• Structural Engineering and Mechanics
• /
• 제55권2호
• /
• pp.335-348
• /
• 2015

The influence of the interface imperfect bonding on the flexural wave dispersion in the bilayered hollow circular cylinder is studied with utilizing three-dimensional linear theory of elastodynamics. The shear-spring type model is used for describing the imperfect bonding on the interface between the layers and the degree of the imperfectness is estimated through the dimensionless shear-spring parameters which enter the mentioned model. The method for finding the analytical expressions for the sought values and dispersion equation are discussed and detailed. Numerical results on the lowest first and second modes are presented and analyzed. These results are obtained for various values of the shear-spring parameters. According to these results, in particular, it is established that as a results of the imperfection of the bonding between the layers the new branches of the dispersion related the first fundamental mode arise and the character of the dispersion curve related to the second mode becomes more complicated.

• Smart Structures and Systems
• /
• 제6권8호
• /
• pp.975-989
• /
• 2010

Based on the theory of piezo-elasticity, the paper obtains the exact solutions of functionally graded piezoelectric hollow cylinders with different piezoelectric parameter $g_{31}$. Two kinds of piezoelectric hollow cylinders are considered herein. One is a multi-layered cylinder with different parameter $g_{31}$ in different layers; the other is a continuously graded cylinder with arbitrarily variable $g_{31}$. By using the Airy stress function method with plane strain assumptions, the exact solutions of the mechanic and electrical components of both cylinders are obtained when they are subjected to external voltage (actuator) and pressure (sensor), simultaneously. Furthermore, good agreement is achieved between the theoretical and numerical results, and useful conclusions are given.

• 한국정보과학회논문지:시스템및이론
• /
• 제34권10호
• /
• pp.521-528
• /
• 2007

본 논문에서는 가상원통을 이용하여 기하학적인 의복시뮬레이션에서 발생하는 의복 3차원모델의 관통을 고속으로 검사하고, 의복 3차원모델을 수정하는 새로운 방법을 제안한다. 의복을 개인 캐릭터에 기하학적으로 맞추는 경우, 의복이 인체를 국부적으로 관통하는 경우가 있다. 본 방법은 인체모델과 의복모델을 둘러싼 가상원통을 설정하고, 가상원통을 이용하여 관통지점의 후보들을 한 번에 압축하여, 후보 중에서 관통지점을 찾는 방법이다. 관통된 부분에서는 의복모델의 꼭지점을 밀어내거나 삼각형을 분할하여, 의복모델을 기하학적으로 수정한다. 이 방법은 바운딩볼륨을 이용하여 반복적으로 관통후보를 압축하는 물리적인 방법에 비해 고속처리가 가능하다.

• 한국정보과학회논문지:시스템및이론
• /
• 제30권3_4호
• /
• pp.138-148
• /
• 2003

최근에는 가상 공간을 현실감 있는 영상으로 실시간 렌더링하기 위한 방법으로 모델기반 표현방법 대신 영상 기반 표현 방법을 사용하여 탐색 영상을 생성하는 연구가 활발히 진행중이다. 본 논문에서는 영상 기반 탐색 시스템을 구현하기 위해 새로운 방법인 직각 교차 실린더 매핑과 분할기반 환경 모델 링 방법을 제안한다. 직각 교차 실린더란 두 개의 실린더를 직교하여 교차된 부분만을 표현한 물체를 말한다. 직각 교차 실린더 매핑 방법은 일반적인 환경 맵에서 발생하는 왜곡 현상을 제거하고 환경 맵에서 하나의 픽셀이 차지하는 환경 영역이 거의 일정하다는 특징을 가진다. 이러한 직각 교차 실린더 매핑 방법은 고정된 시점에서 완전 시야를 갖는 영상을 얻어 낼 수 있으나 시점이 변경된 영상을 표현하기 어렵다. 이를 위해 환경을 구성하는 물체들을 기준으로 환경 맵을 분할하고 분할된 물체의 특성에 따라 깊이 값을 설정하는 영상 분할을 통한 환경 모델 링 방법을 사용한다. 이 방법은 환경 맵에 적용하기 용이하며 다중 환경 맵을 사용 시 자세한 환경 모델 링이 가능하다.

