• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.467-474
• /
• 2002

Colluvial sell has a very unique deformation property, particularly when it is subject to the cutting work entailed in a variety of construction. In this study, the cut slope tying on a colluvial layer in which the transmission tower had been installed were investigated to find out the cause of deformation. In-situ tests such as boring, surface-wave analysis (MASW) were employed to look into the physical composition of underground layers and FEM including LEM were carried out to simulate the construction steps. The result shows that the stress relaxation followed by road construction induced the deformation of the slope and damage in the foundation of the transmission tower.

• Geomechanics and Engineering
• /
• v.12 no.2
• /
• pp.269-294
• /
• 2017

This study aimed to realize the creation of fuzzy stochastic damage to describe reliability more essentially with the analysis of harmony of damage conception, probability and fuzzy degree of membership in interval [0,1]. Two kinds of fuzzy behaviors of damage development were deduced. Fuzzy stochastic damage models were established based on the fuzzy memberships functional and equivalent normalization theory. Fuzzy stochastic damage finite element method was developed as the approach to reliability simulation. The three-dimensional fuzzy stochastic damage mechanical behaviors of Jianshan mine slope were analyzed and examined based on this approach. The comprehensive results, including the displacement, stress, damage and their stochastic characteristics, indicate consistently that the failure foci of Jianshan mine slope are the slope-cutting areas where, with the maximal failure probability 40%, the hazardous Domino effects will motivate the neighboring rock bodies' sliding activities.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.1
• /
• pp.9-22
• /
• 1975

As a second step of a thermal stress analysis in a watertight bulkhead plate during welding of a spool type penetration piece, is idealized as a thin circular disk with a clamped boundary. The exact solution for the transient temperature distribution and associated quasi-static thermal stresses which arise in a circular disk subjected to an instantaneous point source of heat acting in its interior has been obtained. And the solutions have been extended to the case of moving source of heat with the aid of the Duhamel's superposition integral and the results finally derived have been compared with the other results from the typical cases. The solutions can be applied to the problem such as a welding of a penetration piece on the watertight bulkhead and also applicable to the problems which occur in cutting or welding.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1392-1397
• /
• 2010

Currently in increasing number of urban tunnels with small overburden are excavated according to the principle of the New Austrian Tunneling Method(NATM). Successful design, construction and maintenance of NATM tunnel demands prediction, control and monitoring of ground displacement and support stress high accuracy. A magnetic anisotropy sensor is used for non-destructive measurement of stress on surfaces of a ferromagnetic material, such as steel. The sensor is built on the principle of the magneto-strictive effect in which changes in magnetic permeability due to deformation of a ferromagnetic material is measured in a non-destructive manner, which then can be translated into the absolute values of stresses existing on the surface of the material. This technique was applied to measure stresses of H-beams, used as tunnel support structures, to confirm expected measurement accuracy with reading error of about 10 to 20MPa, which was confirmed by monitoring strains released during cutting tests The results show that this method could be one of the promising technologies for non-destructive stress measurement for safe construction and maintenance of underground rock structures encountered in civil and mining engineering.

• Journal of Biosystems Engineering
• /
• v.30 no.4 s.111
• /
• pp.220-228
• /
• 2005

This study was conducted to investigate the main factors that contain a rotating velocity ratio between wheel and conveyor belt, a tilt angle of conveyor belt and a rotating velocity of a dick cutter for mechanization of Chinese leek harvest. In the survey on the cultivation of Chinese leek, row spacing of 350 m and cutting height of 10 mm from the ground were set up for field tests. Test equipment was designed to cut, pick up and convey Chinese leek one row by one row. From the results of material tests, pick-up height of conveyor belt was set up at $60\~90m$ from the bottom, and the strain and stress at rupture of Chinese leek was 0.487 m/m and 0.01078 MPa. An elastic coefficient of the rubber (Neoprene) of conveyor belts was 1.1077 under the strain of 0.3 nym. from the results of field tests, the tilt angle of conveyor belt was the range of $25^{\circ}\~30^{\circ}$ under consideration far space of container, the velocity ratio between vehicle and conveying belt was 1 to 2.4~1.7 at 0.1~0.3 m/s of vehicle, and optimum rotating velocity of the disk cutter was 34.8 m/s or more under consideration for soil friction.

