• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.493-500
• /
• 2019

In this study, sensitivity analysis of sediment transport scaling factors in Delft3D-Morphology was performed to examine the effect those parameters on simulation results of cross-shore profile changes. For numerical experiments, one-year wave time series data which were observed in 2018 on the Maengbang coast in Gangwon prefecture were applied as external force. Bathymetric data observed in January and October of the same year were used as initial bathymetric data and annual bathymetric change data, respectively. The simulation performance of the model was evaluated based on the Brier Skill Score index for each part by dividing an arbitrary cross section within the calculation domain into the onshore and offshore parts. As a result, it was found thet the f_BED variable has a slight effect on the simulation results. The f_BEDW and f_SUSW variables show good simulation performance in onshore part when the value less than 0.5 is applied and vice versa. Among the experimental conditions, the optimal combinations of variables are f_BED = 1.0, f_BEDW = 1.0, f_SUSW = 0.1 for the onshore region and f_BED = 1.0, f_BEDW = 1.0, f_SUSW = 0.5 for the offshore region. However, since these combinations were derived based on the observation data on Maengbang beach in 2018, users should be careful when applying those results to other areas.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.31-38
• /
• 2005

In this paper, the combustion characteristics of a hybrid propulsion system were studied with various L/D(length vs diameter) ratio of the single po.1 type solid fuel. Experiments were performed for 2 cases with the fixed grain port diameter and fuel length respectively. For the first case, results show that there are no large variations for regression rates as the L/D ratio changes. And as the L/D ratio increases, the O/F ratio decreases and thrust, characteristic velocity tends to increase. For the second case, there is no large change for O/F ratio, thrust and characteristic velocity as L/D ratio changes. On the other hand, as the L/D ratio decreases, only the regression rate tends to increase. Experimentally, exponent n in $\dot{r}=a{G_0}^n$ was found about 0.5 and then the O/F ratio was shown nearly constant. In the experiment, PE and gas oxygen were used as a fuel and an oxidizer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.4
• /
• pp.156-160
• /
• 1982

A Comb Filter(C.F.) is constucted with a N-stages one-dimensional B.B.D.(Bucket-Brigade Device) delay line. One channel of the B.P.F. (Band Pass Filter) Bank is experimented, which includes a R.F.(Recursie Filter) using S/H circuits cascaded to the C.F. This algorithm of the C.F.B.(Comb Filter Bank) becomes the parallel spectrum analyzer circuit. The algorithm has less number of multiplication than that of FFT and improves the SNR.

• Journal of the Chungcheong Mathematical Society
• /
• v.34 no.2
• /
• pp.119-129
• /
• 2021

In this paper, we introduce the concept of a generalized right f-derivation associated with a derivation d and a function f in 𝚪-incline algebras and give some properties of 𝚪-incline algebras. Also, the concept of d-ideal is introduced in a 𝚪-incline algebra with respect to right f-derivations.

• Journal of applied mathematics & informatics
• /
• v.33 no.1_2
• /
• pp.173-183
• /
• 2015

A radio k-labeling f of a graph G is a function f from V (G) to $Z^+{\cup}\{0\}$ such that $d(x,y)+{\mid}f(x)-f(y){\mid}{\geq}k+1$ for every two distinct vertices x and y of G, where d(x, y) is the distance between any two vertices $x,y{\in}G$. The span of a radio k-labeling f is denoted by sp(f) and defined as max$\{{\mid}f(x)-f(y){\mid}:x,y{\in}V(G)\}$. The radio k-labeling is a radio labeling when k = diam(G). In other words, a radio labeling is an injective function $f:V(G){\rightarrow}Z^+{\cup}\{0\}$ such that $${\mid}f(x)=f(y){\mid}{\geq}diam(G)+1-d(x,y)$$ for any pair of vertices $x,y{\in}G$. The radio number of G denoted by rn(G), is the lowest span taken over all radio labelings of the graph. When k = diam(G) - 1, a radio k-labeling is called a radio antipodal labeling. An antipodal labeling for a graph G is a function $f:V(G){\rightarrow}\{0,1,2,{\ldots}\}$ such that $d(x,y)+{\mid}f(x)-f(y){\mid}{\geq}diam(G)$ holds for all $x,y{\in}G$. The radio antipodal number for G denoted by an(G), is the minimum span of an antipodal labeling admitted by G. In this paper, we investigate the exact value of the radio number and radio antipodal number for the circulant graphs G(4k + 2; {1, 2}).

