• 한국수소및신에너지학회논문집
• /
• 제9권3호
• /
• pp.111-118
• /
• 1998

The intrinsic degradation behavior of $(V_{0.53}Ti_{0.47})_{0.925}Fe_{0.075}$ alloy with BCC structure and the two plateau regions (the low and high plateau region) has been investigate during the temperature-induced hydrogen absorption-desorption cycling (thermal cycling). After 400 thermal cycles between room temperature and $600^{\circ}C$ under 10atm $H_2$, the total reversible hydrogen absorption capacity decreased by about 40%. From thermal desorption analysis it was found that the degradation behavior at each plateau region was different. In addition, XRD analysis showed that the crystal structure of the sample in de-hydrided state was changed from BCC to BCT after degradation, and that of the sample in hydrided state it was maintained as FCC although peaks were broadened after degradation. From the result of static isothermal hydrogenation treatment it were found that crystal structure change from BCC to BCT was caused by the thermal energy. TEM analysis showed that the peak broadening was due to the formation of an amorphous phase in FCC matrix.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.622-629
• /
• 1999

Effects of the fluorination in the $K_2$TiF\ulcorner solution and in-situ KF+ KOH electrolyte on the electrochemical charge-discharge properties of CaNi\ulcorner and the Mg-CaNi\ulcorner electrodes were investigated. In-situ fluorination in the KF+ KOH electrolyte compared with pre-fluorination in the$ K_2$TiF\ulcorner solution could improve the electrochemical cycling durability of CaNi\ulcorner and MG-CaN\ulcorner electrodes. The fluorinated layer on the alloy surface by pre-fluorination to improve the activity and anti-corrosion of the electrodes was dissolved in the pure KOH electrolyte during the cycling. The fluorinated layer was formed continuously on the surface of the electrode by thee2N KF addition in the 6N KOH electrolyte. The excess F\ulcorner ion addition in KOH electrolyte could improve the electrochemical cycling durability of CaNi\ulcorner and Mg-CaNi\ulcorner electrode. But, in case of MG-CaNi\ulcorner electrode, the discharge capacity of the electrode was reduced and the poor cycling property was shown with increasing of the MG process times.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 춘계 학술발표 강연 및 논문 개요집
• /
• pp.77-77
• /
• 1994

• 복식
• /
• 제63권8호
• /
• pp.156-170
• /
• 2013

The purpose of this research is to scrutinize the cyclist's consumer behavior by analyzing the eWOM information search behavior of cycle-wear according to benefits sought and involvement. The research was conducted through an online survey and the respondents were 291 men who wore cycle-wear and searched information via online. The results of this research are as following. First, the benefits sought from wearing cycle apparel are composed of five sub-factors such as, ideal body figure, brand ostentation, comfort ease, personality, and economic feasibility. In addition, the cycle-wear involvement consisted of two sub-factors: cycling involvement and fashion involvement. Second, the eWOM information search behavior of cyclists was different depending on the benefits sought by the cyclists. When the cyclists pursued ideal body figure they searched more information of design and color, while cyclists put more weight on the information of design, color, and brand when they sought brand ostentation. Moreover, the valence and the type of the information were dissimilar depending on the benefits sought. Third, the sub-factors of eWOM information search behavior affected the eWOM effect distinctively. The price information was the only factor that influenced the eWOM effect among the contents of the information. The valence of the information influenced the eWOM effect, and the effect of positive information was stronger than negative information. Additionally, the subjective information also affected the eWOM effect. Lastly, the effect of the benefits sought influencing the eWOM information search behavior varied by the difference of the cycle-wear involvement. For example, when they are both high in the involvement there were various benefits sought affecting the eWOM information search behavior. However, when only the cycling involvement was high, and they pursued personality, the price information was not important to them.

