• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.4
• /
• pp.75-82
• /
• 2001

Static loadings on ship structure induced either by water pressure before service such as a tank test and ballasting or by cargo pressure during first laden voyage cause relatively much greater stress than dynamic loadings induced by wave. With these static pre-loadings, the initial residual stresses around welded joint, where fatigue strength is concerned(in most cases, where stress concentration occurs) are expected to be shaken-down in a great extent by the elasto-plastic deformation behavior of material. Therefore, it is more resonable to assess the fatigue strength of ship structure with S-N data which have taken into account the effect of shaken-down residual stresses(re-distributed stresses) on the fatigue strength. In this research work, the re-distribution of residual stresses by the tensile pre-loading is measured using an ordinary sectioning method for specimens of padding plate weldment. Fatigue tests are performed also to evaluate the fatigue strength of the both as-welded and pre-loaded specimens.

• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.76-82
• /
• 2002

This study was to investigate the productivity of 30-year-old Quercus mongolica forest in the Experimental Forest of Seoul National University located in Mt. Taehwa, Kyonggi-do, Korea. Eight sample trees were selected and cut off. Stem, branches and leaves were weighed respectively with the stratified clipping method, and analyzed for productive struts lure. The allometric regression equations between dry weight of each component(stem, branches, and needles) and D$^2$H were obtained. The results obtained are summarized as follows; (1) Photosynthetic layer of Quercus mongolica was shown at about 4m in height, and maximum needle amount of crown at 10m in height. (2) The total biomass of aboveground was 67.886ton/ha(75.5% from stem, 19.4% from branches and 5.1% from needles). (3) Annual net production of aboveground was 12.76ton/ha/yr, and the ratios of stem, branches and needles to that of aboveground, 44.1%, 28.7% and 27.2%, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.1
• /
• pp.33-37
• /
• 2013

In this research, we investigated the effect of mole concentration of precursor on morphological, structural and optical properties of ZnO nanorods. ZnO nanorods were hydrothermally grown on c-plane sapphire substrates in aqueous solution which contains zinc nitrate hexahydrate and hexamethylenetetramine at 90oC in the precursor range of 0.01 M to 0.025 M. With the increase of mole concentration, length and diameter of ZnO nanorods increased. In all the conditions, the growth direction of rods was longitudinally c-axis direction. From the strong emission peak at 380 nm of PL spectra at room temperature, we could confirm that the crystal quality of ZnO nanorods is good to emit radiative recombination spectra.

• Korean Journal of Occupational Health Nursing
• /
• v.17 no.1
• /
• pp.5-13
• /
• 2008

Purpose: The purpose of this study is to identify Activities of Daily Living(ADL) of industrial accident disabled with a caregiver and to evaluate the degree of satisfaction with services according to kinds of caregiver, professional or non-professional. Method: Data was collected from 178 patients in three workers' accident medical corporations of H, A and D cities from July to August, 2006. Five inspectors interviewed with the disabled by visiting the hospital. Collected data was analyzed for the frequency, percentages, t-test, etc. Results: The average score of ADL which ranged from 1 to 7 was 3.6. The 51.5 percent of caregivers for industrial accident disabled were non-professional and the 48.5 percent of caregivers were professional. 50.9 percent of the reason for the family caregivers was because of economical one. The caregiver satisfaction degree was 3.7 out of 4. The satisfaction degree with the professional caregivers was significantly higher than that with non-professional family caregivers for their excellent knowledge and techniques. Conclusion: A nursing expenses for the industrial accident disabled was intended to provide appropriate nursing services for the patient and so, it should not be a kind of income. So, the system for caring services should be investigated and the qualification of caregivers should be classified according to the health condition of the patient or ADL.

