• Journal of Animal Science and Technology
• /
• v.54 no.4
• /
• pp.275-282
• /
• 2012

The data including milk yields, fat and protein percent for 628,395 heads collected by National Agricultural Cooperative Federation, 15 type traits and final score for 62,262 heads collected by Korea Animal Improvement Association, which were born in 1998 to 2004, and net profits calculated from milk price and raising expenses of individuals were used to estimate genetic parameters. The highest positive genetic correlation, 0.81, was shown between body depth (BD) and loin strength (SR). Genetic correlations between body depth (BD) and udder depth (UD), front teat placement (TP) and front teat length (TL) were -0.23, which were lowest among the linear type traits. Furthermore, medium level of negative genetic correlations were shown the milk yield with milk contents rate traits. Mostly low level of positive genetic correlations were shown between the milk traits and linear score traits except milk yield and stature. Most of the genetic correlations of between the linear score traits and net profit were low level of positive or negative genetic correlations. Among the genetic correlations, body depth (BD), angularity (DF) and rear attachment width (UW), and final score (FS) with net profit were high as 0.17, 0.17, 0.18 and 0.18, respectively. Finally all of the genetic correlations between net profit and milk traits were positive and higher than the linear traits with positive genetic correlations. The results of this study suggest that net profit has been related with the linear traits, such as body depth (BD), angularity (DF) and rear attachment width (UW) traits, and furthermore, milk traits including yield and contents rates influence positively and greatly on net profit.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.1
• /
• pp.35-43
• /
• 2015

In this study, hot water extract from sea buckthorn (Hippophae rhamnoides L.) leaves fermented with Hericium erinaceum mycelium (SBT-HE) was assessed for protection against oxidative modification of biological macromolecules and cell death. Antioxidant activity of SBT-HE was evaluated based on 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical, and peroxyl radical scavenging assays. SBT-HE showed 65.06% DPPH radical scavenging activity at $500{\mu}g/mL$, 98.83% ABTS radical scavenging activity at $50{\mu}g/mL$, and 44.03% peroxyl radical scavenging activity at $100{\mu}g/mL$. SBT-HE significantly inhibited DNA strand breakage induced by peroxyl radical. SBT-HE also prevented peroxyl radical-mediated human serum albumin modification. SBT-HE effectively inhibited $H_2O_2$-induced cell death and significantly increased cell survival by 21.59% at $100{\mu}g/mL$. SBT-HE also reduced intracellular reactive oxygen species levels in $H_2O_2$-treated cells. The results suggest that SBT-HE can contribute to antioxidant activity and protect cells from oxidative stress-induced cell injury.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.1
• /
• pp.121-137
• /
• 2022

The purpose of this study is to present the necessary success factors and strategies for high-tech social ventures and stakeholders in the related ecosystem by empirically identifying factors that affect their sustainable performance. Based on prior research, the dimensions of three performance factors were presented: core technology competency, core business competency, and social mission orientation. Then, such sub-dimensions such as technology innovation orientation, R&D capability, business model, customer orientation, social network, and social mission pursuit were derived. For empirical analysis, a survey was conducted on domestic high-tech social ventures, and the significance of the hypothesis was tested through PLS-structural equation analysis of the collected 243 valid data. As a result, it was found that the technology innovation orientation was embedded as an abstract organizational and cultural characteristic in the high-tech social venture, which is a research sample, and thus did not significantly affect the dependent variable. In other words, aiming for the latest cutting-edge technology alone cannot affect performance, and it is a result of proving the need for substantial influencing factors that can strengthen it. On the other hand, the business model had a significant effect only on social performance, which is presumed to be the limitation of measurement tools developed for social enterprises, and the results of additional multi-group analysis to determine the cause also supported the basis for this estimation. Excluding the previous two performance factors, R&D competency, customer orientation, social network, and social mission pursuit were all found to have a significant positive (+) effect on social and economic performance. This study laid a foundation for related research by identifying high-tech social ventures emerging in the ecosystem of a social economy and expanded empirical research models related to the performance of existing social enterprises and social ventures. However, in the research method or process, there were limitations such as factor derivation or verification for balance of dual performance, subjective measurement method, and sample representativeness. It is expected that more in-depth follow-up studies will continue by supplementing future limitations and designing improved research models.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.5
• /
• pp.205-221
• /
• 2022

