• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2048-2061
• /
• 1991

As compared with other cutting types, the ball end milling process causes a complexity in cutting system and a falling-off of machinability. In order to increase the productivity and efficiency in th NC machining of sculptured surfaces, this study carried out the qualitative linearized evaluation about the ball end milling system and applied their practical expressions to the technological processor at the cutter path planning stage. The evaluated expressions were proved to be adequate for practical use from an accuracy point of view and the estimation models were applied to sculptured surface machining processes for finding variable machining conditions. Consequently, it was recognized that variable machining conditions bring about the dispersion of force system and the reduction of machining time by more than 50%.

• Journal of Radiation Industry
• /
• v.4 no.3
• /
• pp.253-257
• /
• 2010

This experiment was carried out to investigate the effects of gamma-radiation on the rooting, growth, and color mutation in poinsettia. Using 10 poinsettia varieties ('Lollipop', 'Little Peace', 'Happy Day', 'Early Bird', 'Pixy Red', 'Happy Time', 'Heidi', 'Red Bell', 'Clara', and 'Scarlet') bred by National Institute of Horticultural and Herbal Science, 100 Gy of gamma ray was irradiated at the stage of callused cuttings. Four weeks after sticking cuttings in the rooting media, 8 cultivars showed 100% of root formation, but 'Early Bird' rooted 24.4% and even died off during the cutting propagation. After planting rooted cuttings, survival rate until flowering time varied among irradiated cultivars. While 'Pixy Red' and 'Heidi' survived about 98%, 'Clara', 'Happy Day', and 'Early Bird' survived lesser than 30%. All irradiated plants showed remarkably shorter plant height, lesser branch numbers than non-irradiated control plants. Thirty color mutants were obtained among 281 plants survived until flowering time. Nine mutants were complete color mutated branches, whereas 21 mutants were partially color mutated bracts and transitional leaves. Color patterns mutated by 100 Gy of gamma ray were divided into pink, hot pink, light red and spotted (pink spots with red main color). Pink mutants were commonly obtained. Complete color mutants were discovered from 4 plants of 'Pixy Red', 2 plants of 'Red Bell' and 3 plants of Lollipop.

• Journal of architectural history
• /
• v.14 no.2 s.42
• /
• pp.143-157
• /
• 2005

This study aims to analyze functions and characteristics of 'Cha-il(遮日)' which was used at ritual events(宮中儀禮行事) in the Joseon dynasty, Joseon dynasty had many ritual events related with O-Rae(五禮). Cha-il was almost used at important ritual events, especially at the congratulatory events. The congratulatory events(宮中宴享) are the representative events were held with many temporary install facilities(假設施設) in a palace. Cha-il was a kind of Korean traditional membrane structures. Cha-il was set up for cutting off interior space from sunlight and rain. In general, Cha-il was Consisted of Cha-il-jang(遮日帳:woven fabric), Cha-il-jook(遮日竹:bamboo column), some ropes, and fixing wares. In the congratulatory events, three types of Cha-il. were set up. Baek-mok-Dae-Cha-il(白木大遮日)was made of cotton cloth. Yu-Dun-Cha-Il(油芚遮日) was made of oiled paper or oiled cotton cloth. Man-Joen-Cha-Il(滿箭遮日) consisted of wooden structure. Baek-mok-Dae-Cha-il(白木大遮日)was set up on the most important area of stage for protecting from sunlight. Yu-Dun-Cha-Il was set up on less important area of stage for protecting from sunlight and rain. Man-Joen-Cha-Il was set up below Baek-mok-Dae-Cha-il for supporting and draining raindrops off. The results of this study were as follows; Functions of Cha-il were to protect ritually space from sunlight and rain, and to extend ritually space, and to reconstruct ritually space. Cha-il was the peculiar temporary install facility which differed from other countries.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.19-27
• /
• 2013

This paper implements the standby power control system composed of a master device and slave devices. The standby power is managed by cutting power supply after controlling the relay of a slave device based on the authentication of master device's RFID card. RFID interface and wireless communication module are embedded in a master device, and one master device is linked with many slave devices in wireless. Each slave device executes the operation needed in power control independently. We implements the function of manual power on/off system in a slave device, and the function of user ID enrollment by switch manipulation in a master device. Also this system can communicate bidirectionally in wireless and runs on TinyOS. The result of experiment shows that the user authentication is executed in a master device and this authenticated information is transmitted to a slave device in wireless, and standby power is cutted by controlling the relay of a slave device. Installing this system in a building or an office, we can expect energy saving.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.94-100
• /
• 2016

A novel optical design for high resolution, large field of view (FOV) and multispectral remote sensing is presented. An f/7.3 Korsch and two f/17.9 Cook three-mirror optical systems are integrated by sharing the primary and secondary mirrors, bias of the FOV, decentering of the apertures and reasonable structure arrangement. The aperture stop of the Korsch system is located on the primary mirror, while those of the Cook systems are on the exit pupils. High resolution image with spectral coverage from visible to near-infrared (NIR) can be acquired through the Korsch system with a focal length of 14 m, while wide-field imaging is accomplished by the two Cook systems whose focal lengths are both 13.24 m. The full FOV is 4°×0.13°, a coverage width of 34.9 km at the altitude of 500 km can then be acquired by push-broom imaging. To facilitate controlling the stray light, the intermediate images and the real exit pupils are spatially available. After optimization, a near diffraction-limited performance and a compact optical package are achieved. The sharing of the on-axis primary and secondary mirrors reduces the cost of fabrication, test, and manufacture effectively. Besides, the two tertiary mirrors of the Cook systems possess the same parameters, further cutting down the cost.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.191-204
• /
• 1998

