• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.983-989
• /
• 2012

The purpose of this paper is to decide the optimum synthesis conditions of polycrystalline diamond films according to the ratio of gas mixture. Diamond films were deposited with cyclo-hexane as a carbon precursor by the microwave plasma enhanced chemical vapor deposition process. The optimum oxygen ratio to cyclo-hexane was reached about 125 % under the fixed 0.3% c-hexane in hydrogen. Oxygen plays a role in etching the graphitic components of carbon sp2 bond effectively. By OES measurement, the best synthesis conditions found out about 12.5 % and 15.75 %, which is the emission intensity ratios of CH(B-X) and $H{\beta}$ on $H{\alpha}$, respectively. Also, the electron temperature was similar about 5,000 to 5,200 K in this work.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.277-283
• /
• 2005

LV transition curves for poly(ethylene-co-15.3 mol% octene) ($PEO_{15}$) and poly(ethylene- co-17.0 mol% octene) ($PEO_{17}$) were measured in cyclo-pentane and cyclo-hexane. Between $40{\sim}150^{\circ}C$, the LV curve for ($PEO_{15}$ + cyclo pentane) located $1.1{\sim}2.7$ bar higher than that for ($PEO_{17}$+ cyclo-pentane). In cyclo-hexane, similar behavior was observed for $PEO_{15}$ and $PEO_{17}$ solution except the pressure difference reduced to $0.9{\sim}l.6$ bar. If the backbone structure of $PEO_{15}$ were identical to that of $PEO_{17}$, the LV line for $PEO_{17}$ would locate at high pressures than that for $PEO_{15}$, since the number average molecular weight of $PEO_{17}$ (Ave. Mn=153,040) is 1.9 times higher 4han that of $PEO_{15}$ (Ave. Mn=82,200). The difference in the octene comonomer content between $PEO_{15}$ and $PEO_{17}$ is only 1.7 mole%, nevertheless this small difference in the backbone structure of the PEO greatly affected the location of the L-V curves in the mixtures comprised of PEO and cyclo-alkane.

• Applied Biological Chemistry
• /
• v.48 no.1
• /
• pp.93-97
• /
• 2005

Three antioxidants, Sa-1, Sa-2 and Sa-3, were isolated from the MeOH extract of the mushroom Sarcodon aspratus through EtOAc extraction, silica gel and Sephadex LH-20 column chromatography, and $C_{18}$ HPLC. The structures of the compounds were determined mainly by NMR and mass spectroscopic data analyses. Sa-1, Sa-2 and Sa-3 were identified as diketopiperazines, and their structures were determined to be cyclo(prolyl-valyl), cyclo(prolyl-leucyl) and cyclo(prolyl-isoleucyl), respectively. This is the first time that these compounds were isolated from this mushroom. They showed antioxidant activity by scavenging DPPH radical $(EC_{50}\;0.15{\sim}0.18\;mM)$ and superoxide radical $(EC_{50}\;0.21{\sim}0.24\;mM)$.

• Archives of Pharmacal Research
• /
• v.13 no.2
• /
• pp.201-203
• /
• 1990

The efficient synthetic routes to cis-1-ethenyl-2-hydroxymethyl-cyclohexane, an useful synthetic intermediate, have been described. Access to the cis-disubstituted cyclo hexane is gained through the Clasen rearrangment and selective DHP protection of diol respectively.

• Journal of Animal Environmental Science
• /
• v.10 no.1
• /
• pp.29-36
• /
• 2004

These experiments were conducted to analyze the characteristics of organic compounds and molecular weight distribution according to the treatment steps of purifying system for pig wastewater. The results obtained are summarized as follow. 1. Raw pig wastewater contained 31 kinds of organic compounds such as acetic acid, 2-butanone, hexane, chloroform, propionic acid, butanoic acid etc. 2. After ozone treatment, 13 kinds of organic compounds such as ethene, pentane, 2-methylopropanal, hexane, furan and so on were detected in the wastewater. 3. After $TiO_2$ treatment, 12 kinds of organic compounds such as ethene, hexane, chloroform, 1-decene, silane and so on were detected from the effluent. 4. After both ozone and $TiO_2$ treatment, portion of molecular weight smaller than 500 Daltons and molecular weight between 500 to 1,000 Daltons in the wastewater increased.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.1
• /
• pp.5-26
• /
• 1996

O/W/O(oil in water in oil)형 유화액막에 의한 2성분 탄화수소 혼합물인 toluene-cyclo hexane의 분리에 있어서 투과율, 막의 안정성과 분리계수에 미치는 영향을 계면활성제 농도, emulsion과 용매와의 교반속도 등을 변수로 하여 실험하였다. 계면활성제의 농도가 증가함에 따라 투과율은 증가하는데 0.5wt% 이상에서는 증가율이 둔화 되었다. 막 파괴율은 0.1wt%에서 가장 낮게 나타났으며, 그 이상에서는 농도가 증가하면서 파괴율도 증가하였다. 또한 분리계수는 계면활성제의 농도가 0.5wt%에서 가장 높게 나타났다. 에멀젼 제조 시 교반속도 변화에서는 투과율이나 막 파괴율에 큰 영향을 미치지 않는 것으로 나타났다. 막 강화제의 농도가 증가함에 따라 투과율은 감소하였고, 에멀젼과 용매의 접촉 시 교반속도가 증가 할수록 막 파괴율도 증가하였다.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.2 s.50
• /
• pp.386-397
• /
• 1995