In this study, the authors investigated the effect of salesperson's Selling Influence Tactics (SIT) on customers' psychological obligation, trust in salespersons and repurchase intentions in the offline cosmetics purchase channel. In addition, we examined the moderating effect of service quality perceived by customers. To this end, a survey was conducted on 298 customers who had purchased cosmetics through the offline sales channel, and the authors conducted hypothesis testing through a structural equation model. As a result of the study, first, among salesperson's sales influence tactics, emotional appeal tactics (H1a), customer ingratiation tactics (H1d), and personal appeal tactics (H1e) were found to affect the psychological obligation of customers, and emotional appeal tactics (H2a), rational persuasion tactics (H2b), information provision tactics (H2c), and customer ingratiation tactics (H2d) were found to affect trust in salespeople. Third, it was found that the psychological obligation did not have a positive (+) effect on the customer's repurchase intention, and the customer's trust in the salesperson had a positive (+) effect on the repurchase intention. Third, perceived service quality showed a significant moderating effect between psychological obligation and repurchase intention, trust in salesperson and repurchase intention. In previous studies on salesperson's Selling Influence Tactics (SIT), many studies examined salesperson's Selling Influence Tactics (SIT) by specifying sub-variables in a limited way, and studies confirming marketing factors such as repurchase intention were also insufficient. Therefore, the results of the empirical research confirmed based on this study are expected to help the standard or direction of the salesperson's Selling Influence Tactics (SIT) in future studies. In addition, this study describes implications for providing help in employee education and management for small business owners who manage and operate offline cosmetics stores, and sales strategies that should be strategically established to improve perceived service quality for customers.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.3
• /
• pp.109-120
• /
• 2018

The distributional characteristics of fault segments in Cretaceous and Tertiary rocks from southeastern Gyeongsang Basin were derived. The 267 sets of fault segments showing linear type were extracted from the curved fault lines delineated on the regional geological map. First, the directional angle(${\theta}$)-length(L) chart for the whole fault segments was made. From the related chart, the general d istribution pattern of fault segments was derived. The distribution curve in the chart was divided into four sections according to its overall shape. NNE, NNW and WNW directions, corresponding to the peaks of the above sections, indicate those of the Yangsan, Ulsan and Gaeum fault systems. The fault segment population show near symmetrical distribution with respect to $N19^{\circ}E$ direction corresponding to the maximum peak. Second, the directional angle-frequency(N), mean length(Lm), total length(Lt) and density(${\rho}$) chart was made. From the related chart, whole domain of the above chart was divided into 19 domains in terms of the phases of the distribution curve. The directions corresponding to the peaks of the above domains suggest the directions of representative stresses acted on rock body. Third, the length-cumulative frequency graphs for the 18 sub-populations were made. From the related chart, the value of exponent(${\lambda}$) increase in the clockwise direction($N10{\sim}20^{\circ}E{\rightarrow}N50{\sim}60^{\circ}E$) and counterclockwise direction ($N10{\sim}20^{\circ}W{\rightarrow}N50{\sim}60^{\circ}W$). On the other hand, the width of distribution of lengths and mean length decrease. The chart for the above sub-populations having mutually different evolution characteristics, reveals a cross section of evolutionary process. Fourth, the general distribution chart for the 18 graphs was made. From the related chart, the above graphs were classified into five groups(A~E) according to the distribution area. The lengths of fault segments increase in order of group E ($N80{\sim}90^{\circ}E{\cdot}N70{\sim}80^{\circ}E{\cdot}N80{\sim}90^{\circ}W{\cdot}N50{\sim}60^{\circ}W{\cdot}N30{\sim}40^{\circ}W{\cdot}N40{\sim}50^{\circ}W$) < D ($N70{\sim}80^{\circ}W{\cdot}N60{\sim}70^{\circ}W{\cdot}N60{\sim}70^{\circ}E{\cdot}N50{\sim}60^{\circ}E{\cdot}N40{\sim}50^{\circ}E{\cdot}N0{\sim}10^{\circ}W$) < C ($N20{\sim}30^{\circ}W{\cdot}N10{\sim}20^{\circ}W$) < B ($N0{\sim}10^{\circ}E{\cdot}N30{\sim}40^{\circ}E$) < A ($N20{\sim}30^{\circ}E{\cdot}N10{\sim}20^{\circ}E$). Especially the forms of graph gradually transition from a uniform distribution to an exponential one. Lastly, the values of the six parameters for fault-segment length were divided into five groups. Among the six parameters, mean length and length of the longest fault segment decrease in the order of group III ($N10^{\circ}W{\sim}N20^{\circ}E$) > IV ($N20{\sim}60^{\circ}E$) > II ($N10{\sim}60^{\circ}W$) > I ($N60{\sim}90^{\circ}W$) > V ($N60{\sim}90^{\circ}E$). Frequency, longest length, total length, mean length and density of fault segments, belonging to group V, show the lowest values. The above order of arrangement among five groups suggests the interrelationship with the relative formation ages of fault segments.

• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.7-15
• /
• 2020

Purpose: In modern radiotherapy technology, several methods of image guided radiation therapy (IGRT) are used to deliver accurate doses to tumor target locations and normal organs, including CBCT (Cone Beam Computed Tomography) and other devices, ExacTrac System, other than CBCT equipped with linear accelerators. In previous studies comparing the two systems, positional errors were analysed rearwards using Offline-view or evaluated only with a Yaw rotation with the X, Y, and Z axes. In this study, when using CBCT and ExacTrac to perform 6 Degree of the Freedom(DoF) Online IGRT in a treatment center with two equipment, the difference between the set-up calibration values seen in each system, the time taken for patient set-up, and the radiation usefulness of the imaging device is evaluated. Materials and Methods: In order to evaluate the difference between mobile calibrations and exposure radiation dose, the glass dosimetry and Rando Phantom were used for 11 cancer patients with head circumference from March to October 2017 in order to assess the difference between mobile calibrations and the time taken from Set-up to shortly before IGRT. CBCT and ExacTrac System were used for IGRT of all patients. An average of 10 CBCT and ExacTrac images were obtained per patient during the total treatment period, and the difference in 6D Online Automation values between the two systems was calculated within the ROI setting. In this case, the area of interest designation in the image obtained from CBCT was fixed to the same anatomical structure as the image obtained through ExacTrac. The difference in positional values for the six axes (SI, AP, LR; Rotation group: Pitch, Roll, Rtn) between the two systems, the total time taken from patient set-up to just before IGRT, and exposure dose were measured and compared respectively with the RandoPhantom. Results: the set-up error in the phantom and patient was less than 1mm in the translation group and less than 1.5° in the rotation group, and the RMS values of all axes except the Rtn value were less than 1mm and 1°. The time taken to correct the set-up error in each system was an average of 256±47.6sec for IGRT using CBCT and 84±3.5sec for ExacTrac, respectively. Radiation exposure dose by IGRT per treatment was measured at 37 times higher than ExacTrac in CBCT and ExacTrac at 2.468mGy and 0.066mGy at Oral Mucosa among the 7 measurement locations in the head and neck area. Conclusion: Through 6D online automatic positioning between the CBCT and ExacTrac systems, the set-up error was found to be less than 1mm, 1.02°, including the patient's movement (random error), as well as the systematic error of the two systems. This error range is considered to be reasonable when considering that the PTV Margin is 3mm during the head and neck IMRT treatment in the present study. However, considering the changes in target and risk organs due to changes in patient weight during the treatment period, it is considered to be appropriately used in combination with CBCT.

