• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5915-5922
• /
• 2013

In this study, with the aim of improving the performance of shale to allow for its use as coarse aggregate for concrete, we coated shale aggregates with water repellents and polymers and evaluated their physical properties such as density, water absorption rate, wear rate, and stability depending on the coating method. In addition, the effects of the performance improvement were evaluated by assessing the properties of fresh concrete produced by varying the shale substitution ratio, as well as the compressive strength, flexural strength, and freeze-thaw resistance according to curing ages. The test results revealed that the absolute dry densities of all coated aggregates satisfied the standard density for coarse aggregates for concrete(>$2.50g/cm^3$),and the absorption rate of the shale aggregate coated with water repellent decreased by about 50% compared with that of uncoated shale. The wear rate of the polymer-coated shale decreased by up to 13.0% compared with that of uncoated shale. All coated aggregates satisfied the stability standard for coarse aggregates for concrete(${\leq}12$). The water repellent-induced performance improvement decreased the shale aggregates' slump by about 20~30mm compared with that of the uncoated shale aggregates, and the air content of the repellent-coated shale aggregate increased by up to 0.9% compared with that of the uncoated shale aggregate. The compressive strength of the polymer-coated shale aggregates at a curing age of 28 days was RS(F) 95.7% and BS(F) 90.0%, and the flexural strength was RS(F) 98.0 % and BS(F) 92.0% of the corresponding values of concretes produced using plain aggregates. Furthermore, the concrete using polymer-coated shale aggregates showed a dynamic modulus of elasticity of RS(F) 91% and BS(F) 88% after 300 freeze-thaw cycles, thus demonstrating improved freeze-thaw durability.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.170-175
• /
• 1980

A mass production of chestnut necessiates the development of economic long-term storage method. The main objective of this study was to confirm the technical aspect of the chestnut storage method which was developed by two year project and to review the method of commercial application. The chestnut used for the experiments were separated in brine $(5.5{\sim}6.0^{\circ}\:B{\acute{a}}ume)$ into matured and unmatured lots and fumigated with $CS_2$ at a 5 $lb/27\;m^3$ level for $25{\sim}30\;hrs.$ The chestnuts were packed in wooden boxes with sawdust (50% moisture) in the ratio of 1 : 1 by volume. The boxes were stored in the cold room $(1{\pm}1^{\circ}C,\;85{\sim}95%\;RH)$ and the cellar ($0{\sim}10^{\circ}C$, controlled only by circulating night cool air). The results obtained were as follows: 1. Fully matured chestnut could be successfully preserved $8{\sim}9\;months$ at a l0% decay level in the cold room and $4{\sim}5\;months$ months in cellar. 2. Immatured chestnuts wire inferior to the matured in storage stability. At the maximum storage period, its storage life was two months shorter. 3. The heat transfer equation of piled chestnuts with sawdust can be suggested as $T_{\infty}-T_0=(T_{\infty}-T_0){\cdot}10^{-t/320}$ and j and $f_h$ values were 1 and 320 min, respectively. 4. The chestnuts in the package of storage unit had longer shelf life than naked chestnut during the retail distribution at ambient temperature.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.4
• /
• pp.95-113
• /
• 2009

Objectives : Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) is a hair care product which is composed of ten plant extracts used in oriental medicine. This study was carried out to investigate the effects of Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) on hair regrowth and cytokine changes in a shaving model of C57BL/6 mice. Materials and Methods : Five-week-old mice were acclimated for 1 week at a temperature between $21-23^{\circ}C$, 40-60% relative humidity, and 12h of a light/dark cycle before beginning of the experiment. There were three experimental groups including 50% ethanol (EtOH, control), a positive control of 3% Minoxidil, and 30% Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) in 50% ethanol in 18 female mice. The test compounds were topically treated once a day over 12 days. The hair regrowth was photographically and histologically determined during the experimental period of 12 days. Revelation of EGF, $TGF-{\beta}1$ and IL-6 in hair follicle were also determined using immunohistochemistry. In addition to that, IL-6, $TNF-{\alpha}$, and $IL-1{\beta}$ in skin tissue were determined using enzyme-linked immunosorbent assay(ELISA). Results : Hair regrowth in 3% Minoxidil and Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) groups was promoted earlier and faster than the control group. Concentrations of hairs and thick-hair ratio in 3% Minoxidil and Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) groups were promoted than the control group. EGF was moderately positive in hair follicle of 3% Minoxidil and Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) groups, but negative in the control group. $TGF-{\beta}1$ was not significantly difference between the groups. IL-6 in hair follicle of Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) group was negative, but weakly positive in 3% Minoxidil and control group. IL-6 and $IL-1{\beta}$ in skin tissue were significantly decreased in Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) group, but there was not significantly decreased in 3% Minoxidil and control group. $TNF-{\alpha}$ in skin tissue was significantly decreased in 3% Minoxidil and Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) groups. Conclusions : These results suggest that Saengbal-eum-II($Sh{\bar{e}}ngf{\grave{a}}-y{\breve{i}}n-ll$) has hair growth promoting activity and it can be used for treatment of alopecia. And these effects relate to EGF revelation of hair follicle and a decrease IL-6, $TNF-{\alpha}$, and $IL-1{\beta}$ in skin tissue.

