• Journal of Nutrition and Health
• /
• v.49 no.1
• /
• pp.28-35
• /
• 2016

Purpose: Vitamin D status is associated with several chronic diseases related to obesity. In this study, we evaluate the nutritional status of vitamin D and its relation to obesity indices in Korean women. Methods: A total of 156 healthy women participated. Vitamin D status (serum $25-OH-vitamin\;D_3$ level) and obesity indices (body mass index, body fat mass, waisthip ratio, and body fat percentage etc.) and serum lipid profiles and serum adipokine (leptin and adiponectin) levels were analyzed. Results: The $25(OH)D_3$ level showed an extremely skewed distribution from 4.1 ng/ml to 24.4 ng/ml and mean $25(OH)D_3$ level was $9.0{\pm}4.0ng/ml$. With cut-off level for vitamin D deficiency (< 12.0 ng/ml), insufficiency (12-19.9 ng/ml) and sufficiency (${\geq}20ng/ml$), 77.6%, 19.2%, and 3.2% of subjects showed vitamin D deficiency, insufficiency, and sufficiency status, respectively. The $25(OH)D_3$ level showed positive correlation with weight (r = 0.2461, p < 0.01), body mass index (r = 0.2913, p < 0.001), body fat contents (r = 0.1691, p < 0.05), fat free mass (r = 0.2330, p < 0.01), and waist hip ratio (r = 0.1749, p < 0.05) after adjusted by age. The $25(OH)D_3$ level showed no significant correlation with serum lipid profiles and adipokine levels. Conclusion: Most subjects (76.6%) in this study, who had a vitamin D deficient status and serum $25(OH)D_3$ level, showed positive correlation with several obesity indices, however further research based on a large Korean population is needed to confirm the relationship.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.2
• /
• pp.45-50
• /
• 2004

The field utilization factor (equation omitted) (the mean electric field / the maximum electric field) of standard sphere gaps was calculated by the charge simulation method, taking into account the ground plane and shanks. n changes mainly with g/r and slightly with 1$_1$, 1$_2$ and 1, where D=2r is the sphere diameter, g is the gap length, 1$_1$ and 1$_2$, respectively, are the lengths of the upper and lower shank, and t is the shank diameter. Generally, (equation omitted) increases as 1$_1$,1$_2$ and t each becomes larger. IEC standard 60052(2002) limits t$\leq$0.2D 1$_1$$\geq$1D and prescribes A=1$_2$＋D＋g where A is the height of the spark point on the upper sphere. Therefore, (equation omitted) is the largest when A=9D and the smallest when A=3D. The simple equation of a straight line, (equation omitted)=1- (g/3r), can generally be used as a representative value of (equation omitted) for a wide variety of sphere diameters that are permitted by the IEC standard. The maximum electric field E$_{m}$ at sparkover of standard air gaps has also been calculated by the relation E$_{m}$=V/(equation omitted)g). E$_{m}$ describes a U-curve for g/r, up to the sphere diameter of 1 m. Moreover, for 1.5-m and 2-m diameters and especially .for negative polarity, sparkover voltages have been calculated by integration of the ionization index.index.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1250-1256
• /
• 2004

The movement of continuously changing positions should be stored and indexed for querying current and past positions. A simple extension of the original R-tree to add time as another dimension, called 3D R-tree, does not handle current position queries and does not address the problem of low space utilization due to high overlap of index nodes. In this paper, 1 propose the dynamic splitting policy for improving the 3D R-tree in order to improve space utilization of split nodes. 1 also extend the original 3D R-tree by introducing a new tagged index structure for being able to query the current and past positions of moving objects. 1 found out that my extension of the original R-tree, called the tagged dynamic 3DR-tree, outperforms both the 3D R-tree and 75-tree when querying current and past position.