• Journal of the Korean Mathematical Society
• /
• v.32 no.1
• /
• pp.51-60
• /
• 1995

Let $(M,g_M,F)$ be a (p+q)-dimensional connected Riemannian manifold with a foliation $F$ of codimension q and a complete bundle-like metric $g_M$ with respect to $F$. Let $Ric_D$ be the transverse Ricci field of $F$ with respect to the transverse Riemannian connection D which is a torsion-free and $g_Q$-metrical connection on the normal bundle Q of $F$. We consider transverse confomal (or, projective) fields of $F$. It is clear that a tranverse Killing field s of $F$ preserves the transverse Ricci field of $F$, that is, $\Theta(s)Ric_D = 0$, where $\Theta(s)$ denotes the transverse Lie differentiation with respect to s.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2004.05a
• /
• pp.48-56
• /
• 2004

To perform R&D program, it is necessary to invest input factor(I/F). And these factor are converted to output factors(O/F) at the end of R&D program. Pee. reviewers evaluate output factors and produce evaluation grades(E/G). This paper try to analyze the relationship to I/F, O/F and E/G, According to the analysis results, the relation between I/F and E/G is as weak as the relation between O/F and E/G. The strength of relationship is relatively very strong in the relation between I/F and O/F

• Journal of Music and Human Behavior
• /
• v.13 no.2
• /
• pp.67-83
• /
• 2016

This study investigated the tonal characteristics in Korean emotion words by analyzing the pitch patterns transformed from word utterance. Participants were 30 women, ages 19-23. Each participant was instructed to talk about their emotional experiences using 4-syllable target words. A total of 180 utterances were analyzed in terms of the frequency of each syllable using the Praat. The data were transformed into meantones based on the semi-tone scale. When emotion words were used in the middle of a sentence, the pitch pattern was transformed to A3-A3-G3-G3 for '즐거워서(joyful)', C4-D4-B3-A3 for '행복해서(happy)', G3-A3-G3-G3 for '억울해서(resentful)', A3-A3-G3-A3 for '불안해서(anxious)', and C4-C4-A3-G3 for '침울해서(frustrated)'. When the emotion words were used at the end of a sentence, the pitch pattern was transformed to G4-G4-F4-F4 for '즐거워요(joyful)', D4-D4-A3-G3 for '행복해요(happy)', G3-G3-G3-A3 and F3-G3-E3-D3 for '억울해요(resentful)', A3-G3-F3-F3 for '불안해요(anxious)', and A3-A3-F3-F3 for '침울해요(frustrated)'. These results indicate the differences in pitch patterns depending on the conveyed emotions and the position of words in a sentence. This study presents the baseline data on the tonal characteristics of emotion words, thereby suggesting how pitch patterns could be utilized when creating a melody during songwriting for emotional expression.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.2 s.40
• /
• pp.108-115
• /
• 2005

Gyeonggi metamorphic complex in the Gwangju area include banded biotite gneiss and quartzofeldspathic gneiss. Detailed structural analysis suggests that structural elements in the study area were formed by at least five phase of deformations. Penetrative compositional foliations(S1) formed in the banded gneiss during the first metamorphism and deformation (D1). After intrusion of plutonic rocks, the second deformation (D2) produced S2 foliations in the banded gneiss and quartzofeldspathic gneiss during the second metamorphism. D3 structures are represented by isoclinal folds (F3) whose axial surfaces are parallel to S3 foliations. The N-S oriented shortening (D4) was accommodated by closed upright F4 fold with about 100m of axial surface separation. F4 fold is refolded by regional F5 folding resulting in different orientation and fold style of F4 fold according to the position of F5 fold. The F4 fold with tight interlimb angle is subparallel to the axial surface (north-south) of F5 fold in the core of the F5 fold. In contrast the F4 fold trends northeast in the western limb and northwest in the eastern limb of F5 fold. The interlimb angle is larger in the limbs than that in the core of F5 fold. The trace of foliations is constrained by mainly F4 and F5 folds. Joint fanning around fold is developed in the limbs of F5 fold and bc joints are dominant in the hinge area of F5 fold. A strike-slip fault had developed in tile central part of the study area after F5 folding. The orientation of joint and foliation is rotated anticlockwise about $15^{\circ}$ by the landslide occurred during the Quaternary.

• The Korean Journal of Mycology
• /
• v.12 no.1
• /
• pp.27-33
• /
• 1984

Alternaria tenuis, Arthrobotrytis sp., Aspergillus spp., Cephalosporium sp., Cladosporium sp., Cylindrocarpon sp., Fusarium equiseti, F. moniliforme, F. semitectum, F. solani, Penicillium spp., Rhizopus sp. were saprophytic fungi and Cercospora kikuchii, Colletotrichum truncatum, Diaporthe phaseolorum var. sojae and Fusarium oxysporum were pathogenic fungi detected from 14 seed samples of soybean. Initial symptoms caused by C. kikuchii, C. truncatum, D. phaseolorum sojae and F. oxysporum on seedlings from naturally infected seed by the test tube agar method have been described and discussed. Soybean seeds infected with C. truncatum, D. phaseolorum sojae and F. oxysporum reduced germination of seeds and have influenced on the growth of soybean seedling caused by C. kikuchii. Surface-sterilized soybean seedlings became diseased in the test tube agar artificially inoculated with C. kikuchii, C. truncatum and D. phaseolorum sojae isolated from naturally infected soybean seeds. F. oxysporum showed very weak pathogenicity. Seed disinfectants of Benlate-T, Homai, Tecto and Sisthane have effective to C. kikuchii, C. truncatum, D. phaseolorum sojae and F. oxysporum. Arasan, Captan, Busan-30 and Mercron were inferior to C. kikuchii but effective against others. Seed disinfectants treated in this experiment have increased seed germination campared with non-treatment.