The feasibility of fly ash was evaluated as an alternative liner material to the conventional clay liner of landfills through modeling and laboratory experiments. In order to consider the effect of unsaturation on water flow through the liner, analyses were made to compare flow characteristics in saturated liner with that of unsaturated one. Contaminant migration characteristics in liners were investigated by batch experiment and modeling, in which phenol was employed as a model was solved by numerical techniques of finite difference method and predictor-corrector method to deal with high non-linearity. Sequential method was used to handle the system of differential equations. Results show that the alternative liner material is more capable of cutting off water flow in unsaturated condition and in preventing phenol from passing through it. It can be seen that, under the flow conditions considered in this study, the conventional saturation approach underestimates the amount of water passing through the liner and doers the cut-off capability against phenol significantly.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.466-471
• /
• 2017

SOTM is a device for the satellite communication on the move. Many studies are conducted on microstrip, waveguide and array antenna for the low profile of the SOTM's antenna. But those antennas have a problem that is difficult to adjust the polarization, and for that reason we have studied the parabolic antenna structure. The general form of parabolic reflector structure is circular, but we used cut-off shape reflector by cutting the upper and lower reflector for low profile antenna. Accordingly, this results in the decrease of reflector area which causes reduced gain and G/T ratio. In order to solve this problem, we have transformed and designed the sub reflector for improving the efficiency and gain of the cut- off shape parabolic antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.592-602
• /
• 2013

The purpose of this study is to optical cable closure and fiber line monitoring system. The current optical cable closure cases have not had any systems that help the central control station recognize opening as well as closing the cases in real-time when opening B2B and B2C lines. to solve this problem, it is considered to create systems that go off alarms, real-time fault location immediately, set alarms for open and close monitoring optical cable closure, and inspect regularly whether optical cables are deficient when monitoring the optical line in real-time and cutting them, in this paper, the monitoring system whose the central control station finds an optical signal block immediately and goes off the alarms when line workers separate components like a connector or a tray from the optical cable closure through OTDR. this study can contribute to stabilize the network quality through the quick and effective operation of the cables.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.358-363
• /
• 2007

Reinforcing steel work plays an important role in terms of its structural performance or weight of construction cost for reinforced concrete structures. Precise estimation of re-bar quantity gives a basis for managing the reinforcing steel work effectively. However, the estimation process is still performed ineffectively based upon the expert's experience or manpower in spite of the advanced technology or improvement efforts. Therefore, the purpose of this research is to develop a prototype system for taking-off the quantity of reinforcing steel bars quickly and accurately in an order consistent with the specific members identified on the drawings. An estimate algorithm considering the connection, settlement and coating thickness of re-bars was suggested regarding to their replacement conditions which places more emphasis on constructibility. Also, this system produces the shop drawings automatically with the calculation results.

• ALGAE
• /
• v.35 no.4
• /
• pp.389-404
• /
• 2020

Red algal fertilization is unusual and offers a different model to the mechanism of intracellular transport of nuclei and polyspermy blocking. A female carpogonium (egg) undergoes plasmogamy with many spermatia (sperm) simultaneously at the receptive structure, trichogyne, which often contains numerous male nuclei. The pattern of selective transport of a male nucleus to the female nucleus, located in the cell body of the carpogonium, remain largely unknown. We tracked the movement of spermatial nuclei and cell organelles in the trichogyne after plasmogamy using time-lapse videography and fluorescent probes. The fertilization process of Bostrychia moritziana is composed of five distinctive stages: 1) gamete-gamete binding; 2) mitosis in the attached spermatia; 3) formation of a fertilization channel; 4) migration of spermatial nuclei into the trichogyne; and 5) cutting off of the trichogyne cytoplasm from the rest of the cell after karyogamy. Our results showed that actin microfilaments were involved in the above steps of fertilization, microtubules are involved only in spermatial mitosis. Time-lapse videography showed that the first ("primary") nucleus which entered to trichogyne moved quickly to the base of carpogonium and fused with the female nucleus. The transport of the primary male nucleus to the egg nucleus was complete before its second nucleus migrated into the trichogyne. Male nuclei from other spermatia stopped directional movement soon after the first one entered the carpogonial base and oscillated near where they entered trichogyne. The cytoplasm of the trichogyne was cut off at a narrow neck connecting the trichogyne and carpogonial base after gamete nuclear fusion but gamete binding and plasmogamy continued on the trichogyne. Spermatial organelles, including mitochondria, entered the trichogyne together with the nuclei but did not show any directional movement and remained close to where they entered. These results suggest that polyspermy blocking in B. moritziana is achieved by the selective and rapid transport of the first nucleus entered trichogyne and the rupture of the trichogyne after gamete karyogamy.