• Journal of the Korean Mathematical Society
• /
• v.38 no.1
• /
• pp.101-123
• /
• 2001

For a linear operator Q from R(sup)d into R(sup)d and 0$\alpha$ and parameter b on the other. characterization of strictly (Q,b)-semi-stable distributions among (Q,b)-semi-stable distributions is made. Existence of (Q,b)-semi-stable distributions which are not translation of strictly (Q,b)-semi-stable distribution is discussed.

• Journal of Environmental Health Sciences
• /
• v.44 no.5
• /
• pp.421-432
• /
• 2018

Objectives: In this study, we started to develop an indoor garden integrated IoT solution based on IAQ (indoor air quality) and interconnection with an environmental database for smart management of indoor gardens. The purpose of this study was to develop and apply an integrated solution for customized air purification from an indoor garden through big data analysis using IoT technology. Methods: An IoT-based IAQ monitoring system was established in three households within a new apartment building. Based on real-time and long-term data collected, $PM_{2.5}$, $CO_2$, temperature, and humidity changes were compared to those of indoor garden applications and the analyzed results were indexed. Results As a result of the installation, all three households had no results exceeding the standard for indoor air pollution on average $PM_{2.5}$ and $CO_2$ indices. In the case of indoor garden installation, the IAQ index increased to the "Good" section after the installation, and readings in the "Bad" section shown before the installation disappeared. The comfort index also did not dip into the "Uncomfortable" section, where it had been preinstallation, and significantly lowered the average score from "Uncomfortable for sensitive groups" to "Good". Overall, the IAQ composite index for the generation of installations decreased the "Good" interval, but "Bad" did not appear. Conclusions In this study on developing an integrated solution for IAQ based on IoT indoor gardens, big data was analyzed to determine IAQ and comfort indexes and an IAQ composite index. Through this process, it became understood that it is necessary to monitor IAQ based on IoT.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.675-682
• /
• 2020

Multi-wire sawing is the prominent technology employed to cut hard material ingots into wafers. This paper aimed to research the effect of diamond toughness index on the cutting performance of electroplated diamond wire. Three different toughness index of diamond abrasives were used to manufacture electroplated diamond wires. The cutting performance of electroplated diamond wire is verified through experiments, in which sapphire ingot are cut using single wire sawing machine. A single wire saw for constant load slicing is developed for the cutting performance evaluation of electroplated diamond wire. Choosing the cutting depth, total cutting depth, cutting force and wear of electroplated diamond wires as evaluation parameters, the performance of electroplated diamond wire is evaluated. The results of this study showed that there was a significant direct relationship between the toughness index of diamond abrasives and the cutting performance. Results demonstrated that diamond abrasive with a high toughness index showed higher cutting performance. However, all diamond abrasives showed similar cutting performance under low load conditions. The results of this paper are useful for the development of cutting large diameter ingots and cutting high hardness ingots at high speed.

• Journal of Technology Innovation
• /
• v.10 no.1
• /
• pp.98-123
• /
• 2002

This study develops a Korean R&D Scoreboard which has originated from the R&D Scoreboard in United Kingdom. The Scoreboard contains details of the R&D investment, sales, growth, profits and employee numbers for Korean companies which are extracted from company annual reports and key ratios calculated, with some movements over time. Companies are classified by the Korea Standard Industrial Classification. The Scoreboard contains 190 companies which consist of 100 largest companies and 30 middle-or small-sized firms listed in Korea Stock Exchange (KSE), and 30 ventures and 30 other firms listed in KOSDAQ. The overall company R&D intensity (R&D as a percentage of sales) is 2.1% compared to the international average of 4.2%. Korea has an unusually large R&D percentage of sales in IT hardware (4.9%) and telecommunication (3.7%). R&D intensity is positively correlated with company performance measures such as profitability, sales growth, productivity and market value. For largest companies listed in KSE and ventures listed in KOSDAQ, the ratio of operating profit to sales is greater for high R&D intensity companies. Sales growth is in proportion to R&D intensity for all companies. Plots of value added per employee or sales per employee vs R&D per employee rise together for the sectors studied, especially for the chemical sectors and automobile sectors, demonstrating a correlation with productivity. The average market value of high R&D companies in the KSE has risen more than 1.6 times that of the KOSPI 200 index. Given the correlation between R&D intensity and company performance and given that R&D is a smaller percentage of surplus (profits plus R&D) than international level (both overall and in several sectors), the challenges facing Korean companies are to maintain the leading position in IT hardware and telecommunication, and to increase the intensity of R&D in many medium-intensive R&D sectors where Korea has an average intensity well below international or US levels.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.1
• /
• pp.47-61
• /
• 2013

