• Title/Summary/Keyword: D$_1$-distance

Search Result 1,802, Processing Time 0.033 seconds

UNDERWATER DISTRIBUTION OF VESSEL NOISE (선박소음의 수중분포에 관한 연구)

  • PARK Jung Hee
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.10 no.4
    • /
    • pp.227-235
    • /
    • 1977
  • The noise pressure scattered underwater on account of the engine revolution of a pole and liner, Kwan-Ak-San(G. T. 234.96), was measured at the locations of Lat. $34^{\circ}47'N$, Long. $128^{\circ}53'E$ on the 16th of August 1976 and Lat. $34^{\circ}27'N$, Long. $128^{\circ}23'E$ on the 28th of July, 1977. The noise pressure passed through each observation point (Nos. 1 to 5), which was established at every 10m distance at circumference of outside hull was recorded when the vessel was cruising and drifted. In case of drifting, the revolution of engine was fixed at 600 r. p. m. and the noise was recorded at every 10 m distance apart from observation point No. 3 in both horizontal and vertical directions with $90^{\circ}$ toward the stern-bow line. In case of cruising, the engine was kept in a full speed at 700 r.p.m. and the sounds passed through underwater in 1 m depth were also recorded while the vessel moved back and forth. The noise pressure was analyzed with sound level meter (Bruel & Kjar 2205, measuring range 37-140 dB) at the anechoic chamber in the Institute of Marine Science, National Fisheries University of Busan. The frequency and sound waves of the noise were analyzed in the Laboratory of Navigation Instrument. From the results, the noise pressure was closely related to the engine revolution shelving that the noise pressure marked 100 dB when .400 r. p. m. and increase of 100 r. p. m. resulted in 1 dB increase in noise pressure and the maximum appeared at 600 r. p. m. (Fig.5). When the engine revolution was fixed at 700 r. p. m., the noise pressures passed through each observation point (Nos. 1 to 5) placed at circumference of out side hull were 75,78,76,74 and 68 dB, the highest at No.2, in case of keeping under way while 75,76,77,70 and 67 dB, the highest at No.3 in case of drifting respectively (Fig.5). When the vessel plyed 1,400 m distance at 700 r.p.m., the noise pressure were 67 dB at the point 0 m, 64 dB at 600m and 56 dB at 1,400m on forward while 72 at 0 m, 66 at 600 m and 57 dB at 1,400 m on backward respectively indicating the Doppler effects 5 dB at 0 m and 3 dB at 200 m(Fig.6). The noise pressures passed through the points apart 1,10,20,30,40 and 50 m depth underwater from the observation point No.7 (horizontal distance 20 m from the point No.3) were 68,75,62,59,55 and 51 dB respectively as the vessel was being drifted maintaining the engine revolution at 600 r. p. m. (Fig. 8-B) whereas the noise pressures at the observation points Nos.6,7,8,9 and 10 of 10 m depth underwater were 64,75,55,58,58 and 52 dB respectively(Fig.8-A).

  • PDF

A Stereo-Vision System for 3D Position Recognition of Cow Teats on Robot Milking System (로봇 착유시스템의 3차원 유두위치인식을 위한 스테레오비젼 시스템)

  • Kim, Woong;Min, Byeong-Ro;Lee, Dea-Weon
    • Journal of Biosystems Engineering
    • /
    • v.32 no.1 s.120
    • /
    • pp.44-49
    • /
    • 2007
  • A stereo vision system was developed for robot milking system (RMS) using two monochromatic cameras. An algorithm for inverse perspective transformation was developed for the 3-D information acquisition of all teats. To verify performance of the algorithm in the stereo vision system, indoor tests were carried out using a test-board and model teats. A real cow and a model cow were used to measure distance errors. The maximum distance errors of test-board, model teats and real teats were 0.5 mm, 4.9 mm and 6 mm, respectively. The average distance errors of model teats and real teats were 2.9 mm and 4.43 mm, respectively. Therefore, it was concluded that this algorithm was sufficient for the RMS to be applied.

Analysis of Direction Finding, Interference Cancellation, and Beamforming Performance by Array Antenna Pattern Measurement Distance (배열안테나 패턴 측정 거리에 따른 방향탐지, 간섭제거, 빔형성 성능 분석)

  • Ko, Yo-han;Kang, Haeng-ik;Lee, Chul-soo;Kim, Do-kyung;Kim, Kap-jin;Park, Young-bum
    • Journal of Advanced Navigation Technology
    • /
    • v.21 no.6
    • /
    • pp.593-600
    • /
    • 2017
  • This paper analyzes the performances of direction finding, interference cancellation, and beamforming performance by array antenna pattern measurement distance between the center of array antenna and reference emitter. Array antenna is widely adopted for example as wireless communications, radar, and sonar. In order to use array antenna, array antenna pattern must be known and it can be measured in anechoic chamber. However, the size of anechoic chamber is generally limited. So measurement error of array antenna can be occurred and this could effect performance decrease of direction finding, interference cancellation, and beamforming. It is verified by computer simulation that the performances of direction finding, interference cancellation, and beamforming by array antenna pattern measurement distance.