A cross sectional study was performed to evaluate the neurobehavioral effects of chronic exposure of complex organic solvents, using NCTB(Neurobehavioral Core Test Battery) recommended by WHO(World Health Organization). Forty female shoe factory workers and twenty-two controls matched with age were participated. The tests were performed in the morning before start of work, to exclude the effects of acute exposure. Workers were exposed mainly to toluene, methyl ethyl ketone, n-hexane, cyclo-hexane, dichloroethylene, trichloroethylene, benzene, xylenes etc. The ranges of present solvent exposure of hygienic effect were $0.46\sim0.71$ in the process using adhesives indirectly, and $1.83\sim2.39$ in the process using it directly. We reclassified the subjects, according to cumulative exposure. It showed significantly poorer performances in high exposed group on Santa Ana Dexterity and Benton Visual Retention, compared with control group. After controlling confounder, the significances were still remained. But, further cohort studies, having the information of personal exposure dose from entering a factory, are required to clarify the effects of chronic exposure of complex organic solvents in relation to dose and duration of exposure.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1319_1321
• /
• 2009

본 논문은 마이크로웨이브 플라즈마 프로세스에 의하여 사이클로헥산을 이용한 다이아몬드 박막 제작에 관한 산소유량 변화 및 파라메타 변화에 따른 분광분석 결과에 대하여 논하였다. 인가전력을 증가시킴에 따라서 수소원자의 $H_{\alpha}$ 및 $H_{\beta}$의 발광강도는 증가되는 반면에 CH(B-X) 발광강도는 일정하였으며, 헥산 유량을 증가시킴에 따라 CH(B-X) 라디칼의 발광강도가 증가되고, 산소유량을 증가시킴에 따라 CH(B-X) 라디칼이 산소원자와의 결합에 의해 밀도가 감소하여 발광강도가 감소되었다. 그리고, 산소가 공급되지 않은 경우에는 비정질 또는 DLC 성분이 많이 함유된 결정성이 거의 없는 다이아몬드 박막이 성장되었으며, 산소유량을 증가시킴에 따라서 결정 표면에 잔존하는 미결합 탄소성분들이 제거되면서 결정성이 향상됨을 알 수 있었다. 본 연구를 통하여 유기용매인 사이클로헥산을 이용하여 다이아몬드 박막이 성장됨을 확인할 수 있었다.

• Journal of Microbiology
• /
• v.34 no.4
• /
• pp.363-369
• /
• 1996

As basic study to evaluate the treatability of oil-contaminated environment with bacteria, isolation and characterization of crude oil-degrading bacterium were carried out. A bacterial strain SH-14 capable of degrading crude oil was isolated from contaminated soils by enrichment culture technique and identified as Acinetobacter sp. by morphological, cultural and biochemical characteristics, and so named Acinetobacter sp. SH-14. The optimal medium composition and cultural conditions for the growth and emulsification of crude oil by Acinetobacter sp. SH-14 used were crude oil of 2.0%, $KNO_3$ of 0.2%, $K_2HPO_4$ of 0.05%, and $MgSO_4\;{\cdot}\;7H_2O$ of 1.0%, along with initial pH 7.0 at $30^{\circ}C$. Acinetobacter sp. SH-14 showed to be resistant to chloramphenicol and utilized various hydrocarbons such as dodecane, hexadecane, isooctane, cyclo-hexane etc., as a sole carbon source. Acinetobacter sp. SH-14 harbored a single plasmid. By agarose gel electrophoresis and curing experiment it was found that the genes for crude oil components degradation were encoded on the plasmid.

• Elastomers and Composites
• /
• v.39 no.4
• /
• pp.318-323
• /
• 2004

Cloud-point and bubble-point curves for poly(ethylene-co-13.8 mol% octene) ($PEO_{13.8}$) and Poly(ethylene-co-15.3 mol% octene) ($PEO_{15.3}$) were determined up to $150^{\circ}C$ and 450 bar in hydrocarbons which have different molecular size and structure. Whereas ($PEO_{15.3}$+ n-pentane) system has cloud-point and bubble-point type transitions, ($PEO_{15.3}$+ n-propane) and ($PEO_{15.3}$+ n-butane) systems do only cloud-point type transition. In cyclo-pentane, -hexane, -heptane, and -octane, $PEO_{15.3}$ has a bubble-point transition. ($PEO_{13.8}$+ n-butane) mixture has a critical mixture concentration at 5 wt% PEO. (PEO + hydrocarbon) mixtures exhibit LCST type behavior. Solubility of PEO increases with hydrocarbon size due to increasing dispersion interaction which is favorable to dissolve PEO.