• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7443-7450
• /
• 2014

To resolve shortcomings of high-rate anaerobic processes, such as high upward flow velocity, this study sought to improve the structure of the high-rate anaerobic reactor and evaluate its performance. The improved reactor was manufactured by adjusting the diameter and dividing the reactor into three parts. The evaluation of the structurally improved reactor revealed that the reactor could stabilize a single circuit, and prevent the accumulation of solid matter and leakage of microbes, thereby stabilize the microbes. In the process of anaerobic digestion, an increase in pH and alkalinity within the reactor was presumably attributed to bicarbonate created in the process of organic matter decomposition and due to the re-dissolution of some biogas. To maintain a high rate of organic matter removal, the reactor should be operated with more than 9 hrs of HRT and an organic matter load of under $10.kgTCODcr/m^3{\cdot}d$. The methane gas generated in the anaerobic digestion process showed a high content of 65~83 % at the organic matter load of over $7.7kgTCODcr/m^3{\cdot}d$. per removal of CODcr. The methane quantity was generated at $0.10{\sim}0.23m^3CH_4/kgCOD_{rem}$, showing that it was smaller than the theoretical methane generation amount (0.35) in the STP state. In the latter part of high-rate anaerobic process, an advanced treatment process was required to remove nitrogen.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.35-42
• /
• 2010

The rapid economic development induced the massive road constructions, becoming bigger and high-speed of the vehicles. However, it brings lots of social problems, such as air pollutions, traffic noise and vibration. Special concrete block for the base course of asphalt pavement is needed to decrease traffic noise such as tire's explosive and vehicles sound, applying Helmholtz Resonators theory to asphalt pavement. If it is applied to the area where it happens considerable noise such as a junction, the street of a housing complex and a residential street, it is one of considerable method to solve the social requirements of noise problem. This research examines couple of laboratory tests for the sound absorption effect of the concrete block and the base concrete block. There are specimens which is fixed hall-size, space, depth as the condition of this research, and these are analysed of noise decrease effect using different condition of the first noise of each vehicle. As a result of analysis data according to vehicle noise volume, measurement distance, a form and size of the hall using the base concrete block, the use of special concrete base showed a good alternative solution for decreasing traffic noise level, from 4 dB to 9 dB.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.50-57
• /
• 2016

Pipeline is one of the most abundant components in petrochemical plant. It plays a critical role in transporting fluids. Some pipelines are thermally insulated by wrapping them with insulating materials to prevent the loss of energy. However, when corrosion begins under insulation, it cannot be easily seen without unwrapping the cover, and thus corrossion should be detected using a non-destructive ways such as ultrasound guided wave. In this paper, the piping where the CUI (Corrosion Under Insulation) which occurs in the insulation parts guided waves effectively the optimum condition which is theoretical for selected guided waves phase velocity dispersion curve and wave-structure. The results of this study are expected to be directly utilized for onsite inspection of pipeline's CUI in many petrochemical plants.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.157-164
• /
• 2021

The purpose of this study was to elucidate the relationship between the brain dominant thinking type and empathy ability of nursing students. The subjects of this study were a total of 90 students enrolled in the 3rd year of the nursing department, who were subjected to Herrmann's BDI as a brain dominant thinking type test. The empathy test was conducted using the Interpersonal Response Index(IRI) adapted by Park(2004). For data analysis, Pearson correlation analysis and multivariate analysis were performed. As a result of the analysis, the dominant brain thinking type of nursing students was in quadrant C the most. And there was a statistically significant positive relationship between the brain dominance type and empathy in the C quadrant(r=.38) and D quadrant(r=.54). The overall empathy ability was highest in the D quadrant, and there was a statistically significant difference in the overall empathy ability according to the brain dominant thinking type(F=4.95, p<.01). Based on the results of this study, it is intended to be used in theoretical and practical education for nurse nurturing to improve empathy ability of nursing students.

• Korean Journal of Culture and Social Issue
• /
• v.28 no.4
• /
• pp.749-772
• /
• 2022

This study aimed at investigating the validity of WHR (or waist-to-hip ratio) and Golden ratio as standards of physical attractiveness. Each of 60 male and 60 female college students were divided into two groups of 30. Using the 3D game program, each person in one group drew a physically attractive figure of the opposite sex while the other group drew a physically attractive figure of the same sex. Then, WHR and Golden ratio of the figures were measured and compared with the ideal WHR (.7 for women and .9 for men) and Golden ratio 1.618. It was found that WHR and Golden ratio for the physically attractive figures were lower than the ideal standards regardless of the participant's gender. That is, the participants preferred to men and women having curvaceous body shapes with a narrow waist and a wide pelvis. In most cases, Golden ratios measured in many ways were not correspondent to the ideal ratio, 1.618. In regards to BR (or Body Ratio), the legs and waist of the physically attractive figures were shorter relative to the Golden ratio and this was more salient for physically attractive man figures. Regarding the facial ratio measured by FR(or facial ratio) and FR_VP(or facial ratio_vertical point), the faces of figures made by participants, regardless of their sex, were shorter and wider compared to the Golden ratio. Further, the participants preferred baby-faced woman and masculine man figures. Finally, implications of the findings, limitations the of the present study, and the suggestions for future research were discussed.