• Steel and Composite Structures
• /
• v.1 no.4
• /
• pp.427-440
• /
• 2001

The growing use of unprotected or partially protected steelwork in buildings has caused a lively debate regarding the safety of this form of construction. A good deal of recent research has indicated that steel members have a substantial inherent ability to resist fire so that additional fire protection can be either reduced or eliminated completely. A performance based philosophy also extends the study into the effect of structural continuity and the performance of the whole structural totality. As part of the structural system, thermal expansion during the heating phase or contraction during the cooling phase in most beams is likely to be restrained by adjacent parts of the whole system or sub-frame assembly due to compartmentation. This has not been properly addressed before. This paper describes an experimental programme in which unprotected steel beams were tested under load while it is restrained between two columns and additional horizontal restraints with particular concern on the effect of catenary action in the beams when subjected to large deflection at very high temperature. This paper also presents a three-dimensional mathematical modelling, based on the finite element method, of the series of fire tests on the part-frame. The complete analysis starts with an evaluation of temperature distribution in the structure at various time levels. It is followed by a detail 3-D finite element analysis on its structural response as a result of the changing temperature distribution. The principal part of the analysis makes use of an existing finite element package FEAST. The effect of columns being fire-protected and the beam being axially restrained has been modelled adequately in terms of their thermal and structural responses. The consequence of the beam being restrained is that the axial force in the restrained beam starts as a compression, which increases gradually up to a point when the material has deteriorated to such a level that the beam deflects excessively. The axial compression force drops rapidly and changes into a tension force leading to a catenary action, which slows down the beam deflection from running away. Design engineers will be benefited with the consideration of the catenary action.

• Structural Engineering and Mechanics
• /
• v.56 no.5
• /
• pp.813-833
• /
• 2015

Spherical reticulated shells are widely applied in structural engineering due to their good bearing capability and attractive appearance. Parametric modeling of spherical reticulated shells is the basis of internal analysis and optimization design. In the present study, generation methods of nodes and the corresponding connection methods of rod elements are proposed. Modeling programs are compiled by adopting the ANSYS Parametric Design Language (APDL). A shape optimization method based on the two-stage algorithm is presented, and the corresponding optimization program is compiled in FORTRAN environment. Shape optimization is carried out based on the objective function of the minimum total steel consumption and the restriction condition of strength, stiffness, slenderness ratio, stability. The shape optimization of four typical Schwedler spherical reticulated shells is calculated with the span of 30 m~80 m and rise to span ratio of 1/7~1/2. Compared with the shape optimization results, the variation rules of total steel consumption along with the span and rise to span ratio are discussed. The results show that: (1) The left and right rod-Schwedler spherical reticulated shell is the most optimized and should be preferentially adopted in structural engineering. (2) The left diagonal rod-Schwedler spherical reticulated shell is second only to left and right rod regarding the mechanical behavior and optimized results. It can be applied to medium and small-span structures. (3) Double slash rod-Schwedler spherical reticulated shell is advantageous in mechanical behavior but with the largest total weight. Thus, this type can be used in large-span structures as far as possible. (4) The mechanical performance of no latitudinal rod-Schwedler spherical reticulated shell is the worst and with the second largest weight. Thus, this spherical reticulated shell should not be adopted generally in engineering.

• Women's Health Nursing
• /
• v.9 no.2
• /
• pp.128-137
• /
• 2003

The purpose of this study was to identify effects of the SP-6 acupressure on dysmenorrhea, skin temperature at th e CV2 acupoint. This study was a pretest-post test study design wit h a nonequivalent control group. Data were collected from May 1 to August 31, 2002. A total of 58 female student s from two universities participated in the study. Among them, 30 female students were assigned as the experimental group an d the other 28 students to the control group. Both groups were pretested before the intervention for three variables, the degree of dysmenorrhea, and skin temperature at the CV2 acupoint. Then, the SP-6 acupressure was provided for 20 minutes for students in the experimental group. The instruments used in this study included the Visual Analogue Scale developed by Johnson(1974), skin thermometer by Simson Eectric CO., Menstrual Attitudes Questionnaire Scale developed by Brooks-Gunn & Ruble(1980), and Stress scale developed by Chun and Kim(1990). The data were analyzed with the SAS program using Chi-square test, t-test, and ANCOVA and Bonferroni method were used to determine significant differences between the two groups. The results of this study are as follows ; 1. There was a statistically significant difference in the intensity of dysmenorrhea after the intervention with the experimental group having a lower intensity than the control group. 2. There was a statistically significant difference in skin temperature at the CV2 acupoint 30min (F=4.87, p=0.03) after the intervention with the experimental group having a higher temperature. In conclusion, the SP-6 acupressure has proved to be an effective nursing intervention to reduce dysmenorrhea. Therefore, it is recommended women suffering from dysmenorrhea use the SP-6 acupressure.

