• 보건의료산업학회지
• /
• 제11권2호
• /
• pp.105-115
• /
• 2017

Objectives : The aim of this study was to suggest the optimal cut off for best, very good, good, slightly bad, and bad grades. Methods : The subjects were recruited from 4 areas of South Korea and 487 questionnaires were analyzed. The nominal and continuous self-rated health questions were used to reveal the optimal cut off and the Short Form-12 Health Survey questionnaire (SF-12) was additionally used. Frequency, Pearson's correlation coefficient, and ROC-curve analysis were used; the significance level was <.05. Results : Subjects assigned 15(3.1%), 90(18.5%), 237(48.7%), 130(26.7%), and 15(3.1%) to best, very good, good, slightly bad and bad groups respectively. The self-rated health score was associated with total Component (r=.563, p<.001), Physical Component (r=.520, p<.001) and Mental Component of SF-12 (r=.303, p<.001). The optimal cut off was 80.5, 70.5, 53.5, and 40.5 for best, very good or more, good or more, and under slightly bad respectively and area under curve was 0.898, 0.908, 0.945, and 0.908 accordingly. Conclusions : This study suggests that the self-rated health score and grade could be integrated with the optimal cut off.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.9-11
• /
• 2000

To increase the device linearities and the breakdown-voltages of FETs, Al$\sub$0.25/ Ga$\sub$0.75/AS / In$\sub$0.25/Ga$\sub$0.75/As / Partially doped channel FET(DCFET) structures are proposed. The metal- insulator -semiconductor (MIS) like structures show the high gate-drain breakdown voltage(-20 V) and high linearities. The devices showed the small ripple of the current cut-off frequency and the power cut-off frequency over the wide bias range.

• 지구물리와물리탐사
• /
• 제12권1호
• /
• pp.154-162
• /
• 2009

단극 및 쌍극 음원을 이용하여 S파속도 결정에 큰 영향을 미치는 분산특성을 연구하였다. 이를 위하여 동일한 물성을 가지면서 공경을 달리하는 3종류의 시추공모형(${\Phi}520\;mm$. ${\Phi}150\;mm$and ${\Phi}76\;mm$)을 중심으로 이른 분산곡선을 구하고 공경과 공내검층기 존재 유무에 따른 분산 특성의 변화를 비교 분석하였다. 분산곡선의 형태는 단극음원에서 시추공 내의 공내검층기 유무에 크게 영향을 받지 않고 비슷하게 나타난 반면에 쌍극음원에서는 공내검층기 유무가 큰 차이를 보였다. 반면에 절단주파수에서는 쌍극음원에 비하여 단극음원에서 공내검층기 유무에 따른 차이가 크며 특히 소구경 시추공에서 큰 차이를 보여 단극음원을 이용한 토목시추공 음파검층에서 주파수 선택이 매우 중요한 변수가 될 수 있음을 보였다. 수치모델링결과, 절단주파수와 시추공경과의 관계는 기존에 알려진 일반적인 반비례 관계보다는 지수함수적으로 감소하는 관계임을 확인하였으며, 분산모드의 종류나 공내검층기 유무에 상관없이 각 환경에 있어서의 절단주파수 값을 지수함수로 표시할 수 있었다. 특정 시추공 환경에서의 분산곡선 및 분산특성들은 과거 연구결과들로부터 비교적 잘 알려져 있지만 분산곡선의 직접 비교에 의하여 분산특성에 미치는 시추공경과 공내측정기 영향을 보다 구체적으로 밝힐 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1597-1609
• /
• 2015

This paper introduces the fundamentals of the conventional LC low-pass filter circuit in the fractional domain. First, we study the new fundamentals of fractional-order LC low-pass filter circuit including the pure real angular frequency, the pure imaginary angular frequency and the short circuit angular frequency. Moreover, sensitivity analysis of the impedance characteristics and phase characteristics of the LC low-pass filter circuit with respect to the system variables is studied in detail, which shows the greater flexibility of the fractional-order filter circuit in designs. Furthermore, from the filtering property perspective, we systematically investigate the effects of the system variables (LC, frequency f and fractional orders) on the amplitude-frequency characteristics and phase-frequency characteristics. In addition, the detailed analyses of the cut-off frequency and filter factor are presented. Numerical experimental results are presented to verify the theoretical results introduced in this paper.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.142-142
• /
• 2011

Microwave diagnostics method for plasma science and engineering is vigorous research area for its good characteristics such as high sensitivity, reliability, and broad measurement spectrum from low density plasma to high density. We investigate mechanism of microwave probes (hairpin, impedance and absorbtionf probe) and apply it for interpretation of full transmitted spectrum of cutoff probe. Mechanism of the spectrum having same key roles of I-V curve of Langmuir probe is not exactly revealed yet in spite of its importance. This study elucidates physics behind it using a circuit model and E/M wave simulation. Circuit model reveals exact cut-off peak frequency taking account of a collision frequency and a plasma frequency and it enable precise diagnostics of plasma densty from low pressure to high pressre. Cut-off like peaks have been obstacle for choosing cut-off peak is analyzed by E/M simulation and one of cutoff like peaks made by probe holder used for acquire plasma density with cutoff peak applying the hairpin relation. Furthermore, phase difference method for plasma density is conducted. This method uses a single microwave frequency source and it is low-priced.

