[KSCI] Korea Science Citation Index Service

http://dx.doi.org/10.14773/cst.2019.18.1.1

Effects of Surface Machining by a Lathe on Microstructure of Near Surface Layer and Corrosion Behavior of SA182 Grade 304 Stainless Steel in Simulated Primary Water

Zhang, Zhiming (Laboratory of Nuclear Materials and Safety Assessment, Liaoning Key Laboratory for Safety and Assessment Technique of Nuclear Materials, Institute of Metal Research, Chinese Academy of Sciences)
Wang, Jianqiu (Laboratory of Nuclear Materials and Safety Assessment, Liaoning Key Laboratory for Safety and Assessment Technique of Nuclear Materials, Institute of Metal Research, Chinese Academy of Sciences)
Han, En-hou (Laboratory of Nuclear Materials and Safety Assessment, Liaoning Key Laboratory for Safety and Assessment Technique of Nuclear Materials, Institute of Metal Research, Chinese Academy of Sciences)
Ke, Wei (Laboratory of Nuclear Materials and Safety Assessment, Liaoning Key Laboratory for Safety and Assessment Technique of Nuclear Materials, Institute of Metal Research, Chinese Academy of Sciences)

Publication Information

Corrosion Science and Technology / v.18, no.1, 2019 , pp. 1-7 More about this Journal

Abstract

To find proper lathe machining parameters for SA182 Grade 304 stainless steel (SS), six kinds of samples with different machining surface states were prepared using a lathe. Surface morphologies and microstructures of near surface deformed layers on different samples were analysed. Surface morphologies and chemical composition of oxide films formed on different samples in simulated primary water with $100{\mu}g/L\;O_2$ at $310^{\circ}C$ were characterized. Results showed that surface roughness was mainly affected by lathe feed. Surface machining caused grain refinement at the top layer. A severely deformed layer with different thicknesses formed on all samples. In addition to high defect density caused by surface deformation, phase transformation, residual stress, and strain also affected the oxidation behaviour of SA182 Grade 304 SS in the test solution. Machining parameters used for # 4 (feed, 0.15 mm/r; back engagement, 2 mm; cutting speed, 114.86 m/min) and # 6 (feed,0.20 mm/r; back engagement, 1 mm; cutting speed, 73.01 m/min) samples were found to be proper for lathe machining of SA182 Grade 304 SS.

Keywords

Surface machining; Cold-working; Microstructure; SS; Oxidation;

Citations & Related Records

Reference

1	S. Ghosh, M. K. Kumar, V. Kain, Appl. Surf. Sci., 264, 312 (2013). DOI
2	S. Ghosh, V. Kain, J. Nucl. Mater., 403, 62 (2010). DOI
3	S. Ghosh, M. K. Kumar, V. Kain, Adv. Mat. Res., 794, 564 (2013). DOI
4	H. L. Ming, Z. M. Zhang, S. Y. Wang, J. Q. Wang, E.-H. Han, W. Ke, Mater. Corros., 66, 869 (2015). DOI
5	R. W. Staehle, J. A. Gorman, Corrosion, 59, 931 (2003). DOI
6	Y. J. Kim, Corrosion, 55, 81 (1999). DOI
7	Y. J. Kim, Corrosion, 56, 389 (2000). DOI
8	M. S. Li, High Temperature Corrosion of Metals, 1st ed., p. 184, Metallurgical Industry Press, Beijing (2001).