• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.203-206
• /
• 2008

본 연구는 고체 추진기관에 적용되는 내열재를 autoclave 방식이 아닌 hot press molding으로 제작하여 연소관에 접착 가능한 상태의 내열재로 제작하는데 초점을 두고 있다. EPDM/kevlar를 기본 조성으로 내열재 원료가 구성되고, 미가류 sheet 상태로 공급된다. 전방 내열재는 금형을 사용하여 preform 상태로 1차 제작하고, boots를 구형하기 위해 두개의 preform 사이에 modified nylon film을 사용하여 제작 하였다. 실린더 부위를 포함하고 있는 후방 내열재는 특별히 설계된 하나의 금형으로 제작되었고, boots 부위는 초경합금 칼날을 가지고 있는 장비에 의해 실현되었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권6호
• /
• pp.525-528
• /
• 2011

A deep circumflex iliac artery (DCIA) flap is usually used for reconstruction in oral and maxillo-facial surgery department since introduced by O'Brien in 1975. Various flap designs are possible for osteomusculocutaneous, musculocutaneous, musculosseous and vascularized bone types. Iliac crest shape is similar to contour of mandible. Moreover, though a fibular flap has only 15~20 mm of cutting plane width, a DCIA flap contains much more bone amount, making this a similar reconstruction compare with normal mandible. A 68 year-old male with squamous cell carcinoma on the anterior floor of the mouth had an impression with T2N0Mx and the treatment procedure was DCIA reconstruction after wide resection and marginal mandibulectomy, with both supraomohyoid neck dissection. We present an experience of DCIA flap for reconstruction with a literature review.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.41-41
• /
• 2010

In this research, to study tungsten carbide alloy(Co 0.5%) ultra precision turning possibility that is used Glass Molding Press(GMP) using conventional (Rake angle $-25^{\circ}$) single crystal diamond bite observed machining surface condition, surface roughness($R_a$), diamond bite cutting edge after tungsten carbide alloy ultra precision turning. Suggested and designed optimum chamfer bite shape to suggest ultra precision optimum bite using Finite Element Analysis(FEM). After machining tungsten carbide alloy ultra precision turning using optimum chamfer bite and comparing with conventional bite machine result and studied optimum chamfer bite design inspection and also tungsten carbide ultra precision turning possibility for high temperature compression glass lens molding.

• 한국작물학회지
• /
• 제36권6호
• /
• pp.540-544
• /
• 1991

유채의 협열개에 관한 기초자료를 얻고자 strain gauge를 이용하여 예취 후의 건조 중에 있는 유채 양질의 협열개 난역도를 측정하였던 바 다음과 같은 결과를 얻었다. 1. 협실의 발육에서 협은 개화 후 3-4일째에는 육안으로 볼 수 있었으며, 협장은 20일째 중에, 종자의 장경은 35일째에 최대에 달했고, 40일째 쯤에는 종자가 거의 구형으로 되었으며, 45일째 쯤에는 협의 굵기가 최대에 달했다 2. 예취 후의 협실수분함량의 추이는 예취 당시가 70%였고 house내에서 5일정도 건조한 결과는 30%에 달했고 14일째까지는 10%정도였다 3. 협열개 난역도는 협실수분함량이나 상대습도에 대응한 일변화가 보였으며 협실수분함량 및 상대습도가 낮을 수록 협열개가 어려웠다.

• 소성∙가공
• /
• 제14권3호
• /
• pp.245-250
• /
• 2005

Recently, micro machining technology for high precision mold becomes more interested for mass production of high performance optical parts micro-grooved on the surface, which is under very active development due to its effectiveness in the view point of optical performance. Mechanical micro machining technology now has more competitiveness on lithography, MEMS or LIGA processes which have some problems to fabricate especially cylinder type of groove in such as lenticular lens for illumination angle modulation system. In this study. a lenticular lens mold with U-type micro groove is fabricated making utilizing of the benefit of the mechanical micro machining technology. A shaping machining process is adapted using 3 axis degree of freedom micro machining system and single crystal natural diamond tool. A brass and a electroless nickel materials are used for mold fabrication. Machining force, chip shape and machined surface are investigated from the experiment and an optimal machining condition is found based on the examined problems from the micro cutting process.