Power optimization of optical 40 wavelength division multiplexing channels at 3000 km transmission for link span variation (40 채널 파장 다중화 광신호 3000 km 전송에서 링크 구간 거리에 따른 광신호 세기 최적화)

  • Choi, Bo-Hun
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.1
    • /
    • pp.197-203
    • /
    • 2013
  • Optical power optimization of 10 Gbps 40 wavelength division multiplexing channels was analyzed at the 3000 km long-haul transmission distance when the link span distance was changed between 40 km and 140 km. The signal performance of the transmission was obtained as a Q value and it was compared when input power into SSMF and input power into DCF on the transmission link were changed. The optimized input power into SSMF increased linearly to link span distance with 1 dB/km. The optimized power into DCF increased linearly with 0.5 dB/km up to 100 km link span, but it had no variation at longer link span than 100 km.

The Duration and H/V ratio of the Ground Motion in Southern Korea (남한 지진의 지속시간과 H/V 비율)

  • 최호선;박창업;조남대
    • Proceedings of the Earthquake Engineering Society of Korea Conference
    • /
    • 2002.03a
    • /
    • pp.42-50
    • /
    • 2002
  • The duration and H/V ratio(the amplitude ratio of the horizontal to vertical components) of ground motions caused by earthquakes in southern Korea are analyzed. Total 329 seismograms of horizontal component recorded at hypocentral distances of 10 to 350 km from 27 earthquakes with local magnitude 2 to 4 are used for the analysis. Simplified relation between the duration of ground motion( $T_{d}$) and the ratio($\chi$) of Arias intensity( $I_{A}$) and squared maximum acceleration($\alpha$$_{max}$$^{2}$) is determined to be $T_{d}$ = 3.423$\chi$$^2$+ 8.200$\chi$ + 0.029, which is useful for the estimation of the duration in southern Korea. There are three distinct distance ranges with different linear variations of the duration in hypocentral distance. They are distance intervals of 10~80km, 80~140km, and the distance greater than 140km. The duration in southern Korea shows clear proportionality to the local magnitude at magnitudes greater than 3.1. The value 1.37 of the H/V ratio obtained in southern Korea is similar to the value 1.4 of ENA(Eastern North America). The H/V ratio in southern Korea increases in the frequency range from 0.3 to 10Hz. The duration and H/V ratio of ground motions derived in this study could be used in the stochastic simulation of strong ground motion.ion.n.n.

  • PDF

STUDY ON STATISTICAL ESTIMATION OF IRRADIANT CONTRAST (통계적 방법을 이용한 적외선 신호 대비값 계산 방법 연구)

  • Han, K.I.;Choi, J.H.;Ha, N.K.;Jang, H.S.;Lee, S.H.;Kim, D.G.;Kim, T.K.
    • Journal of computational fluids engineering
    • /
    • v.22 no.1
    • /
    • pp.37-42
    • /
    • 2017
  • Infrared signals are frequently used to detect objects exposed to wide variety of environmental conditions. Detection by infrared signature is accomplished by distinguishing objects by using the IR radiant contrast between objects and the background. There are several methods of estimating the IR radiant contrast. The inverse distance weighting method, which is one of the IR radiant contrast estimation method using the effect of distance from objects, is known to be an effective way to analyze radiant contrast for complex backgrounds. However this method has a disadvantage of requiring a long calculation time. In this study we propose a statistical method of estimating the IR radiant contrast by using randomly selected pixels of arbitrary number among background pixels to reduce calculation time. Some measured IR images in MWIR and LWIR regions are used to test the applicability of the method proposed and we found that the proposed method is very effective in determining the IR radiant contrast showing very rapid estimation with minar accuracy loss.

The Kinematic Analysis and Comparison of Foreign and Domestic 100m Elite Woman's Hurdling Techniques (국내외 우수 여자선수 100m 허들동작의 운동학적 비교 분석)

