• Journal of Advanced Marine Engineering and Technology
• /
• 제14권4호
• /
• pp.46-56
• /
• 1990

Stress analysis of axi-symetric body with non-symetric loading and non-symetric given displacements is investigated in this paper using the finite element method. As the non-symetric load and non-symetric given displacements of axi-symetric body are generally periodic functions of angle .theta., the nodal forces and nodal displacements can be expanded in cosine and sine series, that is, Fourier series. Furthermore, using Euler's formula, the cosine and sine series can be converted into exponential series and it is prooved that the related calculus become more clear. Substituting the nodal displacements expanded in Fourier series into the strain components of cylindrical coordinates system, the element strains are expressed in series form and by the principal of virtual work, the element stiffness martix and element load vector are obtained for each order. It is also showed that if the non-symetric loads are even or odd functions of angle ${\theta}$ the stiffness matrix and load vector of the system are composed with only real numbers and relatively small capacity fo computer memory is enough for calculation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.404-413
• /
• 2013

In the present study, a towed underwater particle image velocimetry (PIV) system was validated in uniform flow and used to investigate the free-surface effects on the turbulent wake of a simple surface-piercing body. The selected test model was a cylindrical geometry formed by extruding the Wigley hull's waterplane shape in the vertical direction. Due to the constraints of the two-dimensional (2D) PIV system used for the present study, the velocity field measurements were done separately for the vertical and horizontal planes. Using the measured data at several different locations, it was possible to identify the free-surface effects on the turbulent wake in terms of the mean velocity components and turbulence quantities. In order to provide an accuracy level of the data, uncertainty assessment was done following the International Towing Tank Conference standard procedure.

• Advances in pediatric surgery
• /
• 제13권2호
• /
• pp.112-118
• /
• 2007

Ingested foreign bodies are common occurrences in the pediatric population. From October 2002 to April 2006, eight patients (6 male, mean age: $30.9{\pm}14.4$ months, range: 7~45 months) who had ingested metallic foreign bodies, such as bar magnets, coin-type magnets, screws, metal beads, and disk batteries, were selected for foreign body removal using a magnetic device under floroscopic control. A 1-cm-long cylindrical magnet (6 mm in diameter) was placed at the end of a 150-cm-long plastic tube from an IV set. The magnet was passed through the mouth into the stomach. Under fluoroscopic control, the magnet was maneuvered so that it attached to the metallic foreign bodies. The forgeign body was then easily removed by retracting the magnet with the metallic object attached. This procedure was successful in six patients of 8 patients. This procedure is a minimally-invasive and may avoid the use of anesthesics, endoscopy or surgery.

• Structural Engineering and Mechanics
• /
• 제83권1호
• /
• pp.67-77
• /
• 2022

In this study, frictionless continuous and discontinuous contact problems of a magneto-electro-elastic layer in the presence of the body force were discussed. The layer was indented by a rigid cylindrical insulating punch and supported by a rigid substrate without bond. Applying the Fourier integral transform technique, the general expressions of the problem were derived in the presence of body force. Thanks to the boundary conditions, the singular integral equations were obtained for both the continuous and the discontinuous contact cases. Gauss-Chebyshev integration formulas were used to transform the singular integral equations into a set of nonlinear equations. Contact width under the punch, initial separation distance, critical load, separation regions and contact stress under the punch and between the layer, and substrate were given as a result.

• 박물관보존과학
• /
• 제25권
• /
• pp.1-8
• /
• 2021

국립중앙박물관 소장품 청화백자투각연당초팔괘문연적(수정147)을 대상으로 CT 조사를 실시하고 복제품을 제작하여 구조와 제작방법에 대해 살펴보았다. CT 조사를 실시한 결과, 접합선이나 기공이 없는 것으로 보아 하부 동체부 틀을 사용하여 한 번에 찍어 빼낸 후 상부 틀로 찍어 뽑아낸 상부 뚜껑을 서로 접합하였음을 알게 되었다. 특히 하부 동체부의 내기 상면과 연접한 뚜껑 하단면이 서로 접합이 잘 되도록 내면 가운데를 대나무 칼로 거칠게 돌려 깎아 접합면이 누수 되지 않도록 처리하였다. 처음 제작할 당시 물을 담는 연적의 내기(內器)는 도량형 규격에 맞고 틀을 뽑아내기에도 용이한 원통형(圓筒形)으로 만들었을 것으로 짐작되나 상부면과 동체부를 붙이는 과정에서 형태가 사다리꼴로 변형되었을 것으로 여겨진다. 또한 실리콘 복제를 이용하여 원통형 내기로 다시 제작한 후 내기의 용량을 비교 측정한 결과, 3D프린팅을 이용해 복제한 유물 내기의 용량이 152.5㎖인데 반해 원통형 내기의 용량은 대략 168.6㎖로 조선시대 도량형 기준인 '량(量)'의 단위로 3홉(약 174㎖)과 유사하다는 것을 확인 할 수 있었다. 원통형 내기의 용량이 조선 후기 도량형 기준과 부합하므로 실제 도공이 팔괘문연적을 제작할 당시 원통형내기를 가진 연적으로 제작하였을 것으로 생각된다.