• Journal of Intelligence and Information Systems
• /
• v.28 no.3
• /
• pp.237-258
• /
• 2022

As the global market environment changes, the domestic ICT industry has a growing influence on the world economy. This industry is regarded as an important driving force in the national economy from a technological and social point of view. In particular, small and medium-sized enterprises (SMEs) in the ICT industry are regarded as essential actors of domestic economic development in terms of company diversity, technology development and job creation. However, since it is small compared to large-sized enterprises, it is difficult for SMEs to survive with a differentiated strategy in an incomplete and rapidly changing environment. Therefore, SMEs must make a lot of efforts to improve their own capabilities, and the government needs to provide the desirable help suitable for corporate internal resources so that they can continue to be competitive. This study classifies the types of ICT SMEs participating in government support programs, and analyzes the relationship between resources and performance creation of each type. The data from the "ICT Small and Medium Enterprises Survey" conducted annually by the Ministry of Science and ICT was used. In the first stage, ICT SMEs were clustered based on common factors according to their experiences with government support programs. Three clusters were meaningfully classified, and each cluster was named "active participation type," "initial support type," and "soloist type." As a second step, this study compared the characteristics of each cluster through profiling analysis for each cluster. The third step carried out in this study was to find out the mechanism of R&D performance creation for each cluster through regression analysis. Different factors affected performance creation for each cluster, and the magnitude of the influence was also different. Specifically, for "active participation type", "current manpower", "technology competitiveness", and "R&D investment in the previous year" were found to be important factors in creating R&D performance. "Initial support type" was identified as "whether or not a dedicated R&D organization exists", "R&D investment amount in the previous year", "Ratio of sales to large companies", and "Ratio of vendors supplied to large companies" contributed to the performance. Lastly, in the case of "soloist type", "current workforce" and "future recruitment plan", "technological competitiveness", "R&D investment", "large company sales ratio", and "overseas sales ratio" showed a significant relationship with the performance. This study has practical implications of showing what strategy should be established when supporting SMEs in the future according to the government's participation in the startup program and providing a guide on what kind of support should be provided.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.120-130
• /
• 1999

In this paper, we show that the instantaneous phase current of the bifiler-wound hybrid stepping motor is dependent of lead angle and that the information of motor position is obtained from the instantaneous phase current at ${\pi}/2$ by the theoretical formular and its computer simulation results. From the facts, we design the microcontroller-based motor position sensorless controller of optimal lead angle, which generates the excitation pulses for the closed-loop drives. The controller is consist of microcontroller which has the function of A/D converter, programmable input/output timer, and the transfer table which has the values of optimal lead angle depending on motor velocity, and ROM which has the transfer table of the values of lead angle depending on velocity of motor and the values of instantaneous phase current at ${\pi}/2$. From the design of microcontroller-based controller, we minimize the external interface circuit and obtain flexibility by changing the contents of ROM transfer tables and the control software. We confirm that the designed controller drives the bifilar-wound hybrid stepping motor is the mode of optimal lead angle by comparing the instananeous phase current experimental results and computer simulation results.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.9
• /
• pp.47-56
• /
• 2004

A new fragmentation model, called the GRS (the generation model of weathered residual soils) model, was proposed in this study, This model could identify the formation of a residual soil. This model is based on the phenomena that as the soil was weathered more highly, soil particles were smaller and pores were more expanded simultaneously. The possibility of fragmentation, $P_F,$ which was based on the fractal theory, was introduced in this model. There were some fundamental notions in the GRS model that soil particles were generated as the rock is fragmented, and the fragmentation of the rock was performed step by step. The $P_F,$ of the rock was not constant at each fragmentation steps. As a result of application on the GRS model, there were more residue where $P_{Fi}s$ were small at any particle size. There was a S-shape of PSD curve at the concave shape of $P_{Fi},$ and the PSD curve goes to a gaped graded curve at the convex shape of $P_{Fi}.$ The shape of PSD curve was concave in the case of small $P_{Fi}s.$ The value of $P_{Fi}$ increased with the coefficient of uniformity $(C_u)$ and the fragmentation fractal dimension $(D_r),$ but had no relation with the coefficient of gradation $(C_C)$.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.361-368
• /
• 2019

Aid to Navigation (AtoN) is the artificial facilities to facilitate the ship's safe navigation using light, shape, color, sound, and radio waves. IALA has developed and operated the educational course for expert groups for the design, deployment, and management of AtoN. Also, maritime educational institutes have operated various educational courses for safe navigation through the ship's operation and ECDIS curriculum for seafarers. However, education using the AtoN Simulator System is needed to prevent marine accidents caused by misunderstanding of the AtoN according to various topographical, environmental, and maritime traffic environments. In this study, the existing ship handling simulator and AtoN simulator were applied to develop educational modules for accurate understanding and application of AtoN in various environments, enhancing the quality of education from the existing theoretical point of view and improving practical use to maximize educational efforts.

• Journal of Broadcast Engineering
• /
• v.20 no.5
• /
• pp.667-675
• /
• 2015

As the interest on the high-definition and high-quality broadcasting is increased, the request on the high quality sound signal is enlarged as well as on the video signal's quality. One factor contributing to the high-quality of audio signal is an expansion of reproduction channels like 10.2channel and 22.2channel, but there is a problem of speaker installation issue of these many channels. One solution to solve this problem, we can use frontal loudspeaker array reproduction technique making virtual surround sound. So in this paper, we introduce theocratical analysis on the Wave Field Synthesis used for speaker array based sound reproduction and also present the result about the subjective listening test of reproduction performance based on this technique to check the perfoemance of this system. As a result, we showed WFS based frontal loudspeaker array reproduction method could provide sufficient performance compared to conventional discrete 5.1 channel reproduction method.