• Journal of the Korean Society of Food Culture
• /
• v.4 no.2
• /
• pp.167-172
• /
• 1989

Kimchi during fermentation with different periods of storage at room temperature were evaluated for the textural properties, titratable acidity, pH value and thickness of leaves in salting, during fermentation. Thickness of internal leaves in Korean cabbage were decreased of 50% for external leaves. but less decreased on the thickness of leaves in salting. Cutting force of leaves were increased with salting and during kimchi fermentation before 7 days. Stress (force vs area) in kimchi and Korean cabbage was same result of cutting force. Equation of pH change was y=-0.23x+6.13 (r=-0.97). Titratable acidity equation was y=0.09x-0.01(r=0.96). A desirable pH value and titratable acidity were 4.2 and 0.63% in kimchi fermentation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.3
• /
• pp.242-247
• /
• 2017

Humic acid (HA) is a complex organic matter found in the environments, especially in grassland soils with a high density. The bioactivity of HA to promote plant growth depends largely on its extraction sources. The quality-control of HA and the quality improvements via an artificial synthesis are thus challenging. We recently reported that a polymeric product from fungal laccase-mediated oxidation of catechol and vanillic acid (CAVA) displays a HA-like activity to enhance seed germination and salt stress tolerance in a model plant, Arabidopsis. Here, we examined whether HA or CAVA enhances the growth of Italian ryegrass seedling. Height and fresh weight of the plant with foliar application of HA or CAVA were bigger than those with only water. Interestingly, enhanced root developments were also observed in spite of the foliar treatments of HA or CAVA. Finally, we proved that HA or CAVA promotes the regrowth of Italian ryegrass after cutting. Collectively, CAVA acts as a HA mimic in Italian ryegrass cultivation, and both as a biostimulant enhanced the early growth and regrowth after cutting of Italian ryegrass, which could improve the productivity of forage crops.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.290-296
• /
• 2019

Head-up displays for vehicles play an important role in displaying various information about the safety and convenience of driving on the windshield of the vehicle. In this study, ultra-precision machining was performed and evaluated as a method for machining a large-area aspheric free-form mirror that is applicable to augmented reality technology. Precision diamond cutting is highly accurate and suitable for the production of advanced parts with excellent surface integrity, low surface roughness, and low residual stress. By using an aspheric free-form mold, it is possible to improve the optical transfer function, reduce the distortion path, and realize a special image field curvature. To make such a mold, the diamond cutting method was used, and the result was evaluated using an aspherical shape-measuring machine. As a result, it was possible to the mold with shape accuracy (PV) below $1{\mu}m$ and surface roughness (Ra) below $0.02{\mu}m$.

• Corrosion Science and Technology
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2019

To find proper lathe machining parameters for SA182 Grade 304 stainless steel (SS), six kinds of samples with different machining surface states were prepared using a lathe. Surface morphologies and microstructures of near surface deformed layers on different samples were analysed. Surface morphologies and chemical composition of oxide films formed on different samples in simulated primary water with $100{\mu}g/L\;O_2$ at $310^{\circ}C$ were characterized. Results showed that surface roughness was mainly affected by lathe feed. Surface machining caused grain refinement at the top layer. A severely deformed layer with different thicknesses formed on all samples. In addition to high defect density caused by surface deformation, phase transformation, residual stress, and strain also affected the oxidation behaviour of SA182 Grade 304 SS in the test solution. Machining parameters used for # 4 (feed, 0.15 mm/r; back engagement, 2 mm; cutting speed, 114.86 m/min) and # 6 (feed,0.20 mm/r; back engagement, 1 mm; cutting speed, 73.01 m/min) samples were found to be proper for lathe machining of SA182 Grade 304 SS.

• Journal of Environmental Science International
• /
• v.31 no.4
• /
• pp.369-372
• /
• 2022

This study was conducted to determine the injury type and frequency of bearded dragons during single and group breeding according to stocking density, for 16 weeks. A total of 14 bearded dragons compromising three groups were selected for this study. Six and four bearded dragons bred in a cage of 45 cm × 45 cm × 45 cm were designed as group A and B, respectively. Group C was made of four partitions (20 cm × 20 cm × 20 cm) of equal size in the kennel, and the dragons, four in number, were reared alone. Injury type criteria were given 1 score each in 6 stages. Most of the injury types in group A were primary tail cutting, which was 1 point, depending on the score, except for 4 scores. The injury type of group A varied, that is 1, 2, 3, and 5 scores, and the pattern lasted for 2 to 9 weeks. After 10 weeks, the dragons showed no response to injury type, except 4 scores at 11 weeks and 2 scores at 14 weeks with a frequency of one, respectively. The representative injury types of the group B were primary tail cutting, which was 1 point, and the scores of the injury type from 2 to 11 weeks were the highest; the frequency of occurrence at 1 and 2 scores was 5 times and 3 times, respectively, and the frequency of occurrence at 3 scores was twice. In addition, 5 scores were found to have the lowest frequency of occurrence. Solitary breeding showed no response to the type of injury for 16 weeks. Consequently, single breeding with an appropriate stocking density did not affect stress, and it could be expected a positive aspect for pet welfare.