Browse > Article
http://dx.doi.org/10.7234/kscm.2006.19.1.022

Cycling life prediction method considering compressive residual stress on liner for the filament-wound composite cylinders with metal liner  

Park, Ji-Sang (한국기계연구원 신기능재료연구본부)
Jeung, Sang-Su (한국기계연구원 신기능재료연구본부)
Chung, Jae-Han ((주) 이노원)
Publication Information
Composites Research / v.19, no.1, 2006 , pp. 22-28 More about this Journal
Abstract
In manufacturing process of composite cylinders with metal liner, the autofrettage process which induces compressive residual stress on the liner to improve cycling life can be applied. In this study, a finite element analysis technique is presented, which can predict accurately the compressive residual stress on the liner induced by autofrettage and stress behavior after. Material and geometrical non-linearity is considered in the finite element analysis, and the Von-Mises stress of a liner is introduced as a key parameter that determines pressure cycling life of composite cylinders. Presented methodology is verified through fatigue test of liner material and pressure cycling test of composite cylinders.
Keywords
Filament-Wound Composite Cylinder; FEM; Pressure Cycling Life;
Citations & Related Records
연도 인용수 순위
  • Reference
1 D. E. James and A. Y. James, 'Graphite Epoxy Pressure Vessel Dome Reinforcement Study,' 32nd International SAMPE Symposium, April, 1987
2 T. K. Kwang, S. K. lung, Y. D. Doh, W. M. Cho and B. Jung, 'The Performance Improvement of Filament Wound Composite Pressure Vessels,' SAMPE 2000, May 21-25, 2000, pp. 1427-1438
3 Mohammad Z. Kabir, 'Finite Element Analysis of Composite Pressure Vessels with a Load Sharing Metallic Liner,' Composite Structure, Vol. 49, 2000, pp. 247-255   DOI   ScienceOn
4 J. De Carbalho, M. Lossie, D. Vandepitte and H. Van Brussel, 'Optimization of Filament-Wound part Based on Non-geodesic Winding,' Composites Manufacturing, Vol. 6, No.2, 1995, pp. 79-84   DOI   ScienceOn
5 X. K. Sun, S. Y. Du and G. D. Wang, 'Bursting Problem of Filament Wound Composite Pressure Vessels,' International Journal of Pressure Vessels and Piping, Vol. 76, 1999, pp. 55-59   DOI   ScienceOn
6 B. S. Kim et aI, 'Developing of Composite CNG pressure Vessels,' ICCM-I I, Int'l Conf. on Composite Materials, Gold Coast, Australia, July 14-18, 1997, pp. 401-418
7 박지상, 김태욱, 정재한, '대체연료 차량용 Type3 복합재 압력용기 개발 및 인증,' 한국수소 및 신에너지 학회, 2004, 추계학술대회, 2004. 10
8 J. P. Jeusette, G. Laschet. P. Chapentier and Ph. Delco, 'Finite Element Analysis of Composite Revolution Structure Wound by Wide plies,' Composite structure, Vol. 8, 1987, pp. 221-237   DOI   ScienceOn
9 Y. D. Doh, C. S. Hong, 'Progressive Failure Analysis for Filament Wound Pressure Vessel,' Journal of Reinforced Plastics and Composites, Vol. 14, 1995, pp. 1278-1306   DOI
10 D. V. Rosata and C. S. Grove, 'Filament Winding : Its Development, Manufacture, Application, and Design,' INTERSCIENCE PUBLISHERS, 1984