• Investigative Magnetic Resonance Imaging
• /
• v.22 no.1
• /
• pp.1-9
• /
• 2018

Purpose: This study was designed to optimize the flip angle (FA) and scan timing of the hepatobiliary phase (HBP) using the 3D T1-weighted, gradient-echo (GRE) imaging with controlled aliasing in parallel imaging results in higher acceleration (CAIPIRINHA) technique on gadoxetic acid-enhanced 3T liver MR imaging. Materials and Methods: Sixty-two patients who underwent gadoxetic acid-enhanced 3T liver MR imaging were included in this study. Four 3D T1-weighted GRE imaging studies using the CAIPIRINHA technique and FAs of $9^{\circ}$ and $13^{\circ}$ were acquired during HBP at 15 and 20 min after intravenous injection of gadoxetic acid. Two abdominal radiologists, who were blinded to the FA and the timing of image acquisition, assessed the sharpness of liver edge, hepatic vessel clarity, lesion conspicuity, artifact severity, and overall image quality using a five-point scale. Quantitative analysis was performed by another radiologist to estimate the relative liver enhancement (RLE) and the signal-to-noise ratio (SNR). Statistical analyses were performed using the Wilcoxon signed rank test and one-way analysis of variance. Results: The scores of the HBP with an FA of $13^{\circ}$ during the same delayed time were significantly higher than those of the HBP with an FA of $9^{\circ}$ in all the assessment items (P < 0.01). In terms of the delay time, images at the same FA obtained with a 20-min-HBP showed better quality than those obtained with a 15-min-HBP. There was no significant difference in qualitative scores between the 20-min-HBP and the 15-min-HBP images in the non-liver cirrhosis (LC) group except for the hepatic vessel clarity score with $9^{\circ}$ FA. In the quantitative analysis, a statistically significant difference was found in the degree of RLE in the four HBP images (P = 0.012). However, in the subgroup analysis, no significant difference in RLE was found in the four HBP images in either the LC or the non-LC groups. The SNR did not differ significantly in the four HBP images. In the subgroup analysis, 20-min-HBP imaging with a $13^{\circ}$ FA showed the highest SNR value in the LC-group, whereas 15-min-HBP imaging with a $13^{\circ}$ FA showed the best value of SNR in the non-LC group. Conclusion: The use of a moderately high FA improves the image quality and lesion conspicuity on 3D, T1-weighted GRE imaging using the CAIPIRINHA technique on gadoxetic acid, 3T liver MR imaging. In patients with normal liver function, the 15-min-HBP with a $13^{\circ}$ FA represents a feasible option without a significant decrease in image quality.

• Journal of Food Hygiene and Safety
• /
• v.20 no.4
• /
• pp.244-252
• /
• 2005

This study was performed far development of new analytical method of beet red in foods. In this study, analysis of beet red in foods has been carried out by detection of betanine and isobetanine, the main color component of beet red as indicator compounds. The qualitative analysis technique consisted of clean-up of the colors with a $C_{18}$ cartridge, separation of the colors by cellulose TLC plate using acetone:3-methyl-1-butanol:distilled water (7:7:6) as a solvent system. Also, the quantitative analysis was performed using X-terra RP at wavelength 538 nm and $0.1\%$ phosphoric acid : methanol (90:10) as a solvent. The quantitative results of beet .ed were as follows:900.22$\∼$27701.60 $\mu$g/g for 60 item in nutrient supplement food, $21.95\∼713.40{\mu}g/g$ for 30 items and N.D. for 18 items in cindy, and $155.85{\∼}505.37{\mu}g/g$ for 12 items in ice creams, $43.52\∼64.75{\mu}g/g$ for 18 items and N.D. for 54 item in sauce, N.D. for 12 items in retort food.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.1
• /
• pp.29-36
• /
• 2004