• Journal of Life Science
• /
• v.20 no.7
• /
• pp.1054-1065
• /
• 2010

SH21B is a natural composition composed of seven herbs: Scutellaria baicalensis Georgi, Prunus armeniaca Maxim, Ephedra sinica Stapf, Acorus gramineus Soland, Typha orientalis Presl, Polygala tenuifolia Willd and Nelumbo nucifera Gaertner (Ratio 3:3:3:3:3:2:2). In our previous study, we reported that SH21B inhibited adipogenesis and fat accumulation in 3T3-L1 cells through modulation of various regulators in the adipogenesis pathway. The aim of this study was to analyze the transcriptome profiles for the anti-adipogenic effects of SH21B in 3T3-L1 cells. Total RNAs from SH21B-treated 3T3-L1 cells were reverse-transcribed into cDNAs and hybridized to Affymetrix Mouse Gene 1.0 ST array. From microarray analyses, we identified 2,568 genes of which expressions were changed more than two-fold by SH21B, and the clustering analyses of these genes resulted in 9 clusters. Three clusters among the 9 showed down-regulation by SH21B (cluster 4, cluster 6 and cluster 9), and two clusters showed up-regulation by SH21B (cluster 7 and cluster 8) during the adipogenesis of 3T3-L1 cells. It was found that many genes related to cell proliferation and adipogenesis were included in these clusters. Clusters 4, 6 and 9 included genes which were related with adipogenesis induction and cell cycle arrest. Clusters 7 and 8 included genes related to cell proliferation as well as adipogenesis inhibition. These results suggest that the mechanisms of the anti-adipogenic effects of SH21B may be the modulation of genes involved in cell proliferation and adipogenesis.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.4
• /
• pp.222-228
• /
• 2014

Ni-rich system $Li[Ni_{1-x-y}Co_xMn_y]O_2$ of lithium secondary battery cathode material keep a high discharge capacity. However, by the Ni content increases, there is a problem that the electrochemical properties and stability of the structure are reduced. In order to solve these problems, research for positive ion doping is performed. The one of the cathode material, barium-doped $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01), was synthesized by the precursor, $Ni_{0.6}Co_{0.1}Mn_{0.3}(OH)_2$, from the co-precipitation method. The barium doped materials have studied the structural and electrochemical properties. The analysis of structural properties, results of X-ray diffraction analysis, and those results confirmed the change of the lattice from the binding energy in the structure by barium doping. Increased stability of the layered structure was observed by $I_{(006)}+I_{(102)}/I_{(101)}$(R-factor) ratio decrease. we expected that the electrochemical characteristics are improved. 23 mAh/g discharge capacity of barium-doped $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01) electrode is higher than discharge capacity of $Li[Ni_{0.6}Co_{0.1}Mn_{0.3}]O_2$ due to decrease overvoltage. And, through the structural stability was confirmed that improved the cycle characteristics. We caused a reduction in charge transfer resistance between the electrolyte and the electrode was confirmed that the C-rate characteristics are improved.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.143-150
• /
• 2012

A simulation methodology and corresponding program based on it is to be discussed for analyzing the effects of the networking operation of existing DHC system in connection with CHP system on-site. The practical simulation for arbitrary areas with various building compositions is carried out for the analysis of operational features in both systems, and the various aspects of thermal energy grids with connecting operation are highlighted through the detailed assessment of predicted results. The intrinsic operational features of CHP prime movers, gas engine, gas turbine etc., are effectively implemented by realizing the performance data, i.e. actual operation efficiency in the full and part loads range. For the sake of simplicity, a simple mathematical correlation model is proposed for simulating various aspects of change effectively on the existing DHC system side due to the connecting operation, instead of performing cycle simulations separately. The empirical correlations are developed using the hourly based annual operation data for a branch of the Korean District Heating Corporation (KDHC) and are implicit in relation between main operation parameters such as fuel consumption by use, heat and power production. In the simulation, a variety of system configurations are able to be considered according to any combination of the probable CHP prime-movers, absorption or turbo type cooling chillers of every kind and capacity. From the analysis of the thermal network operation simulations, it is found that the newly proposed methodology of mathematical correlation for modelling of the existing DHC system functions effectively in reflecting the operational variations due to thermal energy grids with connecting operation. The effects of intrinsic features of CHP prime-movers, e.g. the different ratio of heat and power production, various combinations of different types of chillers (i.e. absorption and turbo types) on the overall system operation are discussed in detail with the consideration of operation schemes and corresponding simulation algorithms.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.2
• /
• pp.93-100
• /
• 2009

