulberry replaced with rice bran and urea; and T3, TRS with rice bran and urea. The study was arranged in a completely randomized design with four replications for each treatment. The sheep were fed one of the three diets and the supplements were offered at 1.2% of the body weight (BW) and the TRS was provided ad libitum. There were no differences (p>0.05) among the three treatment groups with respect to dry matter (DM) intake ($76.8{\pm}4.2g/kg\;BW^{0.75}$) and DM, organic matter (OM), and crude protein (CP) digestibility ($55.3{\pm}1.22$; $69.9{\pm}0.85$; $46.3{\pm}1.65%$ respectively for DM, OM, and CP). The digestibility of fiber (neutral detergent fiber [NDF] and acid detergent fiber) was significantly lower (p<0.05) for T3 (46.2 and 46.6 respectively) compared to T1 (55.8 and 53.7 respectively) and T2 (54.1 and 52.8 respectively). Nitrogen (N) intake by sheep on diet T3 was significantly (p<0.05) higher than sheep fed diet T1. However, N balance did not differ among the three diets ($3.0{\pm}0.32g/d$). In contrast, the rumen ammonia ($NH_3-N$) concentrations in sheep fed T2 and T3 were significantly (p<0.05) higher than in sheep fed T1. The $NH_3-N$ concentrations for all three diets were above the critical value required for optimum rumen microbial growth and synthesis. Total volatile fatty acid concentrations were highest (p<0.05) in T1 (120.3 mM), whilst the molar proportion of propionic acid was highest in T3 (36.9%). However, the microbial N supply in sheep fed T1 and T3 was similar but was significantly (p<0.05) higher than for sheep fed T2. It was concluded that mulberry foliage is a potential supplement of fermentable energy and protein for sheep fed TRS based diet. The suggested level of supplementation is 1.2% of BW or 32% of the total diet since it resulted in similar effects on the intake of DM, OM, and NDF, digestibility of DM, OM, and CP, N utilization and microbial supply when compared to rice bran and urea supplementation.

Designs on Tri-band Antenna for Wireless Communication in a Ship (선박내 무선통신을 위한 삼중대역 안테나 설계)

  • Jo, Sung-Sik;Ju, Yang-Ro;Lim, Tae-Kyun;Jang, Eun-Sil;Kim, Hun;Han, Hang-Man
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2010.04a
    • /
    • pp.151-153
    • /
    • 2010
  • In this paper, the tri-band planar monopole microstrip antenna which stimulaneously meets the three bands such as TRS, WLAN and DMB is designed. The designed antenna size was smaller using CPW-fed structure that shows a ground-plane and a patch-plane are existed at one layer. The proposed antenna is designed on FR-4 substrate with a relative dielectric constant 4.3, thickness of 1.5mm and tangent loss 0.04. The designed antenna shows that VSWR is below 2 and has good return loss below -10dB over the three bandwidths.

  • PDF

Design of the Wide-Band Printed-Monopole Antenna Using Parasitic Elements (기생 소자를 이용한 광대역 프린트 모노폴 안테나의 설계)

  • Seo, Seung-Up;Lee, Yun-Bok;Yang, Myo-Geun;Seong, Won-Mo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.7
    • /
    • pp.719-725
    • /
    • 2008
  • In this paper, we have proposed a printed monopole antenna using parasitic elements. The broadband characteristics of the antenna is obtained by using the printed monopole and parasitic elements. To confirm the broadband characteristics of the antenna, of have designed and fabricated the proposed antenna. The return loss and radiation patterns are measured in the frequency range of$0.8{\sim}1.2\;GHz$. The measured results show that the proposed antenna has return loss less than -10 dB in the operating frequency band and the radiation pattern is the dipole-like patterns. The antenna gain varies from 1.7 to 4.6 dBi in the operating frequency band. Thus, the proposed antenna can be used for the broadband repeater antenna $0.806{\sim}0.960\;GHz$(TRS-800, CDMA and GSM-900).