• 대한기계학회논문집A
• /
• 제32권6호
• /
• pp.488-495
• /
• 2008

In order to achieve long fatigue lifetimes for cyclically pressurized thick cylinders, multi-layered compound cylinder has been proposed. Such compound cylinder involves a shrink-fit procedure incorporating a monobloc tube which has previously undergone autofrettage. The basic autofrettage theory assumes elastic-perfectly plastic behaviour. Because of the Bauschinger effect and strain-hardening, most materials do not display elastic-perfectly plastic properties and consequently various autofrettage mo dels are based on different simplified material strain-hardening models, which is assumed that combination of linear strain-hardenig and power strain-hardening model. This approach gives a more accurate prediction than the elastic-perfectly plastic model and is suitable for different strain-hardening materials. In this paper, a general autofrettage model that incorporates the material strain-hardening relationship and the Bauschinger effect, based upon the actual tensile-compressive stress-strain curve of a material was proposed. The model was obtained using the von Mises yield criterion and plane strain condition. The tensile-compressive stress-strain curve was obtained by experiment. The parameters needed in the model were determined by fitting the actual tensile-compressive curve of the material. Finally, strain- hardening model was compared with elastic-perfectly plastic model.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.152-159
• /
• 1997

This paper presents a vibration analysis method of crank shaft of six cylinder internal combustion engine. For simple analysis journal, pin and arm parts were assumed to have uniform section. Transfer Matrix Method was used, considering branched part and coordinate transformation part. Natural frequencies, modeshapes and transfer functions of crank shaft were investigated based upon the Euler beam theory: It was shown that the calculated natural frequencies, modeshapes agree well with the existing paper results.

• 대한조선학회지
• /
• 제23권4호
• /
• pp.11-18
• /
• 1986

The fundamental theory and application of boundary element method for two-dimensional problem are introduced in this paper. Based on this boundary element procedure, several numerical calculations such as circular cavity problem, a thin plate with hole under tension and a long thick-walled cylinder under internal pressure are performed. The numerical results show fairly good agreement with exact solutions or results of finite element method.

• Wind and Structures
• /
• 제9권1호
• /
• pp.75-93
• /
• 2006

This paper presents a quasi-steady model of vibrations of two cylinders in a side-by-side arrangement. The cylinders have flexible support and equal diameters. The model assumes that both cylinders participate in the process of vibration, each of them having two degrees of freedom. The movement of cylinders is described by a set of four non-linear differential equations. These equations are evaluated on the basis of a numerical simulation and experimental data. Moreover many features of cylinder vibrations are found from numerical results and are described in this paper.

• Structural Engineering and Mechanics
• /
• 제6권7호
• /
• pp.817-826
• /
• 1998

A finite element model based on the incremental endochronic theory for flexible pavement materials was developed in this study. Three grid systems with eight-node cubic isoparametric elements, and different loading steps were used to perform the calculations for a specimen of circular cylinder. The uniaxial stress experimental results on an asphalt mixture at $60^{\circ}C$ in SHRP conducted by University of California at Berkeley were used to check the ability of the derived numerical model. Then, the numerical results showed isotropic response and deviatoric response on the specimen in a three dimensional manner, which provided a better understanding for a deformed flexible material under the specified loading conditions.

• 소성∙가공
• /
• 제7권2호
• /
• pp.114-126
• /
• 1998

A plasticity theory applicable to the powdered metal compaction is briefly summarized and its varia-tional form for the finite element analysis is described. The compaction processes of axisymmetric solid cylinder are simulated. For the analysis of the friction effect on compaction process the investigations were performed for different compact geometries. Efforts are focused on the transmitted pressure through the compact and density distributions within the compacts. Numerical results show that :(1) the friction coefficient could be selected simply from the transmitted force data by the single acting compaction test and the simulated results ; and (2) density variations within the compacts rely on the compact geometry such as height to diameter ration and the frictional condition between compact and dies.