This study has been carried out to look into the characteristics of an oxidative-dissolution of fission products (FP) co-dissolved with uranium (U) in a $(NH_4)_2CO_3$ carbonate solution. Simulated FP-oxides which contained 12 components have been added to the solution to examine their dissolution characteristics. It is found that $H_2O_2$ is an effective oxidant to minimize the oxidative-dissolution of FP. In the 0.5 M $(NH_4)_2CO_3$-0.5 M $H_2O_2$ solution, some elements such as Re, Te, Cs and Mo seem to be dissolved together with U, while 98${\pm}$2% for Re and Te, 94${\pm}$2% for Cs, and 29${\pm}$2 % for Mo are dissolved for 2 hours. It is revealed that dissolution rates of Re, Te and Cs are high (completely dissolved within 10${\sim}$20 minutes) due to their high solubility in the $(NH_4)_2CO_3$ solution regardless of the addition of $H_2O_2$, and independent of the concentrations of $Na_2CO_3$ and $H_2O_2$. However, the dissolution ratio of Mo seems to be slightly increased with time and about 33 % for 4 hours, indicating a very slow dissolution rate and also independent of the $(NH_4)_2CO_3$ concentration. It is found that the most important factor for the oxidative-dissolution of FP is the pH of the solution and an effective dissolution is achieved at a pH between 9${\sim}$10 in order to minimize the dissolution of FP.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.503-514
• /
• 2011

In this research, the seismic connection details for two concrete-filled U-shape steel beam-to-H columns were proposed and cyclically tested under a full-scale cruciform configuration. The key connecting components included the U-shape steel section (450 and 550 mm deep for specimens A and B, respectively), a concrete floor slab with a ribbed deck (165 mm deep for both specimens), welded couplers and rebars for negative moment transfer, and shear studs for full composite action and strengthening plates. Considering the unique constructional nature of the proposed connection, the critical limit states, such as the weld fracture, anchorage failure of the welded coupler, local buckling, concrete crushing, and rebar buckling, were carefully addressed in the specimen design. The test results showed that the connection details and design methods proposed in this study can well control the critical limit states mentioned above. Especially, the proposed connection according to the strengthening strategy successfully pushed the plastic hinge to the tip of the strengthened zone, as intended in the design, and was very effective in protecting the more vulnerable beam-to-column welded joint. The maximum story drift capacities of 6.0 and 6.8% radians were achieved in specimens A and B, respectively, thus far exceeding the minimumlimit of 4% radians required of special moment frames. Low-cycle fatigue fracture across the beam bottom flange at a 6% drift level was the final failure mode of specimen A. Specimen B failed through the fracture of the top splice plate of the bolted splice at a very high drift ratio of 8.0% radian.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.299-306
• /
• 2010

This study was performed to develop new functional red ginseng drinks with Astragali Radix and Opuntia humifusa. Optimum extraction conditions such as solvent property and temperature for Astragali Radix were determined by distilled water vs. ethanol (95%) ratio (0:100, 25:75, 50:50, 75:25) and 60 vs. $80^{\circ}C$. Water-soluble extracts at $80^{\circ}C$ showed higher antioxidant activities than fat-soluble extracts at $60^{\circ}C$. Viscosities of 1-2% (w/v) of Opuntia humifusa solution were similar to that of the 0.1% guar gum solution. Addtion of Astragali Radix (3% and 5%, w/v) and Opuntia humifusa (1.2%, w/v), especially, had effect on the changes of pH of the red ginseng solution(5%, w/v) during storage for 7 days. A significant difference during the storage was shown in total plate counts by addition of Opuntia humifusa (1.2%, w/v) and microorganisms were reduced by six log cycles. Significant antiproliferation effects of red ginseng (5%, w/v) solution with Astragali Radix (3% & 5%, w/v) and Opuntia humifusa (1.2%, w/v) on Colon26m-3.1 carcinoma (colorectal carcinoma) cell and U87-MG neuronale glioblastoma (brain carcinoma) cell were not observed.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.4
• /
• pp.113-132
• /
• 2019

The degree of females' participation in corporate activity has been recently increased over the world and females' participation in economic activity may be new dynamic fuel for the Korean economy that falls into the vicious cycle of low growth. Start-up, therefore, has increasingly taken attention as an opportunity for females whose careers were interrupted to re-enter the labor market. The need for studies that examine factors influencing the decision of start-up is also increased along with the increase of the ratio of females' start-up. This study aims to verify effects of the women's characteristics(women discrimination, women's role conflict) and the human networks of females whose careers were interrupted, with the intention for entrepreneurial intention, which are mediated by personal attitudes and subjective norm suggested by Ajzen's Theory of Reasoned Action, based on an empirical research. The findings show that the human networks of females have an effect on attitudes toward start-up activity and subjective norm and the woman discrimination influence the personal attitudes. In contrast, the women's role conflict have no effect on both personal attitude toward start-up activity and subjective norm. This can be supposed as an outcome resulted from the subjects' low level of conflict caused by their sex roles, on their age distribution. The relation between subjective norm and entrepreneurial Intention seemed to be moderated by their perceived strong entrepreneurial supporting policy. Their attitudes toward start-up activity were found to have a mediating effect on the relation between the women discrimination, human networks and entrepreneurial Intention, while the subjective norm only mediated the relation between human networks and entrepreneurial Intention. Based on such results, this study attempts to suggest theoretical suggestions and the direction of various entrepreneurial supporting policy for the increase and the growth of start-up of females whose careers were interrupted, in Korea.