  • Ryu, Jae-Kyun;Yeo, Hong-Chul;Chang, Jae-Kwan
    • Korean Journal of Applied Biomechanics
    • /
    • v.17 no.4
    • /
    • pp.157-167
    • /
    • 2007
  • The purpose of this study was to analyze kinematic techniques in the woman's 100m hurdle. In order to find the kinematic parameters, a 3-D video system for kinematic analysis-kwon3d 3.1(Kwon3D Motion Analysis Program Version 3.1)-was used. Eight JVC video cameras(GR-HD1KR) were used to film the performance of Lee Yeon-Kyoung at a frame rate of 60fields/s. The kinematic characteristics from the first hurdle to last hurdle were analyzed at the clearing hurdle spots such as distance, velocities, heights and angles. The real-life three-dimensional coordinates of 20 body landmarks during each phases were collected using a Direct Linear Transformation procedure. After analyzing the kinematic variables in the 100m hurdle run, the following conclusion were obtained; Lee Yeon-Kyoung had to maintain constant stride lengths between hurdles and increase takeoff distance before clearance and shorter landing distance after clearance. She also had to hit the correct takeoff point in front of the hurdle and extend the lead leg at the moment of landing in order to minimize the loss of velocity. She had to sprint between hurdles as fast as possible over 8m/s and run powerful first stride and shortened third stride preparing for the following hurdle clearances.

Drift and Volatilization of Some Pesticides Sprayed on Chinese Cabbages (배추에 살포된 몇 가지 농약제제에 따른 성분의 휘산과 비산)

  • Lee, Ja-Young;Han, Il-Keun;Lee, Sang-Yun;Yeo, Ik-Hyun;Lee, Su-Rae
    • Korean Journal of Environmental Agriculture
    • /
    • v.16 no.4
    • /
    • pp.373-381
    • /
    • 1997
  • In order to investigate the drift of pesticides sprayed on Chinese cabbage, 7 pesticides chlorpyrifos, EPN, pirimiphos-methyl, phenthoate, tetradifon, dicofol and bifenthrin were applied in two sets of field tests. The pesticide residues were quantified bar multiple-residue analysis, in which the recovery rate was 78${\sim}$92% and standard deviation was ${\pm}0.683{\sim}52%$. It was found that most of the tested pesticides were spread by drift to neighbouring area and brought about the contamination of the unsprayed crops. The extent of drift varied depending upon the pesticide, distance and wind direction. The mean residue levels on unsprayed crops were 0.66% at 3 meter distance, 0.10% at 6 m distance and 0.05% at 9 m distance from the applied area and the maximum level was 1.83% of the residue on sprayed crops.

  • PDF

Flow and Temperature Characteristics in a Circular Impinging Jet (원형 충돌 제트에서의 유동 및 온도 특성)

  • Kim Jungwoo;Choi Haecheon
    • Proceedings of the KSME Conference
    • /
    • 2002.08a
    • /
    • pp.237-240
    • /
    • 2002
  • In the present study, we perform LES of turbulent flow and temperature fields in a circular impinging jet at Re=5000 for two cases of H/D=2 and 6 (H denotes the distance between the jet exit and flat plate, and D does the diameter of the jet exit). In the case of H/D=2, the regular vortical structures observed in free jet do not exist because of the smaller distance than the potential core. The Nusselt number on the wall is largest at $r/D{\cong}10.67$ where vortex rings Impinge. At $r/D{\cong}1.5{\~}2.0$, the vortex rings induce the secondary vortices, resulting in a secondary peak in the Nusselt number there. In the case of H/D=6, the vortex rings change into three-dimensional vortical structures and the small-scale vortices impinge on the flat plate. The increase of turbulent intensity due to small-scale vortices results in the largest Nusselt number at the stagnation point.

  • PDF

Strength Performance Evaluation of Threaded Nail Joints of Wooden Retaining Wall Using Pitch Pine (Pinus rigida Miller) Square Timber (리기다 소나무 정각재를 사용한 목재옹벽의 직결나사못 접합부 내력 성능 평가)

  • Song, Yo-Jin;Kim, Keon-Ho;Lee, Dong-Heub;Hwang, Won-Joung;Hong, Soon-Il
    • Journal of the Korean Wood Science and Technology
    • /
    • v.39 no.1
    • /
    • pp.53-59
    • /
    • 2011
  • A connection was made between a single stretcher and 2 headers with 2 threaded nails (Type-A), and another one between 2 stretchers and 2 headers with 4 threaded nails (Type-B) to use as specimens. Type-C was the stretchers that are connected with 2 threaded nails by half lap joint at end-distance 5D to reinforce Type-B, Type-C1 the stretchers that are connected by half lap joint at end-distance 10D, and Type-C2 with 3 threaded nails at end-distance 10D. Compressive shear strength of Type-C, the supplementation of Type-B, was decreased by 30%, compared with that of Type-B. Those of Type-B and Type-C1 that used longer end-distance than Type-C were about the same, and that of Type-C2 connected with 3 threaded nails was 1.28-times stronger than that of Type-C1. Connection of the retaining wall using existing square timber has a problem between long and short stretchers and 2 headers. So it was investigated in the experiment to replace it. Therefore, if Type-B is replaced with Type-C2 in constructing the retaining wall, the crack and the rupture of timber caused by threaded nail as well as construction period can be reduced, and also it can be expected to increase their own strength.