The Traffic Performance Test Effects of Short Data Service Message Length in D-TRS (D-TRS환경에서 Short Data Service 메시지 크기에 따른 트레픽 성능평가)

  • Kim, Sai-Byuck;Song, Byeong-Kwon;Hwang, Gyu-Bin;Jeong, Tae-Eui;Kim, Jin-chul;Kim, Young-eok
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2009.04a
    • /
    • pp.1106-1108
    • /
    • 2009
  • TETRA(Terrestrial Trunked Radio)는 ETSI(European Telecommunications Standards Institute)에서 지정한 유럽 이동 무선 통신 기반의 표준이다. 본 논문은 TETRA 네트워크에서 트래픽에 따른 모뎀 성능 테스트와 그 결과 분석을 다룬다. TETRA 네트워크에서는 전송 방식에 따라 SDS(Short Data Service)와 PDS(Packet Data Service)로 나뉘게 되는데 본 논문에서는 PEI(Peripheral Equipment Interface)를 이용하여 SDS 전송 방식의 성능측정및 평가를 하였다. 본 측정에서는 최대 140바이트가 전송 가능한 SDS-Type 4가 사용 되었다. 성능 측정은 SDS메시지 데이터의 길이의 차이와 전송간격에 차이를 두어 측정하였다. 전송길이는 10에서 140바이트로 매 10바이트 단위씩 증가하였다. 전송 간격은 각각 0.5초, 1.0초, 1.5초씩 차이를 두어 측정하였고, 전송횟수는 각각 1000번씩 전송하였다. 테스트에 사용된 TETRA 모뎀은 UNIMO 사의 MU-1000MD이 사용되었다.

Evaluation of Shielding Performance of Tungsten Containing 3D Printing Materials for High-energy Electron Radiation Therapy (고에너지 전자선 치료 시 텅스텐 함유 3D 프린팅 물질의 차폐 성능 평가)

  • Yong-In Cho;Jung-Hoon Kim;Sang-Il Bae
    • Journal of the Korean Society of Radiology
    • /
    • v.17 no.5
    • /
    • pp.641-649
    • /
    • 2023
  • This study compares and analyzes the performance of a shield manufactured using 3D printing technology to find out its applicability as a shield in high-energy electron beam therapy. Actual measurement and monte carlo simulations were performed to evaluate the shielding performance of 3D printing materials for high-energy electron beams. First, in order to secure reliability for the simulation, a source term evaluation was conducted by referring to the IAEA's TRS-398 recommendation. Second, to analyze the shielding performance of PLA+W (93%), a specimen was manufactured using a 3D printer, and the shielding rate by thickness according to electron beam energy was evaluated. Third, the shielding thickness required for electron beam treatment was calculated through a comparative analysis of shielding performance between PLA+W (93%) and existing shielding bodies. First, as a result of the evaluation of the source term through actual measurement and simulation, the TRS-398 recommendation was satisfied with an error of less than 1%, thereby securing the reliability of the simulation. Second, as a result of the shielding performance analysis for PLA+W (93%), 6 MeV electron beams showed a shielding rate of more than 95% at 3.12 mm, and 15 MeV electron beams showed a shielding rate of more than 90% at 10 mm thickness. Third, through simulations, comparative analysis between PLA+W (93%) materials and existing shields showed high shielding rates within the same thickness in the order of tungsten, lead, copper, PLA+W (93%), and aluminum. 6 MeV electron beams showed almost similar shielding rates at 5 mm or more and 15 MeV electron beams. Through this study in the future, it is judged that it can be used as basic data for the production and application of shielding bodies using PLA+W (93%) materials in high-energy electron beam treatment.

The Design of Stack Structure Antenna Using the U-Slot patch for 800MHz Multiple Band Applications (U-Slot 패치를 이용한 800MHz 다중대역용 적층구조)

  • Park, Jung-Ah;Yoon, Chi-Moo;Kim, Kab-Ki
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2008.05a
    • /
    • pp.121-124
    • /
    • 2008
  • In this paper, we will design a 800MHz broadband antenna after a problem of the narrow bandwidth is improved. This multiple band antenna unifies the CDMA(Code Division Multiple Access), GSM(Global System for Mobile telecommunication) and TRS(Trunked Radio System) band in the UHF bandwidth, and then it is possible at the shore base station or repeater as the commercial use. It used the duplex resonance effect It had the L-shaped feeding structure which adds the V-slot. And it improved profit using stack structure. It was measured that the frequency bandwidth of the designed antenna which is planed $792{\sim}1040MHz$ with 248MHz(33%). And the antenna gain is 9.4dBi, 3dB beam width $60^{\circ}$ in radiation pattern.

  • PDF