• 한국콘텐츠학회논문지
• /
• 제10권5호
• /
• pp.285-295
• /
• 2010

소음에너지가 시작되는 주파수 즉, 선행 모음이 끝나는 지점을 절삭주파수라 한다. 본 연구는 구개파열아동과 정상 아동을 대상으로 마찰음과 파찰음의 절삭주파수 값, 후행모음에 따른 절삭주파수 값, 절삭주파수와 비음 치의 상관관계를 알아보고자 하였다. 연구의 대상은 서울 및 경기 지역에 거주하고 있는 아동으로 구개파열 진단을 받고, 생활연령이 6세 이상인 아동, 생활연령과 성별을 일치시킨 6세 이상 정상아동 각각 6명씩 총 12명이었다. 실험과제는 마찰음 및 파찰음의 무의미음절 환경과 문장 환경(50환경)으로 구성하였다. 구개파열 아동 집단은 정상 아동 집단에 비해 마찰음, 파찰음의 절삭주파수 값이 무의미음절 환경 및 문장 환경 모두에서 낮게 나타났다. 구개파열 아동과 정상 아동의 절삭주파수와 비음치 간 상관관계 연구 결과 정상 아동 집단에서는 무의미음절 환경과 문장 환경 모두에서 통계적으로 유의한 상관관계를 보이지 않았으나 구개파열 아동 집단에서는 문장 환경에서 통계적으로 유의한 상관관계를 보였다.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.1005-1009
• /
• 2010

This paper presents a digitally-controlled filter calibration technique for biquad RC filter using self oscillation. The biquad RC filter is converted to a fully-differential ring oscillator by changing its resistor connections, where the oscillation frequency reflects the cut-off frequency. The proposed calibration circuit measures the oscillation frequency by counting with a fixed higher-frequency clock and then tunes it to a desired frequency with a digital frequency-locked loop including a PI controller. Because the proposed circuit directly measures the cut-off frequency of the filter itself and calibrates it with the small area digital circuits, the area and the power consumption are much small compared with conventional works. When it is implemented in a 65nm CMOS process, the calibration circuit except the filter consumes the area of 80um X 50um and power consumption is 443uA at 1.2 V supply voltage.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.181-181
• /
• 2012

The microwave probe for measuring plasma density is widely used for its advantages: First, it is not affected by the reactive gas. Second, it can measure local plasma parameters such as plasma density, plasma potential and plasma temperature. Third, it is simple and robust. A cut-off probe is the one of the most promising microwave probe. Recently, Kim et al. reveals the physics of the cut-off probe but the effect of the sheath on the determination of the plasma density is not explained. In this presentation, for taking account of sheath effects on determination of plasma density from the cut-off peak, a simplified circuit modeling and an E/M simulation are conducted. The results show that occupation ratio of sheath volume between two tips of the cut-off probe and subsequence pressure condition mainly change position of the cut-off peak with respect to plasma frequency. Magnitude of relative voltage taken on the impedance of sheath and the impedance of bulk plasma can explain this effect. Furthermore, effects of gap size, tip radius, and tip length ware revealed based on above analysis.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.120-131
• /
• 2007

A comprehensive short channel analytical model has been proposed for High Electron Mobility Transistor (HEMT) to obtain higher cut-off frequency maintaining the reliability of the device. The model has been proposed to consider generalized doping variation in the directions perpendicular to and along the channel. The effect of field plates and different gate-insulator geometry (T-gate, etc) have been considered by dividing the area between gate and the high band gap semiconductor into different regions along the channel having different insulator and metal combinations of different thicknesses and work function with the possibility that metal is in direct contact with the high band gap semiconductor. The variation obtained by gate-insulator geometry and field plates in the field and channel potential can be produced by varying doping concentration, metal work-function and gate-stack structures along the channel. The results so obtained for normal device structure have been compared with previous proposed model and numerical method (finite difference method) to prove the validity of the model.

• Structural Engineering and Mechanics
• /
• 제77권5호
• /
• pp.571-586
• /
• 2021

The present paper studies the influence of the inhomogeneous initial stresses in the bi-layered hollow cylinder and it is assumed that these stresses are caused by the hydrostatic pressures acting on the interior and outer free surfaces of the cylinder. The study is made by utilizing the version of the three-dimensional linearized theory of elastic waves in bodies with initial stresses for which the initial stress-strain state in bodies is determined within the scope of the classical linear theory of elasticity. For the solution to the corresponding eigenvalue problem, the discrete-analytical method is employed. Numerical results are presented and analyzed for concrete selected pairs of materials. According to these results and their analyses, it is established that, unlike homogeneous initial stresses, the influence of the inhomogeneous initial stresses on the torsional wave dispersion has not only quantitative but also qualitative character. For instance, in particular, it is established that as a result of the initial stresses caused by the hydrostatic pressure acting in the interior free surface of the cylinder, the cut-off frequency appears for the fundamental dispersive mode and the values of this frequency increase with the intensity of this pressure.