• Composites Research
• /
• 제19권1호
• /
• pp.22-28
• /
• 2006

금속재 라이너를 갖는 복합재 압력용기는 라이너의 반복 수명 향상을 위해 제조 공정 중 라이너가 압축잔류응력을 갖도록 하는 자긴처리 공정을 적용할 수 있다. 본 연구에서는 자긴처리에 의한 라이너의 압축잔류응력과 이후의 응력 거동을 정확히 예측할 수 있는 유한요소해석 기법을 제시하고, 이러한 해석 결과를 바탕으로 복합재 압력용기의 반복 수명을 예측할 수 있는 방법을 제안한다. 재료 및 기하학적 비선형성을 고려한 3차원 비선형 유한요소해석을 통해 라이너의 응력 거동을 정확히 예측하고, 압력용기의 반복수명을 결정짓는 파라미터로 금속재 라이너의 폰미세스 응력을 도입한다. 라이너 재료에 대한 피로시험과 복합재 압력용기 시제품에 대한 반복시험을 통해 제안된 방법의 타당성과 유효성을 입증한다.

• 마이크로전자및패키징학회지
• /
• 제10권3호
• /
• pp.9-17
• /
• 2003

In this paper, thermo-mechanical and rheological properties of NCPs (Non-Conductive Pastes) depending on silica filler contents and diluent contents were investigated. And then, thermal cycling (T/C) reliability of flip chip assembly using selected NCPs was verified. As the silica filler content increased, thermo-mechanical properties of NCPs were changed. The higher the silica filler content was added, glass transition temperature ($T_g$) and storage modulus at room temperature became higher. While, coefficient of thermal expansion (CTE) decreased. On the other hand, rheological properties of NCPs were significantly affected by diluent content. As the diluent content increased, viscosity of NCP decreased and thixotropic index increased. However, the addition of diluent deteriorated thermo-mechanical properties such as modulus, CTE, and $T_g$. Based on these results, three candidates of NCPs with various silica filler and diluent contents were selected as adhesives for reliability test of flip chip assemblies. T/C reliability test was performed by measuring changes of NCP bump connection resistance. Results showed that flip chip assembly using NCP with lower CTE and higher modulus exhibited better T/C reliability behavior because of reduced shear strain in NCP adhesive layer.

• 한국가스학회지
• /
• 제16권1호
• /
• pp.46-50
• /
• 2012

본 연구에서는 수압반복시험 장비를 이용하여 70 MPa용 Type 3의 수소복합용기에 대한 거동과 용기내부에 압력이 가해졌을 때 용기 거동을 유한요소법으로 해석하였다. 그 결과, 안전성과 경량성으로 주목받고 있는 Type3 수소용기는 실린더부에서 파열이 먼저 시작되었으며, 유한요소해석 결과에서도 동일한 양상을 확인하였다. 시험결과로 용기내부에 압력이 가해짐에 따라 실린더 몸통부가 부풀어 올라 돔너클과 실린더 몸통부가 가장 취약함을 알 수 있었다.

• 한국가구학회지
• /
• 제27권1호
• /
• pp.49-58
• /
• 2016

In modern society, designers started feeling moral and social responsibility in the aspect of environment as a position of suggesting something new. Rather than creating another waste to make something innovative, the concept of Upcycling which is about adding design or utilization to the existing recyclable materials to raise their value to products or art works has started settling down. Among them, there have been various researches on the use of offcut waste to be dumped. Such use of waste can be found in Jogakbo (patchwork), one of our traditional boudoir crafts. This could be connected to the concept of the modern Upcycling in the aspect of giving new values to the wasted pieces of fabric through needlework. Therefore, this study suggested Stitch work as new Upcycling furniture by seeking for the common connections between Upcycling and traditional Jogakbo, and then reinterpreting them in the same viewpoint. It was an opportunity not only to rediscover 'the esthetics of waste' by changing the awareness of 'behavior of dumping', but also to reinterpret or reconsider the tradition. Based on this, it is expected to continuously have new attempts to use offcut waste for eco-friendly design in the future, and also to have opportunities to seek for new directions of Upcycling to rediscover new values through the revaluation of valuelessness.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 추계 기술심포지움 초록집
• /
• pp.49-49
• /
• 2004

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1436-1441
• /
• 2006

Each type of optical sheets in a LCD module experiences a characteristic behavior for thermal loading and unloading. During thermal cycling, a polymeric behavior is reversible and recyclable, depending on a material stiffness critically affected by temperature and time. Some critical issues on temperature- and time-dependent themomechanical deformation of the polymeric sheet are addressed by finite-element thermal results, followed by structural simulation results in this study.