This study compares the Residual ultimate longitudinal strength - grounding Damage index (R-D) diagrams produced by two analysis methods: the ALPS/HULL Intelligent Supersize Finite Element Method (ISFEM) and the design formula (modified Paik and Mansour) method - used to assess the safety of damaged ships. The comparison includes four types of double-hull oil tankers: Panamax, Aframax, Suezmax and VLCC. The R-D diagrams were calculated for a series of 50 grounding scenarios. The diagrams were efficiently sampled using the Latin Hypercube Sampling (LHS) technique and comprehensively analysed based on ship size. Finally, the two methods were compared by statistically analysing the differences between their grounding damage indices and ultimate longitudinal strength predictions. The findings provide a useful example of how to apply the ultimate longitudinal strength analysis method to grounded ships.

• The Journal of Engineering Geology
• /
• v.3 no.1
• /
• pp.21-37
• /
• 1993

In order to investigate the correlation of sedimentary rock properties. specific gravity, porosity, water content, sonic wave velodty, and point4oad strength index of core samples of limestones, sandstones and shales were measured. The relationships between density and velocity show $V_p=16300d-38719.3,{\;}V_s1896.4d-29225.1$ of regression equation for sandstones and $Vp=4085d-10264.8,{\;}V_s=3519d-7841.3$ for shales and <$Vp=4085d^2-20747d+303,{\;}V_s=3899d^2-21442d+318$ for limestones. Seismic wave velocity of shales which have high density is lower than that of sandstones, and this seems to be an effect of bedding in shale. P-wave velocity and S-wave velocity of limestones, sandstones and shales show the linear relationships as a whole. The regression equations are respectively calculated V_s=0.26V_p+1041.6m/sec,{\;}V_s=0.43V_p+424.2m/sec,{\;}and{\;}Vs=0.51V_p+261.9m/sec$ and the correlation coefficients of the velocity show r= 0.86 in sandstones, r= 0.75 in limestones and r=0.86 in shales. According to the point4oad strength test for limestones, point4ord strength anisotropy was not so dear even though the specimens show generally the banded structure. Variations of dip angle of bedding whihin the range $30^{\circ}-60^{\circ}$ does not have much influence upon the diametral strength index and axial strength index. From the result of point load test, P-wave velocity increases with point4ord strength index but the regression equations are $V_p=98.5lI{s_d}+4082.1m/sec,{\;}V_p=106.41{s_a}+3954m/sec$ and their correlation coefficient is low.

• The KIPS Transactions:PartD
• /
• v.12D no.4 s.100
• /
• pp.507-520
• /
• 2005

The R-trees are usually used for an index of trajectories in moving-objects databases. However, they need to access a number of nodes to trace same trajectories because of considering only a spatial proximity. Overlaps and dead spaces should be minimized to enhance the performance of range queries in moving-objects indexes. Trajectories of moving-objects should be preserved to enhance the performance of the trajectory queries. In this paper, we propose the TP3DR-tree(Trajectory Preserved 3DR-tree) using clusters of trajectories for range and trajectory queries. The TP3DR-tree uses two split policies: one is a spatial splitting that splits the same trajectory by clustering and the other is a time splitting that increases space utilization. In addition, we use connecting information in non-leaf nodes to enhance the performance of combined-queries. Our experiments show that the new index outperforms the others in processing queries on various datasets.