• Asian Journal of Turfgrass Science
• /
• v.9 no.2
• /
• pp.119-129
• /
• 1995

Decomposition rates of glucose, starch, spinach leaves and litters in forests are calculated by equation dC dt=-kC(Co-1nC), dC- dt=$-kC^2$, and Olson's negative exponential decay model.dC dt = - kC =-kC(Co - InC) showed a very close fit to decomposition of the organic matters in cultural media by purified microorganisms and dC dt=$-kC^2$ to decomposition of the litters in forests. Key words: Organic matters, Cultural media, Glucose, Starch, Leaves, Litters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1049-1054
• /
• 2013

In this paper, two-dimensional(2-D) Finite Difference Time Domain(FDTD) method using the domain decomposition method is proposed. We calculated the electromagnetic scattering field of a two dimensional rectangular Perfect Electric Conductor(PEC) structure using the 2-D FDTD method with Schur complement method as a domain decomposition method. Four domain decomposition and eight domain decomposition are applied for the analysis of the proposed structure. To validate the simulation results, the general 2-D FDTD algorithm for the total domain are applied to the same structure and the results show good agreement with the 2-D FDTD using the domain decomposition method.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.147-152
• /
• 1998

2-D flow fields are studied by using a shared memory parallel computer with a parallel flow analysis program which uses domain decomposition method and MPI library for data exchange at overlapped interface. Especially, effects of directional domain decomposition on parallel efficiency are studied for 2-D Lid-Driven cavity flow and flow through square cavity. It is known from the present study that domain decomposition along the main flow direction gives better parallel efficiency in 1-D partitioning than along the other direction. 2-D partitioning, however, is less sensitive to flow directions and gives good parallel efficiency for most of the cases considered.

• Journal of Ecology and Environment
• /
• v.38 no.4
• /
• pp.517-528
• /
• 2015

Litter decomposition is an important process in terrestrial ecosystem. However, studies on decomposition are rare, especially in evergreen broadleaf trees. We collected the leaf litter of five evergreen broadleaf trees (Daphniphyllum macropodum, Dendropanax morbifera, Castanopsis cuspidata var. thunbergii, Machilus thunbergii and Quercus acuta), and carried out a decomposition experiment using the litterbag method in Ju-do, Wando-gun, Korea for 731 days from December 25, 2011 to December 25, 2013. Among the five experimental tree species, C. cuspidata var. thunbergii distribution was limited in Jeju Island, and D. macropodum was distributed at the highest latitude at Mt. Baekyang (N 35°40′). About 2% of the initial litter mass of D. macropodum and D. morbifera remained, while 20.9% remained for C. cuspidata var. thunbergii, 30.4% for M. thunbergii, and 31.6% for Q. acuta. D. macropodum litter decayed four times faster (k = 2.02 yr^-1) than the litter of Q. acuta (k = 0.58 yr^-1). The decomposition of litter was positively influenced by thermal climate such as accumulated mean daily air temperature (year day index) and precipitation, as well as by physical characteristics such as thickness (R²=0.939, P = 0.007) and specific leaf area (SLA) (R² = 0.964, P = 0.003). The characteristics of chemical composition such as lignin (R² = 0.939, P = 0.007) and water-soluble materials (R² = 0.898, P = 0.014) showed significant correlations with litter decomposition. However, the nutrients in litter showed complicated species-specific trends. The litter of D. macropodum and D. morbifera had fast decomposition despite their low nitrogen concentration and high C/N ratio. This means that the litter decomposition was more strongly affected by physical characteristics than chemical composition and nutrient content. On the other hand, the litter of Q. acuta which had the slowest decay rate had a high amount of N and low C/N ratio. Thus, the decomposition of Q. acuta litter was more affected by the P content of the litter than the N content, although all litter had similar physical characteristics.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.6
• /
• pp.537-544
• /
• 2009

This paper concerns analysis technique on determining of attitude control gain in the low frequency region using stability area. The stability area is defined by the D-Decomposition method, which was designed by Neimark. In this paper, it is introduced D-Decomposition method from reference paper and design attitude control gain of generic launch vehicle during first stage flight phase. For selecting PD control gain, it is considered the system parameter uncertainty about whole first-stage flight phase, represented the stability area boundary on each case. After deciding the PD control gain using stability area method, it is applied to launch vehicle linear model, and checking the stability margin requirement, frequency response characteristics.

• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.1971-1976
• /
• 2014

In this study, the photocatalytic decomposition characteristics of single toluene, toluene mixed with benzene, toluene mixed with acetone, and toluene mixed methyl mercaptan (MM) by UV reactor installed with $TiO_2$-coated perforated plate were studied. The photocatalytic decomposition rate of single toluene, toluene mixed with benzene, toluene mixed with acetone, and toluene mixed with MM fitted well on Langmuir-Hinshelwood (L-H) kinetics equation. The maximum elimination capacity was obtained to be $628g/m^3{\cdot}d$ for single toluene, $499g/m^3{\cdot}d$ for toluene mixed with benzene, $318g/m^3{\cdot}d$ for toluene mixed with acetone, and $513g/m^3{\cdot}d$ for toluene mixed with MM, respectively. The negative effect in photocatalytic decomposition of toluene are found to be in the order of acetone>benzene>MM.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.139-145
• /
• 2014

In this paper, a feature parameter is obtained by applying the Teager energy to the WPD(Wavelet Packet Decomposition) coefficients. The threshold value is obtained based on means and standard deviations of nonspeech frames. Experimental results by using TIMIT speech and NOISEX-92 noise databases show that the proposed algorithm is superior to the typical VAD algorithm. The ROC(Receiver Operating Characteristics) curves are used to compare performance of VAD's for SNR values of ranging from 10 to -10 dB.

• Journal of the Korean Mathematical Society
• /
• v.33 no.3
• /
• pp.641-650
• /
• 1996

Let G denote an upper semicontinuous(usc) decomposition of an (n + k)-manifold M into closed, connected n-manifolds. What can be said about the decomposition space B = M/G\ulcorner What regularity properties are possessed by the decomposition map $p : M \to B \ulcorner$ Certain forms of these questions have been addressed by D. Coram and pp. Duvall [C-D].

• Applied Chemistry for Engineering
• /
• v.28 no.2
• /
• pp.214-220
• /
• 2017

The spherical Al/RDX/AP composites with an average size of $550{\mu}m$ were successfully prepared by drowning-out/agglomeration (D/A) process. The surface morphology and dispersion of Al particles of those composites were investigated using SEM and EDS (energy dispersive spectrometry). As a result of thermal analysis, the onset temperature of thermal decomposition of the Al/RDX/AP composites by the D/A process was found to decrease about $50^{\circ}C$ and their thermal stability was shown to be relatively enhanced due to the increase of activation energy compared to those of using the physical mixing method. In the first decomposition region of AP, Prout-Tompkins model was shown to describe well the thermal decomposition of both composites by the physical mixing and D/A process. On the other hand, in the second decomposition region of AP, the decomposition mechanisms of composites by the physical mixing and D/A process were explained by the zero-order and contracting volume model, respectively.

• The Journal of Natural Sciences
• /
• v.7
• /
• pp.27-35
• /
• 1995

This paper introduces a VLSI (Very Large Scale Integrated Circuit) implementation of the 2-D Discrete Cosine Transform (DCT) with an application to image and video coding. This implementation, which is based upon a state space model, uses both algorithm and data partitioning to achieve high efficiency. With this implementation, the amount of data transfers between the processing elements (PEs) are reduced and all the data transfers are limitted to be local. This system accepts the input as a progressively scanned data stream which reduces the hardware required for the input data control module. With proper ordering of computations, a matrix transposition between two matrix by matrix multiplications, which is required in many 2-D DCT systems based upon a row-column decomposition, can be also removed. The new implementation scheme makes it feasible to implement a single 2-D DCT VLSI chip which can be easily expanded for a larger 2-D DCT by cascading these chips.