This study deals with an analysis on the sinking resistance for the model purse seine, in the case of different netting material and sinkers. The experiment was carried out using rune simplified model seines of knotless nettings. Dimension of model seines 420cm for corkline and 85cm for seine depth, three groups of models rigged 25, 45 and 60g with the same weighted sinkers in water were used. These were named PP-25, PA-25, PES-25, PP-45, PA-45, PES-45, PP-60, PA-60 and PES-60 seine. The densitie($\rho$) of netting materials were 0.91g/cm$cm^3$, 1.14g/cm$cm^3$ and 1.38g/cm$m^3$. Experiments carried out in the observation channel in a flume tank under still water conditions. Sinking motion was recorded by the one set of TV-camera for VTR, and reading coordinate carried out by the video digitization system. Differential equations were derived from the conservation of momenta of the model purse seines and used to determine the sinking speeds of the depths of leadline and the other portions of the seines. An analysis carried out by simultaneous differential equations for numerical method by sub-routine Runge-Kutta-Gill The results obtained were as follows : 1. Average sinking speed of leadline for the model seines rigged 60g with the same weighted sinkers in water was fastest for 12.2cm/sec of PES seine, followed by 11.4cm/sec of PA and 10.7cm/sec of PP seines. 2. The coefficient of resistance for netting of seine was estimated to be $K_D=0.09(\frac{\rho}{\rho_w})^4$ 3. The coefficient of resistance for netting bundle of seine was estimated to be $C_R=0.91(\frac{\rho}{\rho_w})$ 4. In all seines, the calculated depths of leadline closely agreed with the measured ones, each 25g, 45g, 60g of weighted sinkers were put into formulas meas.=1.04cal., meas.=0.99cal. and meas.=0.98 cal.

• Applied Microscopy
• /
• v.31 no.1
• /
• pp.101-108
• /
• 2001

Five kinds of neurosecretory cells (type-A, B, C, D and E) and neuropiles surrounding them were observed in the visceral ganglion and the right parietal ganglion of the African giant snail, Achatina fulica, by transmission electron microscopy. Type-A cells (diameter, $35{\mu}m$) are the most popular cells in the cortex of the two ganglions, which are of triangular or irregular forms. In their cytoplasm, there are found large granules of 1 fm in diameters and small round granules of about $0.1{\mu}m$ in diameters. Small granules are classified into the ones of high electron density and the others of middle electron density. Type-B cells (diameter, $19\times12{\mu}m$) are evenly distributed over various portions of cortex and medulla of the two ganglions. They are similar to type-A cells in shapes. The cytoplasm of type-B cells is crowded with high electron dense granules of about $0.1{\mu}m$. Round granules of about $0.7{\mu}m$ in diameters are also found but rarely. Type-C cells are the smallest cells whose sizes are about $8\times6{\mu}m$. Each of them contains a large nucleus of about $6\times5{\mu}m$. Its cytoplasm is full of electron dense granules of about $0.23{\mu}m$, each of which is artually an assembly of tiny granules of about $0.03{\mu}m$. Type-D cells are middle-size cells of about $28\times20{\mu}m$, which take ellipsoidal or irregular forms. They are found in the cortex more than in the medulla. Their cytoplasm looks dark due to the high electron density and, in it, two kinds of round granules whose sizes are $1.6{\mu}m$fm and $0.6{\mu}m$, respectively, are observed. Type-E cells are large cells of about $100\times50{\mu}m$, which are rarely found in the upper and middle portions of the two ganglions. The nucleus of the cell, which is very large $(70\times30{\mu}m)$ for the cytoplasm, contains electron dense round granules of diverse sizes (diameters, $1\sim0.2{\mu}m$). The surface of the cell protrudes filopodia of various forms and phagocytizes decrepit cells. Neuropiles are surrounding the neurosecretory cells. In nerve fibers, synaptic vesicles are observed, which are classified into six classes according to their electron densities , sizes and shapes.