• Journal of Ginseng Research
• /
• v.44 no.5
• /
• pp.717-724
• /
• 2020

Background: Malignant arrhythmias require drug therapy. However, most of the currently available antiarrhythmic drugs have significant side effects. Ginsenoside Rg2 exhibits excellent cardioprotective effects and appears to be a promising candidate for cardiovascular drug development. So far, the oral toxicity and antiarrhythmic effects of Rg2 have not been evaluated. Methods: Acute oral toxicity of Rg2 was assessed by the Limit Test method in mice. Subchronic oral toxicity was determined by repeated dose 28-day toxicity study in rats. Antiarrhythmic activities of Rg2 were evaluated in calcium chloride-induced arrhythmic rats. Antiarrhythmic mechanism of Rg2 was investigated in arrhythmic rats and H9c2 cardiomyocytes. Results: The results of toxicity studies indicated that Rg2 exhibited no single-dose (10 g/kg) acute oral toxicity. And 28-day repeated dose treatment with Rg2 (1.75, 3.5 and 5 g/kg/d) demonstrated minimal, if any, subchronic toxicity. Serum biochemical examination showed that total cholesterol in the high-dose cohort was dramatically decreased, whereas prothrombin time was increased at Day 28, suggesting that Rg2 might regulate lipid metabolism and have a potential anticoagulant effect. Moreover, pretreatment with Rg2 showed antiarrhythmic effects on the rat model of calcium chloride induced arrhythmia, in terms of the reduced duration time, mortality, and incidence of malignant arrhythmias. The antiarrhythmic mechanism of Rg2 might be the inhibition of calcium influx through L-type calcium channels by suppressing the phosphorylation of Ca²⁺/calmodulin-dependent protein kinase II. Conclusion: Our findings support the development of Rg2 as a promising antiarrhythmic drug with fewer side effects for clinical use.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.286-292
• /
• 2016

This study evaluates the change of computer tomography (CT) number in the case of the metal artifact reduction (MAR) algorithm, using the phantom. The images were obtained from dual CT using a gammex 467 tissue characterization phantom, which is similar to human tissues. The test method was performed by dividing pre and post MAR algorithm and measured CT values of nonmagnetic materials within the phantom. In addition, the changes of CT values for each material were compared and analyzed after measuring CT values up to 140 keV, using the spectral HU curve followed by CT scan. As a result, in the cases of N rod (trabecular bone) and E rod (trabecular bone), the CT numbers decreased as keV increasing but were constant above 90 keV. In the cases of I rod (dense bone) and K rod (dense bone), the CT numbers also decreased as keV increased but were uniform above 90 keV. The CT numbers from 40 keV to 140 keV were consistent in the cases of J rod (liver), D rod (liver), L rod (muscle), and F rod (muscle). For A rod (adipose), G rod (adipose), B rod (breast) and O rod (breast), the CT numbers increased as keV increased but were constant after 90 keV. The CT numbers from 40 keV to 140 keV were consistent in the cases of C rod (lung (exhale)), P rod (lung (exhale)), M rod (lung (inhale)) and H rod (lung (exhale)). Conclusively, because dual CT exhibits no changes in image quality and is able to analyze nonmagnetic materials by measuring the CT values of various materials, it will be used in the future as a useful tool for the diagnosis of lesions.

• Korean Journal of Materials Research
• /
• v.21 no.6
• /
• pp.327-333
• /
• 2011

Nanostructured cobalt materials have recently attracted considerable attention due to their potential applications in high-density data storage, magnetic separation and heterogeneous catalysts. The size as well as the morphology at the nano scale strongly influences the physical and chemical properties of cobalt nano materials. In this study, cobalt nano particles synthesized by a a polyol process, which is a liquid-phase reduction method, were investigated. Cobalt hydroxide ($Co(OH)_2$), as an intermediate reaction product, was synthesized by the reaction between cobalt sulphate heptahydrate ($CoSO_4{\cdot}7H_2O$) used as a precursor and sodium hydroxide (NaOH) dissolved in DI water. As-synthesized $Co(OH)_2$ was washed and filtered several times with DI water, because intermediate reaction products had not only $Co(OH)_2$ but also sodium sulphate ($Na_2SO_4$), as an impurity. Then the cobalt powder was synthesized by diethylene glycol (DEG), as a reduction agent, with various temperatures and times. Polyvinylpyrrolidone (PVP), as a capping agent, was also added to control agglomeration and dispersion of the cobalt nano particles. The optimized synthesis condition was achieved at $220^{\circ}C$ for 4 hours with 0.6 of the PVP/$Co(OH)_2$ molar ratio. Consequently, it was confirmed that the synthesized nano sized cobalt particles had a face centered cubic (fcc) structure and with a size range of 100-200 nm.