• 한국기계연구소 소보
• /
• 통권14호
• /
• pp.33-43
• /
• 1985

Thick cylindrical structures, such as assemblies with electrical induction heaters or nuclear fuel element, are sometimes subjected to thermal stresses from internal heating. Such stresses are produced by temperature gradients between the inside and outside surfaces. These problems possess symmetry about either a point or an axis. the objective of this paper is to present the determination of the temperature distribution and thermal stress-strain within a conducting body by finite element method.

• 한국분말재료학회지
• /
• 제17권1호
• /
• pp.29-35
• /
• 2010

We produced cylindrical porous TiNi bodies by Self-propagating High-temperature Synthesis (SHS) process, varying the heating schedule prior to ignition of a loose preform compact made from (Ti+Ni) powder mixture. To investigate the effect of the heating schedule on the behaviour of combustion wave propagation and the structure of porous TiNi shape-memory alloy (SMA) body, change of temperature in the compact during SHS process was measured as a function of time and used for determining combustion temperature and combustion wave velocity. Microstructure of produced porous TiNi SMA body was observed and the results were discussed with the combustion characteristics. From the results it was concluded that the final average pore size could be controlled either by the combustion wave velocity or by the average temperature of the preform compact prior to ignition.

• 대한토목학회논문집
• /
• 제11권1호
• /
• pp.45-53
• /
• 1991

지하구조물은 물체력과 초기응력이 지배적인 하중조건이 되며, 무한 또는 반무한영역을 경계로 한다. 또한 굴착면 주위에는 응력집중에 의해 비선형 거동이 발생한다. 본 논문에서는 경계요소법으로 물체력과 초기응력을 해석하기 위하여 영역적분은 경계 적분화하였다. 물체력에 대한 영역적분은 Galerkin텐서와 발산정리를 사용한 방법과 극좌표를 이용한 직접적분 방법으로 경계적분화하였고, 초기응력에 대한 영역적분은 극좌표를 이용한 직접적분 방법을 응용하여 경계적분화하였다. 경계요소해석 결과는 유한요소해석 결과와 비교하여 검증하였고 검증된 경계요소 프로그램을 비선형 유한요소 프로그램과 조합하여 굴착면 주위에 발생하는 비선형 거동을 합리적으로 해석하도록 하였다. 경계요소법에서 고려하기 어려운 물체력과 초기응력에 대한 영역적분을 경계적분화하여 효율적으로 해석할 수 있었으며, 조합해석 방법으로 비선형 거동을 합리적으로 해석할 수 있었다. 본 연구의 결과는 지하구조물의 해석에 유용하게 사용될 수 있을 것으로 기대된다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.367-368
• /
• 2002

The design of capsule body for self-propelled endoscope is important from the frictional resistance point of view. The capsule should be able to overcome the frictional resistance in order to move along the intestine. The motivation of this work was to gain a better understanding of the capsule body design on the frictional resistance of the capsule inside an intestine. A special experimental set-up was built to measure the frictional resistance as the capsule was being pulled inside the pig intestine specimen. Tests were performed with open and closed intestine specimens. Experimental data showed that smooth cylindrical capsule geometry resulted in the least frictional resistance. The resistance inside the closed intestine specimen was about four times higher than that of the open specimen. It is expected that the results of this work will be used to design the optimum propulsion system for the microendoscope.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1982년도 제24회 수공학 연구발표회 논문초록집
• /
• pp.105-120
• /
• 1982

The circular cylindrical piles are extensively used in near shore structures. For the purpose of analysing stability of vertical pile, we must consider the horizontal force, the lift force, and the traverse force etc. In this paper author studied horizontal force acts on the vertical circular pile and investigated the relation between the floating body coefficients C$$ and U$$T/D.