• Steel and Composite Structures
• /
• 제25권5호
• /
• pp.535-544
• /
• 2017

Box sections are symmetrical sections and they have high moment of inertia in both directions, therefore they are good members in tall building structures. For the rigid connection in structures with box column continuity plates are used on level of beam flanges in column. Assembly of the continuity plates is a difficult and unreliable work due to lack of weld or high welding and cutting in the fourth side of column in panel zone, so the use of experimental stiffeners have been considered by researchers. This paper presented an experimental investigation on connection in box columns. The proposed connection has been investigated in four cases which contain connection without internal and external stiffeners(C-0-00), connection with continuity plates(C-I-CP), connection with external vase shape stiffener (C-E-VP) and connection with surrounding plates(C-E-SP). The results show that the connections with vase plates and surrounding plates can respectively increase the ultimate strength of the connection up to 366% and 518% than the connection without stiffeners, in case connection with the continuity plates this parameter increases about 39%. In addition, the proposed C-E-VP and C-E-SP connection provide a rigid and safe connection to acquire rigidity of 95% and 98% respectively. But C-I-CP connection is classified as semi-rigid connections.

• 복식
• /
• 제7권
• /
• pp.115-126
• /
• 1983

Myun Bok originated in China was introduced into Korea in ancient times. Some evidences show that it had settlled down as our own official robe already under Koryo Dynasty. And Koryo made her own regulations on Myun Bok. Kook Cho O Rye Eui(國朝五禮儀) of Choson Dynasty has comparatively detailed explanations on the way of cutting and shapes and materials. And the regulations are modeled after those of Ming China. But it has been impossible to know whether the regulations of Kook Cho O Rye Eui were strictly kept or not, because we have not enough remains through which to see it. And then we got very useful materials, Eui kue(儀軌), which are well known but have not been used in studying the history of costumes. Every Kook Chang Do Gam Eui Gue(國葬都監儀軌) have the provision of the so-called Pok Wan(服玩) set which includes the imitations or the full set of Myun Bok. And the provisions show us the illustrations colored in detail which help us understand the real shapes and the transformations of Myun Bok. After surveying the Pok wan provisions, author arrived at conclusions as follow; 1) Myun Boks are not always made in the same shape and colors. 2) The Provisions of Kook Cho O Rye Eui were not always kept strictly due to the lack of detailed directions.

• 복식
• /
• 제65권7호
• /
• pp.60-74
• /
• 2015

It is considered that jacket was widespread in the 19th century due to its simple and convenient production technique. This study aims to explore the western women's jacket in the late 19th century, which is the basis of modern women's outwear, and we focused on the patterns and construction, the technical aspect of the jacket. We researched pattern books and preserved costume materials, and the study methods are as follows: First, we analyzed the pattern of the jackets from the pattern books and preserved costumes. Second, we analyzed the construction of the jackets from the preserved costumes and compared it to previous researches. The study results are as follows: 19th century jacket consisted of a bodice, a back bodice, a side panel, two-piece sleeve and a collar. The front bodice had cuttings and a dart to make the jacket fit the shape of the body and the two-pieced leg of mutton sleeve, puffed at the shoulder. Various styles of collar and neckline existed. The pattern suggested diverse ways of designing a jacket, such as cutting with partition, dart and pattern expansion that focused on three-dimensional effect at that time.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.204-210
• /
• 2010

The inner structure of the triangular separate bar (TSB) was improved to enhance the productivity of the TSB flow meter by simplifying the machining process for making the flow meter. The cross section of upstream and downstream pressure chamber in the TSB was changed from triangle to circle, which make it possible to substitute the wire cutting by drilling in the process of machining the pressure chamber. The flow rate characteristics of the flow meters was calibrated with a laminar flow meter. Six kinds of flow meters whose diameters of pressure tap for measuring pressure of both upsteam and downstream pressure chamber were different one another were made. The effects of the pressure tap diameter on the flow rate characteristics of the TSB flow meter was little. The mass flow rate characteristics of the flow meters with increasing a non-dimensional parameter which includes the gas temperature, exhaust gas pressure and differential pressure at the flow meters and atmospheric pressure shows nearly linear relationship with a correlation coefficient of R=0.998.

• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.714-719
• /
• 2011

The surface roughness depending on the machining method is very important because is produce a finished product through riveting, sealing, bonding, and special paint in order to curb the turbulence and air resistance which occur between the sheets. Aluminum alloy 2024 which is widely used for interior and exterior material of aircraft are tested. Jin-young JW-60C wire cutting machine was used in this experiment. In this paper, the experimental investigation has been performed to find out the influence of the surface roughness and surface shape characteristics on the wire-cut EDM of discharge energy in aluminium alloy 2024. The selected experimental parameters are peak current, no-load voltage, off time and feed rate. The experimental results give the guideline for selecting reasonable machining parameters. The high discharge energy on the idle time, almost no change in surface roughness can be seen.